Mr. Concrete artisan.Release agent ,what do I use ?
Вставка
- Опубліковано 9 кві 2020
- Hey Gang , this is about what I use for release agent, and how to apply.
Concrete artisan Daryl carlyle
Instagram / uniquegardenart
Facebook / / uniquegarden. .
Free mold makers forum/diymolds.com/
UA-cam / mrconcreteartisan - Навчання та стиль
![[EXPLORE] Release Agent Experiments: Number 1](/img/n.gif)
I use caster oil with methyl hydrate. 1 part castor to 10 parts methyl hydrate. I use a pressure sprayer from the dollar store, it give a nice fine mist and it has marker lines to make it easier to mix your ratio.
What can I use as a liquid release substitute for concrete stamping
Thx for your videos
Happy new year
Blessings
It’s the same it’s only labeled as carrier oil because the company is a aromatherapy company and in aromatherapy we call it a career oil because it carries the essential oil to spread over an area of the body.
Hi, I'm a New viewer, what is the best bedding material to use for fiberglass molds?
Great vids! Thank you!
Hi Gris, I hope you are all right and just really busy. I miss your great videos. I have to say I never watched one that I didn't enjoy and learn something.
Hi my friend , everything is fine .We have retired and in the process of shutting down our business,been a crazy summer let me tell ya! Still going to make molds out of the house,Hope to do a vid soon to fill in all you regulars what's been up.
hello. i have afew question. thank you very much for helping me.
When we want to make a fiberglass mold and attach it to a latex rubber mold, can we use this formulation that you mentioned in this video and spray it on the latex rubber mold so that the latex mold can be easily separated from the fiberglass mother mold and not stick to each other?
I have seen some people who use PVA (poly vinyl alcohol) instead of this formulation. Can this material be used too?
thanks,
Is a brush overkill trying to push the oil into the crevices?
Hey gris I hope all is well. I have a question that i am hoping you can help with. I shipped a rather large mold to someone and when it arrived there was a tear in the bottom flange that i am told goes into the inside of the mold . have you ever heard of any way to repair it with some new latex without it delaminating . I know my chances aren't good but i am hoping you have some magic solution
Hey my friend, you should be able to get iso pretty easy from paint shops that sell spray paint for cars, custom spray painters use it
That's a good tip Tom ,I have almost totally switched to methyl hydrate now.
Thanks a lot for sharing this!! Soery I didn't understand. That power washers is just water to clean up right? And then you mis castor oil with alcohol and spray the latex with it? What about vpour? Is it safe? I only have space in the flat. But I'd like to do tiny items. Also I guess I cannot pour any of that stuff, castor, cement down the drain. Wonder if I can let the residue sit until hard and pour away washing water, and scrape the residue to the trash.. ? Thanks a lot again!!
Yes mix the alcohol with the castor oil or use the methyl hydrate instead of alcohol . The yapour is not an issue , if you are indoors using methyl hydrate ,have small fan running or an open window,the fumes evaporate very quickly.Yes clean your tools etc in a large bucket with water ,after a few days use wait until morning and pour off the water and dispose of solids in the waste bin.
Hi bro! amm I have a question I think you can help me, I want to take a fiberglass mold but the piece is made of wood that I have to put on the wood so that the gel coat and the fiber do not stick? Please
If we use talcum powder, will it increase the life of the latex mold and is it not harmful for the mold?
can we use this power on other mold like PVC, silicon and ...ect?
thanks.
Brilliant, looking forward to seeing the new stuff sir. Do any UK viewers know a reasonable priced source for isopropyl alcohol?
This is a buddy of mine Mark in the UK,ask him in one of his molding vids. ua-cam.com/users/dramamask2011
Ebay. Cheapest place in UK.
Gris I need help 😭 How do I get the sticky PVA mould release off of the latex mould after I’ve made the fiberglass mould? This stuff is so sticky... it only pulls off on certain parts of the latex mold 😭😭😭
Hey Samantha, just soak it in a sink or a large bucket of warm soapy ( dish soap).For about half an hour ,every 10 mins or so push them around in the water like an agitator on a washing machine. Give them a good rinse and they should be good to go.
Hi can you recommend anywhere I can buy moulds. Some on ebay are expensive. I'm just starting out. Cheers Niall
Hi, Im making latex molds for candles. Do you think your mold release would be ok for candle making?
New to your videos and interested in trying your release agent, you sat use Caster Carrier Oil - USP , however they make the product with so many different products, like Soy Bean, Grapes and coconut to name a few. Which base product are you using, I do not want staining and have no idea what to use. Thanks for any help. Gerry
You want the one with the latin Ricinus cominus ,thats from the castor bean plant. It won't stain at all.
Great videos thanks. What supplier do you get your latex from?
Im in Canada and use www.sculpturesupply.com/
What type of latex do you use to make molds
I was a member of your forum and have been on for a very long time. How do I rejoin ?
Hey Dale,sorry I haven't been affiliated with the forum for a few years now.Not too sure who's in charge ,perhaps Webb .See if you can contact him .sorry I'm not much help.
can you also apply this on molds other than latex?
hi what would you use as a release agent on your latex moulds before fiberglassing the support caste over it please
Hi Doogi ,in the first part of this vid I go over the release before glass , hope this helps you out! Click the link ua-cam.com/video/_v_lVInerd0/v-deo.html
I I was wanting to do vertical concrete stamps I was wondering what is the true packed that they put in concrete I've been doing research on it wonder if you could tell me
Hi Todd ,sorry not too sure what is in the Tru pak additive.
Would this release agent leave marks on my resin pieces? I need a release agent for my molds, my resin pieces sometimes get stuck in there and end up ripping my mold when I take the piece out
For resin ,I would highly recommend www.smooth-on.com/product-line/universal-mold-release/
Hey brother, my name is Mike and I am the DIY statue guy. I just heard that you were retiring and I was wondering if that was true? I have been a long-time follower and subscriber of yours. I've built everything I've done around your teachings. I'm going to miss watching your videos and learning from you and wish you all the best. Be safe my friend and good luck in all your ventures.
Hey Mike ,how are you ? Those are some kind words my man!It is true ,we just had our last day at the store one week ago. Haven't done a vid because since we announced a closing date at the store ,we got slammed ...crazy busy.I will make a vid in the next week to explain my absence ,just doing all the demo work on the store last week. I should catch up soon and be able to post. Had lots of guesses from folks , big one was did i get Covid?? Nope health is great .Will explain all in the vid and be very transparent.
Again thanks for the kind words ,and all talk at y'all soon.
Daryl
@@mrconcreteartisan I dedicated a video to you. On Facebook groups. The group is concrete craft mastery. Thanks again for everything you've taught me.
How many capable of latex do you have to give?
Do you think there is a acceptable alternative products? Rather than using of silicon release agent?? Many thanks
Do you mean a release for silicone rubber?
❤it😊😊
Glad you're enjoting the vids and hopefully helpful as well.
Where do you buy your liquid latex in Canada?
I know this is unrelated to the video, but my latex rubber mold is turning a brown color on the outside. It’s the original beige color on the inside, but the outside is getting quite dark. The rubber is fine otherwise. Do you know what might be causing this? Thanks in advance 🙂
Oxidation. Sunlight. Or just general hand grime.
Hey fella, I’m in the southern Ontario area as well are you interested in selling a skull casting? Awesome xmas idea for family member that collects skulls?
Can you use this same mixture on urethane 2 part molds?
Yes ,absolutely!
I work with aromatherapy and carrier oils... A carrier oil is simply the base oil to carry the essential oils or other ingredients.. Almost all Essential oils need a carrier oil or another carrier to dilute it as they cannot be applied directly to the skin...
Some are food grade and can be consumed some are not....
Being labeled a carrier oil is not what makes it more expensive...
It is priced by
How it's pressed or extracted
Being human food grade.
Organic
How many pressings the same materials had. Hence extra virgin and first pressings are usually more potent...
Can you help me . Having trouble understanding, in a spray bottle I would pour 100ml of Castor oil than with the remaining space in spray bottle I would fill it all the way up with Alcohol? Thank you mrconcreteartisin
Yes, exactly JuJu .Just make sure you give it a really good shake before and during your application.Sorry for my late response.
@@mrconcreteartisan thank you , can you tell me what concrete you use?
Can I use goo gone as a mold release for silicone molds
I don't think so, some folks use goo gone to remove silicone.
good I buy latex but it is very liquid what product to thicken it and apply with a brush
Two products Cab o sil or something called thick so.
@@mrconcreteartisan In Spain I don't know what that product would be called
I hope to see some of the de-molding in the next vid
You just very well may!
Hey, where you been? I’m missing your vids. Hope all is well.
hello, a query you sell molds of Roman pots, to make cement pots?
Sorry I don't have any Roman style urn molds .
@@mrconcreteartisan ok ty
Do you sell molds ? From where I can buy molds ? Do you have online site ?
I did.I am now retired ,but will continue to make molds iin the winter months .Currently I do not have a web page ,stay tuned and I will make an announcement.
Hey gris me again, looking to pick your brain buddy.
When you do your pour how do you like your sand?
Do you keep it damp or dry as possible?
That's a funny topic, guys swear by either way.I have done both and I like bone dry, I know exactly what my water content will be batch to batch , to almost within a a couple ounces. I never get bleed water on any of my pours.That's just me though.
Castor oil is not sold in my contry can i use an other oil. Can you suggest me one
Maybe use wax, like beeswax or specific release agent wax
Howdy. Where will Methanol be sold locally?
Most hardware store carry it ,Not methanol ,Methyl hydrate!
@@mrconcreteartisan oh whoops!
Right on. Thank you!
Really miss your vids gris 😕😕😕
Don't be sad,I'm actually just starting to set up a little mold making area at the house.Vids to follow.😃👍
Don't be sad ,just starting to move my models and mold making gear to the house ,as well as a little mold station.The vids will return!!😃👍
Is that food safe as well? I would imagine so.
Yes , it is !😀👍
@@mrconcreteartisan thank you. I've been trying to find a good food save mold release. I've seen some other people just use oils (olive, sesame seed, etc) but I wasn't sure if there was something better. Or if it mattered that it had the alcohol in it or not. Thanks again.
The video is good and the variety of moulds that are present in your workshop demonstrate your vast experience and extensive knowledge on this matter. Further, it is great that you are willing to share it with others. However, re the video, the audio needs to be better. The volume of the commentary varies considerably and makes it difficult to follow your explanation. Can I suggest that you keep the microphone closer to you and that you also speak into it. Sometimes your commentary was at a distance from the microphone and, at one point, your were looking down at the material you were demonstrating and the audio was barely audible (I had the UA-cam speaker on full and my Laptop on 72% volume which was loud and clear for your introduction). Great visuals clearly demonstrated matters. I hope you're still making stuff and UA-cam presentations.
Me gustaría aprender y hacer moldes pero no sé inglés.
Puedes hacerme preguntas y puedo usar un traductor para que te responda si quieres.
@@mrconcreteartisan gracias! Hago macetas de cemento estilo romano para vender ( soy principiante ) los moldes son plásticos chinos, 1 como puedo hacer para que no queden tan pesadas? He probado con perlitas politireno, pero estás suben y queda mal, aquí no venden aditivo espumante para alivianar el concreto.
2 Como puedo pulir las imperfecciones del concreto sin romper o dejarlo peor? Gracias por su respuestas
@@selim6446 Salim # 1
La gente ha estado intentando durante mucho tiempo hacer hormigón más ligero, incluido yo. La perlita y la vermiculita están bien, pero nunca se mezclan bien en el concreto. Usé un subproducto de papel una vez que realmente se mezcló bien, pero solo un 5% de ahorro en el peso total.
# 2
¿Quiere usted realmente pulir o reparar agujeros, etc.?
@@mrconcreteartisan las 2 cosas, pulir para que una protuberancia quedé lisa y al rellenar un agujero pulir para que quede acordé con el diseño.
Maybe watch breathing that talcum powder when blowing out those molds...just sayin! :-)
You didn't say how many parts alcohol 🙁
10 to 12 parts isopropyl alcohol to one part oil.
Hello,
Thank you very much for the valuable information you provided. I watched all your videos but no foreign languages :( Can we pour polyester on rubber? Can you give me an e-mail address I can reach
Can you use this release on silicone molds?
Yes, you can .