Mid-Engine V10 Volvo 244 Project! Fix all the faults!?
Вставка
- Опубліковано 15 вер 2024
- If you want to support the project, buy merch from: www.busbil.com
My instagram:
/ peterbjorck
My second youtube channel (Swedish):
/ busbil
If you want to support me to do more videos:
www.buymeacoffee.com/peterbjorck
My Facebook page for my cars:
/ bjorcksbusbil
My company: www.bjprace.com
I have no clue what you are talking about in your videos, still I love watching you geek out.
Expensive legos make car go fast!
VL = Vorne Links = Front left
VR = Vorne Rechts = Front right
HL = Hinten Links = Rear left
HR = Hinten Rechts = Rear right
Greetings from Germany! :D
@@StealthFX9 👍
Hätte ich nicht besser erklären können… 😂 👍 also greetings from 🇩🇪
BH- butt hole- rear middle
This car needs to be shipped to America to drive Sick week!!!
That is a dream to do one day!
You have built an absolut beast. Love everything you do, your neighbour, Finn jävla.
is he a noisy neighbour? lol
@@funkytransport in all the right ways
Great work as usual Peter. A few points to note regarding the A/C system. The discharge pressure converted to condensing temperature, should be about 10-15°C above ambient. The suction pipe temperature out of the inter-chiller should be between 6-12°C above the evaporating temperature of the gas, this is called superheat. Assuming that it's R134a and the suction pressure is 2.0 bar, then the evaporating temperature is +0.6°C, then the temperature of the suction pipe leaving the inter-chiller should be +6.6°C to +12.6°C, load dependant. If the temperature difference is much higher, for example +20°C , then the superheat is too high and the system is low in gas or the dryer/expansion valve is blocked if the sightglass is full.
I hope this helps .
Okay, I am going to watch the whole series from the beginning. But one thing I can say at this point is: YOU ARE INSANE!
Babe wake up, new Peter Bjorck video just dropped!!!
Holy molly. If my "napkin math" is right, based on the top speed in each gear for an R8, that car did a 10-150 kph pull in a matter of 4-5 seconds on street tires. Fan va gött.
Fa’an va gött!
jaa-a, vad får vi till middag? Accelering. De e gött de!
Now u have steering angle and abs Module 💪 i think u should leave Shift- rpm where it was from Factory, it is quite aggressive especially in Sport Mode! And when i remember right it can stop u from shifting gears when it sees too much difference in Engine power / vehicle Speed so it will Not burn up the clutches
Hahaha Cletus sunglasses!! Hell yeah Brother!!!
Yes i bought them from his wife in Maryland last year.. !
Yay! My favourite project online is getting another updates! I'm glad to see problems are getting fixed!
Can't wait to see this thing laid out a decent 1/8 & 1/4 mile time!
I love this one too 😍
I am building my dream V12 supercar with the OG zonda engine 👍
Never thought I’d like a Volvo. That day has come. Just subbed in Australia 👌🏻
Not only does it go fast as hell. It looks sick also!
Lovely stering wheel nice concept plus using wire's from air bag great 👌 I love Scandinavian engineering
Alltid lika imponerad över din otroliga kunskap och noggranhet 🏆 Swedish engineering at its best 🇸🇪🏆🇸🇪
You can also use the 3D printer to make an insert for the steering wheel that fits the control unit.
The mad scientist of Car UA-cam 🤘🏻
Love your videos
Hello from uk 🇬🇧👍🏻amazing build !
100 % 😍
I am doing my best to represent us brits with my V12 build with the OG zonda engine 💪
That is so fast. Going to be good to see it at the airfield. best of luck
absolutely insane knolodge and crazy build.. I love it
I can't wait to see this 100% and what kind of times it will run. The fact it was built in the amount of time it was is impressive. Not to much out there that sounds better than that. Keep it up, we all want to see this thing ripping!
So as far as I know, the R8's or Lamborgini's are not real all-wheel drive vehicles. The front axle can normally only transmit 150 to 180 Nm if the rear wheels have no traction. This is a kind of vario-transmission on the front axle (similar to a flywheel, I think it's fluid-based). There are modified versions, but even these only manage 250 Nm, then the original component is the end. Take a closer look, because the ratio is never 50:50 or 40:60 from front to rear. Normally it's more like 20:80. That's a cheated all-wheel drive. Also for weight reasons. Kind regards Peter
No this is a bit different than the earlier versions.
This is from Audi self studdy program:
"The drive power for the front axle is transferred through the
transmission output shaft. The reduction ratio of the trans-
mission output shaft is such that the circumferential speed
of the front wheels is slightly higher than the circumferential
speed of the rear wheels. This difference is referred to as
"lead". Depending on the driving situation, it is the basis for
the controlled transfer of up to 100% of drive torque (drive
power) to the front axle. "
"Irrespective of the engine torque and selected gear, the
all-wheel drive clutch can transfer a portion of the avail-
able drive power in a controlled manner. In this way, up to
406 lb ft (550 Nm) of torque are transferred to the front
differential pinion shaft. Refer to page 11. The reduc-
tion ratio of the differential produces up to 1106 lb ft
(1500 Nm) of torque at the front axle."
Nice video dude! Please more videos about this monster 🙏
I am missing your 2jz Supra those videos were awesome, you have built quite a monster with the Volvo gini waiting for your next video.
These are the videos that make me go "man, maybe building a lambo swap volvo isn't that hard when you break it down piece by piece" lol
@@UKBUILT ok ok we know by now, jesus christ
this is my favorite build on yt. all of yt.
Love it Peter it sounds awesome you are a very clever man I enjoy watching your work and your explanation keep it up 👍
Hello friend, since the beginning of your Volvo project, seeing how it evolves and evolves, you are great, friend, greetings from Salamanca, Chile 🇨🇱🏜️😊
Sweet Cleetus glasses, I wear that same pair every day
This Volvo is absolutely sick 👌🏻
Hi peter , i m a fan of you for a long time ... the supra time ! it was like close to 20 years ago 😅 ... i m old now 43 years old 😂
it is always a pleasure to see how you are tuning your car ... it is always difficult to ajust everything with so much electronik , but it looks like you are going to the right way !
congrats and i cant wait to see the next steps !
Greetings from France bro 👌
Love your videos, so nerdy, detailed, informative and a good dose of craziness.
Interchiller FTW
Great to see you solved the issues
Awesome work as always 👍
I hope my V12 build turns out that good 😎 I am using the OG zonda engine
always love seeing you work on this, it's very inspiring!!
Hi,from Italy,very impressive car
Great Work - as allways. Und Du sprichst Deutsch! Omniman-Peter.
15:30 I would keep some (a lot) of FWD at high speed: you generally don't need it but it shouldn't hurt. And the day you launch on a wet/greasy surface and the back end wants to swerve at 200 kph, you'll be happy the front is pulling...
What an absolute monster!!
Great work as always! Absolutely mental!
Some very cool details, enjoyed that a lot, you’ve got some skills Peter
that is one awesome machine! thank you for charing it with us
Glad you are ironing out the big problems 😀
Hejsan Peter. What a beast. I love your project and watch every day for new videos from you. I also love Sweden. 🇸🇪 if I did what you are doing here I Denmark I would be locked far away by the police and they will destroy the car 😮
Greeting from Denmark 🇩🇰😄
That sounds like a beast
Full props for all the work & thanks for the videos ... and the appearance of VCDS made me laugh (I have that app for my old Golf R, and you're using it on a monster Volvo/ Lambo / not even sure at this point). Success to you!
Hey up Peter your car is beautiful work and a full credit to you, nice seeing the step's getting closer to the goal super looking forward to these up coming race's should definitely do well in the 200m so in quarters as well, that much electronics would drive me insane you're a good fella keep it up
Congrats for the progress and good luck for the coming races :) thx for the video!
Peter, I am in awe of your builds, thanks for sharing. Cup of coffee well earned. 🦾
Wow, that thing is FAST!
Hello Peter!! I’ve just been watching the latest video from Real Mechanic Stuff and they’ve shown a clip of one of your videos. Which hopefully serves as a bit of exposure for you. (Possibly unfortunately) it was one of your spectator videos from a Liwa hillclimb, but we must look on the bright side, there’s no such thing as bad publicity (TnCs apply, see in store for more details 😀) at least in this case anyway. I hope you’re well anyway and full on f the will to win (next year’s StreetWeek at least!) :) :)
I really like how you used the OEM steering clockspring to pass data to your CAN-button-thingy module but it looks atrocious. Maybe you could simply model and print a round case that sits in lieu of the airbag and to which you would relocate all 8 buttons?
Perfekt till middagen efter en lång och stressig dag på jobbet
Coming along great 💪 thanks for the update
Greetings from Amsterdam
I got confused seeing a Circle K in Sweden, I thought you had come to America❤
it looks insanely fast! Awesome machine!
5:50 you should have a shirt like that Peter haha 😉
For non-swedish speakers his shirt says: Never fucking give up!
And that is how every proper Volvo should be refueled! 😎 Awesome job mate! Cheers from Finland! Any plans to bring it to finnish tracks someday?
Love your videos. Very cool car.
Sounds like you just got a bit of learning and programming to do in order to get it the way you want it.. you dont need to focus on the laser height stuff for a while, only use those on rwd drags to throttle based on your separation but you have 4wd variable so getting all that set up will take a few nights of tinkering with it.. but hell, you need to get a nice wrap put on it or a paint job and get it styling .. your famous in that thing and needs to look the part.. keep up the good work though sir. Dont put her in a ditch..
Looks like you're having a lot of fun Peter, so glad to see you getting to enjoy all the hard work. I hope your testing goes well and you can make some more progress. Such an interesting project - will you be able to take the dog from your wagon in the passenger seat for the next race?
Go the atlas copco strap, machines all over the world held together with those bad boys 😂
Very cool!
Alltid roligt att titta på dina videos :)
Snyggt jobbat 😊 Alltid lika kul att följa dina projekt
7:00 - Make the original buttons work instead. Add some individual leds for feedback instead of backlights. 😅
Yes officer, I may have been in sixth gear revving nearly 7000 rpm. But you see officer this car has a very short final gear!
Det här kunde aldrig den 240 in drömma om när den en gång lämmnade bandet på Volvo
Amazing cars bro
Fantastic progress, great job!!
awsome progress man
wish we got pump e85 here in uk
great idea with the dash and blacvk screen. sometimes too much info isnt good. best to let ecu cut car if issues
for pad in airbag spot, 3d print a spot for it fill the round corner and just clip it in :)
@20:08 Holy snikies!
Jädrar vilken king du är Peter 🎉 följt sedan strax innan du började med Volvoghinin 245
Kör sånna svarta snabblåsningar på min bil, åkt både 300km/h drifting där slitageytor har släppt och på isen aldrig släppt någongång 🙂
Hope you printed those in ABS, or atleast PETG. Because PLA will likely deform from the heat. Well not a big deal, you will notice when it happens 😀
Följt dig sen du hade svarta 242qn för hundra år sen .sjukt duktig!
Repii ku reuma 👍
Do you have ac compressor tuned to low piston throw when engine is in high rpm ? If not, it will blow again soon. Regular compressors turns off usually around 3k - 3.5K rpm to not push them to over rev.
Had been amazing if someone had the skillz to swap that AUDI R8 picture on the dash to a Volvo 142. ;)
Nice work!
It goes like the clappers
Älskar hur hastighetensmätaren är blurrad 😂 det var inte en kilometer över 70 det där 😊
love the car brother ship it to the US and do sick week like @davy said
Maybe retrofit some projectors for night driving, cant see much now 🙈
Loving you vids and watching the project evolve. Could I ask if you have a link to the quick disconnects you showed us? thanks.
Looks like the dialling in is going well. Just 2 questions, the oil pressure looks high? 6 or7 bar. And in terms of the dynamics 4 wheel drive. I would imagine, subject to testing, to minimise the front wheel drive, may be 10% in first gear launch, to reduce bogging and minimise load on transmission input shafts, particularly when using slicks?
realy nice!!!
Great video!
"Cold engine", "cold oil", it would still be interesting to display the temperature. Is it cold like 40°C or like 65°C?
😱🔥🔥🔥🔥🔥
0:09 I swear I heard "with my crazy worldwar II 44 here"
Though we never thought that we could lose
There's no regret
If I had to do the same again
I would, my friend, Peter
If I had to do the same again
I would, my friend, Peter.
V10an låter för jävla gött
Smart med "Burnout Mode"
Kan ge tips för ac om du behöver 👍
Skönt att det fungerar!🎉
22:54 I didn't even know that air in an intercooler could be cooled with AC
are your intercoolers on refrigerant?
like air/refrigerant instead of air/water.
ive thought of doing a chiller for an air to water system that i could also use for in car a/c on the street.
Jag skulle vilja se samma sorts breddning på framskärmarna som på bakskärmarna. Tror att det hade gett ett bättre stuk 😊
Jag hoppas kunna hitta på något bra breddnings kitt i vinter. Just nu är bara preliminär nödlösning :) Framskärmarna gjordes från original till detta på två kvällar! :)
A/C cooling the charge coolers for 🤯
My brother said he worked on a old ferrari deno with a awful turbo kit, with a terrible charge cooler made from a old oil cooler connected to the A/C but the people placed it before the turbo instead of after but he said it didn't matter because it never made 1 psi of positive boost pressure 😂 think he said lucky I was only fixing a water leak and🙈 to the rest
The best “great success “ after borat’s