How To Install Fascia On A Birdbox
Вставка
- Опубліковано 26 чер 2021
- In this video I will show you how to install fascia on a birdbox. I will be using aluminum fascia on this birdbox. The soffit was already installed before I made this video.
🟡 Check out my Amazon store! 👉 www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that help support the channel at no extra cost to you)
My Soffit/Fascia/Siding Tools amzn.to/3mdoBlZ
Tin Snips amzn.to/3GZO0Hx
My Tool Belt Setup amzn.to/32kmcyz
Tool Belt amzn.to/3E4v1Kc
Hammer amzn.to/3E8kldp
Tape Measure amzn.to/3J68hNx
Speed Square amzn.to/3J0cPoF
Chalk Box amzn.to/3p9ziYv
Utility Knife amzn.to/3ecJPM9
🔴 Subscribe for more home building tips to save a TON of money here:
ua-cam.com/users/theexcellentlabore...
If you need to know how to build a birdbox - • How To Build A Bird Bo...
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals. .
I agree with the previous comment. I wrapped my first bird box today and I could not have done it without your help. You are a good instructor. While I have seven more to build and wrap, I have one that is unique. No matter how I try to build it looks like crap so I don't nail it. I have to figure it out. THANK YOU!
I'm actually an interior finish guy and have never attempted to cover a bird box... I figured I needed a roll of tin and a break but this is far superior! I only have 2 birdboxes and this video saved me from renting a break for them.
Where the fascia returns to the gable wall we would leave it long and bend out a tab to nail to the gable. Where you notched out the return for the wood fascia don’t break out the tab leave it bent out to flash the joint. Where the rake cap runs by the ‘bird box’ we install some aluminum under sill trim to house the cut edge. Less visible nails all around. I often used a small 15 degree parallelogram block to fold in end tabs on windowsill covers. Fascia return bends can be done in the ends of the brake. Invest in some flanging pliers and red lefts and green rights. The Vee you put in fascia bottom cuts is necessary to allow an over bend offsetting spring back.
Awful heavy hammer, for such small nails.
You should use 8” fascia, then you wouldn’t have to Mickey Mouse it, with that extra strip. Sorry
Man. This is the best video ever!!! You don’t know how much you have helped me build my work shop. Keep them awesome videos coming. Your awesome!!
That little piece could have been behind the bird box wrap around. So looking up you dont see the seam.
Nice technique. If you use a regular roll of metal, however, and a break, there’s no need to extend the height of the bird box. Also, capping the corners is a simple way to enhance the professionalism and aesthetic of the metal.
Where do you buy the aluminum fascia?
veddddy nice. "Not tooo hard to do." - The Excellent Laborer. lol ... none of us excellent yet
Thank you brother just wrapped up our siding just before the winter hits here in the Poconos!
I just wanted to thank you so much for your tutalidge!!! Your videos have been very helpful to us!!
Thanks for taking time to record this video while you’re working, great job. You're well-spoken and a good teacher. I like the trick of turning the blade around for nicer cut on the vinyl soffit. An alternate I did on my house is to cut the vinyl in a jig like yours and use a 7 ¼” diamond blade (like a tile saw) on a cordless saw. Works really good.
Video is best I seen so far explain easy and simple. Thank you for your time!!!
Good explanations, good demonstrations, no fancy tools, i think you know what you are talking about. Best video on soffits and fascia that i saw, i know what to do now, thank you very much from Montreal Quebec.👌✌
Such thorough instructions. Just subscribed. Great video, thanks.
You are amazing bro! Explained things well with no unneeded commentary. This is exactly the video iv been looking for! Please keep doing these videos🙏🏻🙏🏻
Well made videos. Thank you!
Amazing video, thanks.
Check out my Amazon store for the Trim Nail Punch!