I gotta know... did running without the air filter cause this engine failure, or was it just its time? Thanks so much for watching and hit the thumbs up button and subscribe for more if you enjoyed. You all ROOOOOCK!!! 🤘🤘
I would say she was almost due for a rebuild but the ultra free flow 5000 no restriction airfilter didn't help either. Part number is 000000, don't recommend.
@@MichaelSabo nahh there's no way it caused the failure. I haven't finished the video yet but if there's no scores in the cylinder walls or on piston skirts or in the bearings then there's zero evidence that it was caused from no air filter. The ECU would correct fueling for the "extra" air coming in. I'll correct myself if there's evidence of debris entering the engine and causing damage b
this is your 4th video that i saw and I'm amazed to see someone just doing the videos so much for community and not just to make money, i do not own any bike atv or sxs but i really enjoy your videos at least this what i saw good work and good luck to future of your channel
THATS SO CRAZY U TWO KNOW EACH OTHER..,U2 R MY FAV TO WATCH ,, HOPE TO MEET U BOTH THIS SUMMER..ALso getting closer to finishing my restore '03 kx 250 m1
There is a better chance that it blew the head gasket because it was overheated at some time or multiple times. With factory tune they are a little lean in the middle and the radiator fan doesn’t kick in until 200 degrees. I would definitely consider upgrading head studs right away now that you have it apart.
Hey mike you just opened the bumper in the video and pointed out the rescue point. I'm suggesting getting a yankum kinetic rope for recoveries , lite weight , very strong to have when needed. Lots of sizes and colors to choose from . 👍✌️
I mostly enjoy the quad wars, and cheap quad challenge like Mike and sxs blog often do. But this is pretty cool too. I'm a dirt bike and quad guy, but the sxs scene is getting bigger every day.
Mike, it would be prudent to lock the cams so that when you remove the chain, they don't spin over due to valve spring tension. That prevents bent valves! That engine uses MLS head gasket which is not forgiving in any way. Machining the cylinder head and decking the block is recommended. Basically, the failure was a head gasket and TTY head bolts that allowed the head to lift during overrev. I appreciate people doing this with their Subarus on Vail pass since it brings revenue to our shop. Every one of them will have an ARP stud kit as opposed to TTY bolts, without fail.
Love the branching out man looks pretty cool for sure 😎 giving real mx vs atv vibes hahah man since youve been this far with power sports i think its about time you build a super mini aka the crf150rb i bet it would be sick if you're in charge of the project 💪🤘
Double shear rear knuckles started in 2022. I would do head studs and focus on the turbo and tuning if you want big power. I hope you get some good speakers. Stay with OEM axles and 32" tires. I hate how no common windshields roofs rear windows wipers etc. work with custom cages. Quads are so over, sxs life is where its at!
I did a lot of research on the X3 before pulling the trigger on my first pure sport SXS. The Rotax Ace 900 engines seem to be very well built. I would think they would have to be since some of those engines are classified to be used in ultralight aircraft chassis.
Professor Sabo i thank you as many do for your detailed works. We look forward to a great 2025 with you and your incredible sponsors of fine quality parts and services. You sir may enjoy as many Bul tacos as you can consume. 👍👍👍👍👍. Merry Christmas and hopes for a wonderful new year. 👍✌️
That’s bad ass that would be awesome to have with you out on a good long ride that would come in handy something like i’d like to hang out with you guys sometime and go riding and you can give me tips on how to make my banshee run a lot better. It runs OK but it could run better. I’ve learned a lot of stuff from watching your shows.
S3 are a parts house in Europe (Italy I think), they started out with specialty motorcycle parts and have been steadily expanding into other markets :-) Big in the trials world.
With the shim caps they need to be in the right order like you are doing. If they get mixed up valve clearances will get changed and you will have to re shim
@@MichaelSabo Yes you are correct no shims on a HYD bucket only need to worry about that if you decide to go to a solid bucket setup and I don't recommend it unless you plan on pulling the valve cover periodically to lash the valves. Good luck with your build. Currently in middle of a billet Whalen speed block build myself looking to make 500 WHP and brake shit😂
@@MichaelSabo yes 500 WHP IS correct with more still on the table to tap into. The guys over at Whalen speed are a amazing group of guys with a lot of knowledge on the Rotax and how to get the power to the wheels. Granted I'm pushing close to 20k in just the engine build but if you want to make power in a small displacement engine it takes money and a lot of it LOL
@MichaelSabo Sick a YFZ. Really hoping you make the jump and purchase a KTM 525 Quad. They are so sick and rare which means expensive. Would be cool to see since not many have them.
I vote that it was just its time to give. I'd guess the gasket was the failure point and when the metal expands, it lets antifreeze in. I say build the engine up some. It's already apart, you might as well do the internal upgrades now.
I would keep stock bore do some upgraded pistons and rods, arp head studs, maybe some cams, a bigger turbo, better intake manifold and a tune and you can easily make 300whp reliably. Even if you go all stock with just head studs, bigger injectors updated intake and a tune you can make around 250 whp reliably
Still trying to get used to seeing you in jeans and a hoody mike! Lol, when you film at home it’s always shorts and a Tee. And the classic Parts exploding in your trash can. Thanks for the video, I’m on the fence with a sxs right now. Let’s see if you can sell me on it.
Last year when I got it out, and I was driving down the road it kept wanting to hop really bad, but once I started giving it more fuel, it came out of it, but when I run really easy on it, it just wants to pop a lot. I think the rubber between the engine and the carburetor might be Ruttin.
Multiple times you kept smelling coolant. I think it just ran hot to many times. Cylinder pressure went up as temp went up. Just a good old blown head gasket. Definatly need to check the head a deck for warp.
I would have to say the no air filter didn’t help but I would think that the motor was running hot and with the great looking oil and filter the head gasket failed on cylinder 2
The engine is a great engine with stock parts. For more power you’ll probably need new fuel pump, turbo, intercooler, and some tuning. You need rock knockers, i believe that’s how you broke the stock wheel from a rock being thrown from the front tires into the back wheel.
It was a 154hp first generation x3 engine. No filter, detroyed your turbski, and blee it all to pieces. Probably crack some ring lands and skirts as well. You can make 32k miles if youre diligent
Slapped the same turbo right on the replacement engine and it pulls 89mph - I've got about 8 hard hours on it since. Not saying it didn't do damage, and I'm no pro, but I inspected the rings/ skirts, etc, and it looks pretty dang good.
That engine was fine. I'm thinking you got it to hot and then either blew the head gasket or warped the head. But at this point I think a new headgasket would have fix it.
I think the dirt blew the Turbo! Just like Cletus locked up the Mini TRX, I think maybe the head is warped, but the bottom end didn't show any signs of overheating?! 😮
Loved the video lil' bro! Couple questions.Do you have a discount code for PSN? Also I have been seeing requests for a Warrior build. If you are considering that please drop me a way to contact you, I have several that I would be willing to hook you up with. I live in tn. I can send pics of what I have and we can go from there. Bet you can't beat the price either lol Take care and keep dropping these bomb a$$ vids!
No air box makes it run leaner then hotter which will do the head gasket sucking in dirt isn't that bad unless it's abrasive.sand rock something like that 29:41
I think it was just it's time. the machine is designed to be run hard and whan you consider how many hours it's done it wear and tear head gaskets go and generally the first thing to go when driven hard. Engine gets extreme heat as you know metal moves when it's warm my guess is it got hot worped it literally not even a millimeter and the coolant found the weak spot of the gasket. BUT no filter could have contributed been forced through the turbo turning the inside of the engine into a literal sandblasted lol never the less great video and I think you really wanted to damage it to be able to fix it 😂😂😂
Damn, it's a real bummer that box didn't come with the Japanese screwdrivers. Like they really dropped the ball on that especially for the price. What a shame.
@MichaelSabo in my opinion including those is a no brainer. If it had those it would be well worth the price but without em I feel like you can get the same tools for less money since none of them are real specialty. Still cool tho and like you said perfect for the track just needed those damn screwdrivers.
The weight=quality thing is because of the Chinesium that has taken over. Chinesium is always lighter than the same thing made out of quality material.
I gotta know... did running without the air filter cause this engine failure, or was it just its time? Thanks so much for watching and hit the thumbs up button and subscribe for more if you enjoyed. You all ROOOOOCK!!! 🤘🤘
I would say she was almost due for a rebuild but the ultra free flow 5000 no restriction airfilter didn't help either. Part number is 000000, don't recommend.
@@yobro4423 lmao 🤣 I love it man
@@MichaelSabo nahh there's no way it caused the failure. I haven't finished the video yet but if there's no scores in the cylinder walls or on piston skirts or in the bearings then there's zero evidence that it was caused from no air filter. The ECU would correct fueling for the "extra" air coming in. I'll correct myself if there's evidence of debris entering the engine and causing damage b
Naw I'm sure it being the first year model they didn't use strong enough head bolts to hold in the boost
Your videos are top notch!
Mike sabo with the beard era in STRONG
Haha, thanks for the love man!
Was gonna say dudes growing out the beard hahaha
Facts looks really good on him some guys should never do beards but it fits are boy for sure
Stroker kit, some cams and head work 👀
this is your 4th video that i saw and I'm amazed to see someone just doing the videos so much for community and not just to make money, i do not own any bike atv or sxs but i really enjoy your videos at least this what i saw good work and good luck to future of your channel
22:26 damn table just singing that struggle 🤣🤣🤣 God I love your videos
Yes, the S3 is made from a company that races the tray at King Of The Hammers. Very good team.
Lmao! Likewise bro!
Absolutely loving this X3 content!!
Glad you're enjoying it! Thanks for watching 🤘
Beard looks good 👍🏻 almost has a Michael Mathers brother of Marshal Mathers look 🤔
The Marshal mathers that never went to epstein island or diddy parties of course
@@SaltyCracker402 why though?
Killing it as usual! You never disappoint with the upgrades! I’m just like you when it comes to putting bolts in the same spot. Much respect!
Looks like its going to be a beast of a build, very excited to see it finished and riding
Another awsome vid bud, keep em coming, much love from the UK bro
Thank you for the love!
I love how simple these motors are. Nothing to em’ I’ve rebuilt a few and they’re impressive how much HP they can make with again.. being so simple
Great job there bud, love the content. Always learn a lot from your videos. Keep it up bud thx.
Thank you for the love and for watching Roger 🤘
THATS SO CRAZY U TWO KNOW EACH OTHER..,U2 R MY FAV TO WATCH ,, HOPE TO MEET U BOTH THIS SUMMER..ALso getting closer to finishing my restore '03 kx 250 m1
There is a better chance that it blew the head gasket because it was overheated at some time or multiple times. With factory tune they are a little lean in the middle and the radiator fan doesn’t kick in until 200 degrees. I would definitely consider upgrading head studs right away now that you have it apart.
That's a good guess and thank you for the suggestion on the studs
This!
Love it, Cant wait till the build!!🤟
🤘🤘
Hey mike you just opened the bumper in the video and pointed out the rescue point. I'm suggesting getting a yankum kinetic rope for recoveries , lite weight , very strong to have when needed. Lots of sizes and colors to choose from . 👍✌️
Thank you for the suggestion man, that's a great idea!
about time you post
OH SHIT! its the middle cylinder, oh that's giggity. that made me lol real hard. love it mike keep it man!
Honestly I think we can all agree the quad content is where it’s at!!!
Nah this is dope too, cant all be the same thing
@@hwinterrtrue but he hasn’t done a quad build in a while
I mostly enjoy the quad wars, and cheap quad challenge like Mike and sxs blog often do. But this is pretty cool too. I'm a dirt bike and quad guy, but the sxs scene is getting bigger every day.
@@shanewilliams8768I’m also a quad guy and I agree the sxs community is getting WAYYY bigger
So is this a tool channel now?
Mike, it would be prudent to lock the cams so that when you remove the chain, they don't spin over due to valve spring tension. That prevents bent valves!
That engine uses MLS head gasket which is not forgiving in any way. Machining the cylinder head and decking the block is recommended. Basically, the failure was a head gasket and TTY head bolts that allowed the head to lift during overrev. I appreciate people doing this with their Subarus on Vail pass since it brings revenue to our shop. Every one of them will have an ARP stud kit as opposed to TTY bolts, without fail.
Looks like a fun engine to build. I love a good puzzle!
Fuck that, I'm out. I'm so glad I no longer wrench.
@AcidTechnoMan5000 👍
It's crazy what you can put them can ams threw, I think BRP makes the best side by sides an sleds hands down.
It's my first time inside a BRP engine - definitely seems to be engineered well.
Bro got a SxS and now he’s rocking a beard and everything 😭 great video like always!
Cool teardown!
Love the branching out man looks pretty cool for sure 😎 giving real mx vs atv vibes hahah man since youve been this far with power sports i think its about time you build a super mini aka the crf150rb i bet it would be sick if you're in charge of the project 💪🤘
Another great video!!!
Thank you Joel 🤘
I’m honestly super impressed over all but specially that rod #3 hasn’t bent
Double shear rear knuckles started in 2022. I would do head studs and focus on the turbo and tuning if you want big power.
I hope you get some good speakers. Stay with OEM axles and 32" tires.
I hate how no common windshields roofs rear windows wipers etc. work with custom cages.
Quads are so over, sxs life is where its at!
I did a lot of research on the X3 before pulling the trigger on my first pure sport SXS. The Rotax Ace 900 engines seem to be very well built. I would think they would have to be since some of those engines are classified to be used in ultralight aircraft chassis.
Whoa, I didn't know that. Seems like it engineered well.
the beard is IT man 👌🏼
Beauty tool kit! Pretty decent price too!
Professor Sabo i thank you as many do for your detailed works. We look forward to a great 2025 with you and your incredible sponsors of fine quality parts and services. You sir may enjoy as many Bul tacos as you can consume. 👍👍👍👍👍. Merry Christmas and hopes for a wonderful new year. 👍✌️
Man, this is awesome comment - made my night. Thank you and Merry Christmas to you as well 💪
My fav UA-camr
You're awesome; thank you
Those pod lights are sick.
That’s bad ass that would be awesome to have with you out on a good long ride that would come in handy
something like i’d like to hang out with you guys sometime and go riding and you can give me tips on how to make my banshee run a lot better. It runs OK but it could run better. I’ve learned a lot of stuff from watching your shows.
S3 are a parts house in Europe (Italy I think), they started out with specialty motorcycle parts and have been steadily expanding into other markets :-)
Big in the trials world.
Great video Mike.
I love Micheal sabo and dirty engines 😍🥰🥰
I love you too
Sus
🏳️🌈❔🤨
I’ve got a friend with 11000 miles on his 18 Rzr Turbo. Good maintenance goes a long long long way boys.
With the shim caps they need to be in the right order like you are doing. If they get mixed up valve clearances will get changed and you will have to re shim
If I'm not mistaken, this has hydraulic shim buckets that do not need to be shimmed.
@@MichaelSabo Yes you are correct no shims on a HYD bucket only need to worry about that if you decide to go to a solid bucket setup and I don't recommend it unless you plan on pulling the valve cover periodically to lash the valves. Good luck with your build. Currently in middle of a billet Whalen speed block build myself looking to make 500 WHP and brake shit😂
@sixmillionthemilitantstack6582 500 whp!? That's gonna be savage!
@@MichaelSabo yes 500 WHP IS correct with more still on the table to tap into. The guys over at Whalen speed are a amazing group of guys with a lot of knowledge on the Rotax and how to get the power to the wheels. Granted I'm pushing close to 20k in just the engine build but if you want to make power in a small displacement engine it takes money and a lot of it LOL
Liking the beard Mike 💪🏽
Thank you dude!
One of my riding buddies has a 21’ X3 with 18k miles on it, original engine and transmission
Man, that's awesome!
Man I knew big red was standing close by lmao
Those pod lights are really nice
No doubt dude, I can't wait to see how bright they are
Man we better get some qud content soon. And would like to see that KX250, curious what your plans are for it.
KX250 will be this year, not sure when any YFZ450R is in the first quarter of the year
@MichaelSabo Sick a YFZ. Really hoping you make the jump and purchase a KTM 525 Quad. They are so sick and rare which means expensive. Would be cool to see since not many have them.
I vote that it was just its time to give. I'd guess the gasket was the failure point and when the metal expands, it lets antifreeze in.
I say build the engine up some. It's already apart, you might as well do the internal upgrades now.
I would keep stock bore do some upgraded pistons and rods, arp head studs, maybe some cams, a bigger turbo, better intake manifold and a tune and you can easily make 300whp reliably. Even if you go all stock with just head studs, bigger injectors updated intake and a tune you can make around 250 whp reliably
do a rear winch setup it would be awesome!!
Still trying to get used to seeing you in jeans and a hoody mike! Lol, when you film at home it’s always shorts and a Tee. And the classic Parts exploding in your trash can. Thanks for the video, I’m on the fence with a sxs right now. Let’s see if you can sell me on it.
It's definitely a change getting used to this shop. The SXS stuff is cool, but I still love my bike and quads 🤘
UPGRADE IT! Simple things to do for added power and strength but keeping it simple for reliability sake.
Last year when I got it out, and I was driving down the road it kept wanting to hop really bad, but once I started giving it more fuel, it came out of it, but when I run really easy on it, it just wants to pop a lot. I think the rubber between the engine and the carburetor might be Ruttin.
Hey sabo what's that Badger sign behind you? Looks propper retro 👌👌👌
Multiple times you kept smelling coolant. I think it just ran hot to many times. Cylinder pressure went up as temp went up. Just a good old blown head gasket. Definatly need to check the head a deck for warp.
Good call. I will be decking and having the head serviced - it will all be recorded 🤘
I think you’ve gotta do some kinda engine build on er with a bigger turbo and a tune maybe get it to 300 horse comfortably🤔
It's tempting - I'm talking around to some people in the X3 world getting suggestions.
I would have to say the no air filter didn’t help but I would think that the motor was running hot and with the great looking oil and filter the head gasket failed on cylinder 2
Hey Mike . Great video …. Do you know if you can still buy those rear winch bumpers ?? Thanks
Bro you look better with the beard
Thank you man, I'm still testing it out.
Mo powa baby! Keep the beard for sure 😂
There's a second drain plug for the oil filter.. 😂
Bro what go nuts on the hp always
Black look great when it's clean...
The engine is a great engine with stock parts. For more power you’ll probably need new fuel pump, turbo, intercooler, and some tuning. You need rock knockers, i believe that’s how you broke the stock wheel from a rock being thrown from the front tires into the back wheel.
The noise you made when you pulled the oil filter out I made the same noise my oil never gets that dirty in any of my machines not even my truck.
It was a 154hp first generation x3 engine. No filter, detroyed your turbski, and blee it all to pieces. Probably crack some ring lands and skirts as well. You can make 32k miles if youre diligent
Slapped the same turbo right on the replacement engine and it pulls 89mph - I've got about 8 hard hours on it since. Not saying it didn't do damage, and I'm no pro, but I inspected the rings/ skirts, etc, and it looks pretty dang good.
when is the next video noooo i always loved it being done in 1 video
Go crazy with it Mich like as crazy as you are willing to go but why skimp out now?
It's tempting man... lol
Looking totally different with the beard!
I'm mixed on it lol
@@MichaelSabo keep it brother. Too baby faced without it. You look like a man now lmao!
Damn dude, I thought you were gonna put that hair net on
Bro... I had the minds to do it if my hat wasn't on 😂
@ gotcha, yea it looked like you were going for it lol
"Michael Sabo in a random PSN or partzilla shop dismembering the X3 with power tools dexter style" would have been a cool title
Lmao! 😂
That engine was fine. I'm thinking you got it to hot and then either blew the head gasket or warped the head. But at this point I think a new headgasket would have fix it.
I feel like running a turbo car with no filter that hard caused it to be lean and hot. Caused the gasket failure.
That's a very good point
is this michael sabo or what!! make the engine roar
Partzilla, motosport, rmatvmc, and jetsrus are life savers.
💯
When I do oil changes, I do the flood mode procedure to remove a lot more oil during the change.
I think the dirt blew the Turbo! Just like Cletus locked up the Mini TRX, I think maybe the head is warped, but the bottom end didn't show any signs of overheating?! 😮
Could be right - it definitely saw some heat
Bore it out and bigger turbo . A head port might be cool👍🤘
I ain’t gonna say nothin about you growin a beard after hangin wit big homie 😂
😂😂
first and big fan
Thanks for watching and for the kind words man!
Loved the video lil' bro! Couple questions.Do you have a discount code for PSN? Also I have been seeing requests for a Warrior build. If you are considering that please drop me a way to contact you, I have several that I would be willing to hook you up with. I live in tn. I can send pics of what I have and we can go from there. Bet you can't beat the price either lol Take care and keep dropping these bomb a$$ vids!
install the cage and see if you fit, I'm 6' and my Hemet hits the roof in a small cage
That's a good idea - It's a used cage though and the previous owner is taller than me and used full race gear - I should be good!
I almost didn’t click because I didn’t recognize you man 😂
Come on wit the build big dawg it’s all I want for Christmas 💀
No air box makes it run leaner then hotter which will do the head gasket sucking in dirt isn't that bad unless it's abrasive.sand rock something like that 29:41
Probably ran a bit lean since there was no air filter, hence made the engine build more heat.
Holy shit a bearded sabo throwing us a curveball huh bud haha
i dont see any signs of damage from dust like scoring on cylinder walls prolly over heated some point an got pushed to hard but still great vids
I think it was just it's time. the machine is designed to be run hard and whan you consider how many hours it's done it wear and tear head gaskets go and generally the first thing to go when driven hard. Engine gets extreme heat as you know metal moves when it's warm my guess is it got hot worped it literally not even a millimeter and the coolant found the weak spot of the gasket. BUT no filter could have contributed been forced through the turbo turning the inside of the engine into a literal sandblasted lol never the less great video and I think you really wanted to damage it to be able to fix it 😂😂😂
So the original engine has higher compression ratio than the one you put in. The one you put in normally has a slightly larger turbo paired to it
This is true, although I put the original turbo on the new engine - it definitely runs harder and pulls 3 more MPH top speed.
look up the trick with sticking two wrenches together for leverage
do you gonna paint the back bumper silver also?
I think so - bumpers, rock sliders, cage and a arms is the plan.
@@MichaelSabo ssssweeet
Nice job Mike. Good to see a UTV tear down. It’s really just a bigger quad. It will be fun seeing the suspension details get handled.
Keep the beard ❤
I can't tell if you're on a cut or its just the beard but good new look. Stay swole
I appreciate it man!
Full send on the spare engine… Big Bore!
Please do another quad wars
Throw in some high compression pistons and call her a day
Damn, it's a real bummer that box didn't come with the Japanese screwdrivers. Like they really dropped the ball on that especially for the price. What a shame.
That would be a BIG plus if they had even just one JIS and flat head
@MichaelSabo in my opinion including those is a no brainer. If it had those it would be well worth the price but without em I feel like you can get the same tools for less money since none of them are real specialty. Still cool tho and like you said perfect for the track just needed those damn screwdrivers.
The weight=quality thing is because of the Chinesium that has taken over. Chinesium is always lighter than the same thing made out of quality material.
Good point
Where is this new shop?
Your first triple or double? What about then banshee man 😂
Dude... I can't believe I didn't think of that lmao. First 4 stroke twin or triple haha
@@MichaelSabo lmao that makes sense when referring to four strokes, didn't think of that tbh