Programming a Chevy Garage Door Opener | 3 Button Garage Door Opener on 2023 Chevy Traverse

In this video, I show how to program the 2023 Chevy Garage Door Opener. You will need to have your garage door handheld transmitter, be in your vehicle, and be pulled out of your garage. To program, hold down the button your want to program and you will see the red indicator light blink. Push your garage door transmitter while holding it 1 to 3 inches from your buttons. The light will blink quickly, releasing your transmitter. Push the button you just programmed and your garage door light will flash indicating the button is programmed. Release and hold down and your garage will operate.

[@keithe54]

Very helpful, i have a liftmaster garage door opener and the programming worked the same way as you showed in the video.

[@sticksnstones140]

I have a 2018 chevy traverse and a genie 1035. Clear all the codes on the chevy by holding 1 and 3 until it blinks rapidly. Once cleared, with the garage door open, hit the program button on the genie for approximately 1.5 secs and let go it will blink purple. Go to the car and hit the button desired on the car and hold the button on the remote that comes with the opener. You will see the rapidly blinking light that he talks about. This should sync.
I did a little trial and error, but this is a super helpful video!

[@richo8767]

Thanks for the comment. I could not figure out why the button would no longer program this way, but I had to clear the codes that way and then it worked.

[@anvildesignartphotographyl5646]

i have a genie garage door opener, everything worked with programming the car. but, had to push the learn button on my garage door opener, and then 2 seconds with the button i selected in the car. worked! took forever to figure out that i had to push the learn button.

[@jessicapurkey542]

Worked on first try! Super easy! Thanks so much!! 😊

[@RandomReviewsHowTos]

You’re welcome 😊

[@dschmidt1140]

Thanks! Worked perfectly.

[@funkatronic]

Worked on a 2023 Z71 Tahoe. Thanks for sharing friend!

[@RandomReviewsHowTos]

Glad it helped!

[@tonysfarks5070]

Thank you sir
Quick simple n easy

[@Mikeso367]

Thanks! Worked!

[@bxb590]

Thank you for making it so easy.

[@puppetworld3417]

Thanks for the video it worked

[@terrancealexander4299]

Thanks

[@danm793]

Any idea how to program without having a remote???? This is called Rolling code method? Please advise

[@omdc535]

This technique did not work for my 2021 Blazer. The Genie owner's manual did not work either. I had to push the Program button on my Genie 2028 until the light flashed purple. Then, I simultaneously pushed the hand-held remote button and in-car button until the in-car light rapidly flashed.

[@maggiesphotography4257]

Thank you !

[@darrendandridge8786]

Thank you

[@worldpoole]

Thanks I tried no success it might have needed to be reset. But it did work on 2.

[@sticksnstones140]

Just left an instruction filled comment on this page. Not sure what opener you are using, but check my comment and see if you haven't figured it out.

[@BrianaAnderson-po5sc]

What if you don't have a garage door opener? My car was stolen and that was one of the things we didn't get back when it was recovered. I just got my equinox but we still don't have a remote 😢

[@RandomReviewsHowTos]

You can probably order a replacement and reprogram it all. I'd recommend that anyway considering your car was stolen. I'm sorry that happened to you.

[@BrianaAnderson-po5sc]

@@RandomReviewsHowTos we already reset the box I just didn't want to have to pay for another one if I didn't have to

[@Rachel_Lala]

I cannot find my garage door opener, is there anyway to program without it?

[@sticksnstones140]

You can buy an aftermarket remote off whatever site and program that to the opener. Once the opener is set you can program the car. I also left instructions for how I did mine in a previous comment.

[@glanphear588]

Hi, if i may ask. Do you like your 2023 Chevrolet Traverse so far? And which trim do you have RS, Primer or High Country? I'm possibly purchasing a Traverse High Country model this week.

[@rzbrown3]

We just got a 2020 RS and it’s very nice

[@Rachel_Lala]

I just got the 2023 RS, I love it!!!

[@pattyl.3290]

I just got a 2022 RS it’s very elegant, so much technology easy to use, runs smooth spacious, you won’t regret it.

[@dennisrees9615]

23’ redline we love it

[@earlcarter4682]

Where you holding the car button and the garage door opener at the same time for 5 sec or did you release the garage door opener

[@RandomReviewsHowTos]

Holding at the same time. It's essentially picking up the signal and programming itself.

[@ricardocabrera7189]

It didn’t work for me. I have a Genie model 1128B garage opener

[@sticksnstones140]

Hey man just left a comment with instructions in case you haven't gotten it fixed yet. Might be the model or method that is getting you. Check my comment above

[@user-bn7gn8dw8r]

Can't get any of the lights to come on

[@Dabtrain]

Didnt work for my chevy tahoe

[@januarymcneal5091]

Can I do this without garage door opener

[@RandomReviewsHowTos]

I'm not 100% sure, but I don't think so.

[@angeldolata8056]

I would like to know the same…

[@sticksnstones140]

No you can't. But you can buy any opener online and sync it to your opener. And then you can follow his methods to get it to work. I also left a comment that has instructions for my Genie model that had an extra step.

[@ashleycall9417]

ugh it didnt work for me :(

[@RandomReviewsHowTos]

I'm sorry - same model? Try slowing down with the steps...