etrailer | Aries Bull Bar with Removable Skid Plate Installation - 2018 Ram 1500

Click for more info and reviews of this Aries Automotive Grille Guards:
www.etrailer.com/Grille-Guard...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.com/tv-install-a...
Today on our 2018 Ram 1500 we're going to be taking a look at and showing you how to install the Aries Pro Series Bull Bar with Removable Skid Plate.This is what the bull bar is going to look like installed. Not only is it going to protect our Dodge Ram's front bumper, it's also going to add a little bit of style. What's also cool about this is underneath these plugs, these are going to be holes to mount additional accessories such as lights. Not only does this skid plate help protect the bottom of our Ram from tall grass or any other road debris, if you'd prefer it to be removed, it can be. If you do need to remove it, it's really easy. There's these four screws on each corner just like this.
If you do want to mount lights here it will accept round lights up to 5-1/2" in diameter. Keep in mind if you do do that, it will block your front license plate. However, they do offer a relocation bracket that you can find on etrailer.com.The tube diameter itself is 3", which gives it that rugged look. Now in this position from the bumper to the outside edge of the bar, it's about 5-1/2", but keep in mind you can adjust it quite a bit, inward or out, to work for your setup.This bar has a polished finish. However, if that's not quite your style, they do offer many more finishes to match your truck perfectly.
It's a no drill installation and is really easy to do. Let's show you how to do it, now.To begin our install, we're going to need to be underneath the truck that way we can remove the splash guard. Here along the inside of the bumper we're going to have multiple push style fasteners along the edge just like this. To remove them, you can use a flathead screwdriver and lightly pry up the top portion of it. And sometimes if it gives you some trouble, a trim panel removal tool will give you an advantage.
You can pry it up like that and then get underneath the bottom portion and lift it out. Now we're going to do that for all the fasteners along the splash guard.With all of our pushpin fasteners removed, we can get our 10mm bolts removed as well. All right, now to get our splash guard off, we're going to have to start pushing out from one side and as we go along there's going to be some tabs like this that you're just going to have to lift up, like I said, as you go along and pop them free from our splash guard. We're going to do that all the way to the end. There you go.I just want to point out where our attachment points will be.
Up here along the frame rail, it comes to the bumper, our bracketry is going to attach to these two studs and also we're going to use a bolt to attach to the frame right here.Now our next step to proceed, we're going to have to remove these two nuts. We're gonna be using an 18mm socket to do that. All right, do the same thing to both sides. All right, so now we can take this bracket and we're going to put it over our studs. However, I do want to point out these are side specific. If you notice or is a D stamped into the bracket for driver's side, the P will be for the passenger side, so just make sure you got the bracket on the right side.Son now we're going to take it and put it right over the studs and then with our factory nuts that we just removed, go ahead and get those threaded on. Now, all the brackets, when we we're putting them together, we're just going to keep them hand tight. That way there's a little movement and it'll be easier to get everything together.So, next we're going to take our J style bracket and put that up in place. Now this is the same at the other bracketry. There is a D stamped on the side for driver. The other one has a P for passenger. So we're going to install it like this, but the J facing the front of the vehicle. Gonna slide it over the studs and we're gonna put a flat washer on it, a lock washer, then find a nut.Once again, just keep everything hand tight. Now after you get this one done, do the same thing to the other side. Now we can loosely install this bracket.Now, for whatever reason, these brackets are not lettered, but the way we're going to do this is make sure that this angled portion here towards this hook part, this is going to face the inside of the vehicle, or be on the inside of the J bracket. So how we're gonna do this, just set it up there, there's gonna be a bolt that attaches together right here. But I did find it makes it a little easier to loosely install this bolt first. This will be the bolt that has a little finer threads and is gold in color. We're gonna put on our lock washer and then our flat washer. Go ahead and get this started. And we can take our other hardware, should be the smal

[@sion247]

A very good job! Thanks 🙏 buddy

[@etrailer]

Thank you for the feedback. Check out this bull bar in the following link to our website.
www.etrailer.com/Grille-Guards/Aries-Automotive/AA35-5005.html

[@user-xj3et8fm8b]

thanks

[@etrailer]

We are happy to help! Check out the following link to see this bull bar on our website.
www.etrailer.com/Grille-Guards/Aries-Automotive/AA35-5005.html

[@Tylnorton]

I got the rough country with led bar, very similar brackets and everything, I can NOT get the bolt for support bracket to go up.

[@etrailer]

We don't carry Rough Country products at this time, so unfortunately we haven't had the opportunity to install one of their bull bars. Other than the video you've checked out and the install instructions that we'll link for you below, contacting their customer service people would be your best option to getting this resolved for you.
www.etrailer.com/instructions.aspx?pn=AA35-5005

[@andyl9920]

I wish there are bull guards that doesnt block the license plate on a Honda Pilot. How do u take off the skid plate

[@etrailer]

Here is a link to a page with license plate brackets that work with Aries bull bars. www.etrailer.com/dept-pg-Accessories_and_Parts-pt-License_Plate_Brackets-pm-Aries_Automotive.aspx

[@andyl9920]

@@etrailer awesome. Thanks!

[@badshodi]

Does the bull bar effect you front parking sensors?

[@etrailer]

The bull bar will set off the sensors. You can use a sensor relocation kit so that they can work as intended.
www.etrailer.com/Grille-Guards/Aries-Automotive/AA35-5005.html
www.etrailer.com/Accessories-and-Parts/Westin/45-0010S.html