Hi mate i have had a number of boats from runabout to half cabs and opens ,if i want to set something up say a block to support a step/cover i used liquid nails to place the timber onto the ali ,i weigh around 86 kg and i had a step fixed with this for around 6 years and no problems just a thought if you want to attach anything to the sides or rear of your boat .
Mate get a blue line cutting board console it is a drink holder, tackle compartment , and a bait board that sits on the side of your boat and all the bait goes straight into the water
G'day, Matt, I know this is an old video, but how was this motor slow trolling? Do you remember? Did the motor handle it ok? Some 2 strokes don't like trolling is all. And yes, nice set up by the way.
Hey mate really great video, I would really like to have a boat like this one day to use in the bay and for the river would you be able to tell me how much you spent the boat. Also really creative storage ideas new sub here!!!
hey bryson i love to fish whats you best recommendation on putting a foor in do it the hole of the boat or just have a cast net my boat is a 4m shallow v with 10hp mec
The engine was approximately $1600 (AUD), and the boat around $1200 (AUD). I'm sure if you look around at the second hand market, you'll be able to find something in just about any price range!
Hey mat I have just seen this video and saw the tiller extension and I wa sjust wondering where u bought it from cause I have just recently bought a 12ft tinny with a 15ph on it and I use a piece of pipe as an extension, and ur from aus aren’t u??
Hey mate - Yep - Brisbane based. I bought it on ebay. I'm pretty sure it was under $30, and an Aussie seller. Mind you, if your pipe works just as well, then no need to spend the cash!
Matt Kelly Fishing, thank you for that I’m from nsw about 2 hours north of Sydney, and yea the pipe does work but it sometimes doesn’t get a grip and just slides around and the motor won’t go. But how long is the one u got
Definitely get one like mine then as it clamps right in - It's telescopic, I'm not 100% how long it is. If you look up 'Mr Boats Tiller Extension' in Ebay, I think that's the same one I got.
Thank you for your interest! You can find my socials in the description box below the video. Make sure to follow me for updates and behind-the-scenes content!
Source one at a cafe or supermarket. Just ask them and they've often got old ones around that haven't been sent back to a supplier. All the attachments are just bolted on. Easy to do when the crate is plastic!
Mine is a 4 Bow, 1.5-1.7m (wide). Lengths are pretty standard, the key measurement is width (to ensure it fits your boat). I'd imagine yours would take the same, or very similar to mine. I believe mine came from Boating1 on eBay. Do some searching though!
nice. how do those clamp seats work for you? they stay snug and dont loosen off? been keen on getting 1 or 2! cheers. check out my channel for some tinny fishing etc from new caledonia. cheers
Hahaha, sure is. Mate, you're killing me. Heaps of people telling me that! I've only ever picked up the odd bream/flatty!!! Even heard of cod and mangrove jack in the area, but never seen any.
hey bryson i love to fish whats you best recommendation on putting a foor in do it the hole of the boat or just have a cast net my boat is a 4m shallow v with 10hp mec
love the boat buddy gave me a few ideas
That's a really cool set-up, I can hear the excitement in your voice, such an easy hobby 2 get into all the best stay safe guys.
that bucket cutting board is awesome. never seen such a thing. getting one now.
Yeah I love it! All the best.
Where are they from
@@alien957
Big W or ebay
It looks like a nice day to go fishing
put a bulge pump in and depth sounder and maybe like proper nav lights and stern lights
Hi mate i have had a number of boats from runabout to half cabs and opens ,if i want to set something up say a block to support a step/cover i used liquid nails to place the timber onto the ali ,i weigh around 86 kg and i had a step fixed with this for around 6 years and no problems just a thought if you want to attach anything to the sides or rear of your boat .
Mate get a blue line cutting board console it is a drink holder, tackle compartment , and a bait board that sits on the side of your boat and all the bait goes straight into the water
I love your boat. Super cool!
Love this boat
G'day, Matt, I know this is an old video, but how was this motor slow trolling? Do you remember? Did the motor handle it ok? Some 2 strokes don't like trolling is all. And yes, nice set up by the way.
Nice boat
Cheers!
this is a beauty !
good set up!!
Cheers mate - Check out my more recent vids to see the new boats.
Are you in Cleveland raby bay?
nice mate
Cheers
Hey mate really great video, I would really like to have a boat like this one day to use in the bay and for the river would you be able to tell me how much you spent the boat. Also really creative storage ideas new sub here!!!
Where abouts did you get the Bimini cover? Awesome setup 👍🏻
Hey mate how much was the awning? And the brand of you know it.. also is it the sea jay angler? Thanks
hey bryson i love to fish whats you best recommendation on putting a foor in do it the hole of the boat or just have a cast net my boat is a 4m shallow v with 10hp mec
Straight from Vaucluse
where you source the rocket rod holders for the bimini from ?
how much did this boat cost alltogether (roughly )
Hi what was the make and model of your boat?
how much did u pay for it because I am looking for a boat and I want to know how much it would cost
The engine was approximately $1600 (AUD), and the boat around $1200 (AUD). I'm sure if you look around at the second hand market, you'll be able to find something in just about any price range!
Look on craigslist
You realise you live in the number 1 land based queenfish spot in Brisbane
Tell me more, I've lived in this area for 15 years, and have never heard of Queenfish around!
What is the beam width?
Hey mat I have just seen this video and saw the tiller extension and I wa sjust wondering where u bought it from cause I have just recently bought a 12ft tinny with a 15ph on it and I use a piece of pipe as an extension, and ur from aus aren’t u??
Hey mate - Yep - Brisbane based. I bought it on ebay. I'm pretty sure it was under $30, and an Aussie seller. Mind you, if your pipe works just as well, then no need to spend the cash!
Matt Kelly Fishing, thank you for that I’m from nsw about 2 hours north of Sydney, and yea the pipe does work but it sometimes doesn’t get a grip and just slides around and the motor won’t go. But how long is the one u got
Definitely get one like mine then as it clamps right in - It's telescopic, I'm not 100% how long it is. If you look up 'Mr Boats Tiller Extension' in Ebay, I think that's the same one I got.
Matt Kelly Fishing alright thank u so much, and love ur Chanel great videos u make
Pleasure - Thanks mate!
Are kids driving 6hp's allowed to drive at night?
As far as I know. I've had my boat license for 15 years, so can't be sure on current regulations.
If you were to sell your tinny how much would you sell for
Hey mate - I gave the tinny to my parents when I got the 12 foot fibreglass boat. That's the only one I'm looking to sell at the moment. Cheers.
Hey where can I get the same Nav light?
Pretty sure ebay is the best bet! These one is from a few years ago, so I'm not exactly sure where I got it.
Where can I find your socials?
Thank you for your interest! You can find my socials in the description box below the video. Make sure to follow me for updates and behind-the-scenes content!
how do u make the milk crate
Source one at a cafe or supermarket. Just ask them and they've often got old ones around that haven't been sent back to a supplier. All the attachments are just bolted on. Easy to do when the crate is plastic!
where did u get the sun shade from? what size tinny is that 14ft?
The Bimini was an ebay purchase. I believe it was around $150. Bargains to be had! The tinny is around 12 foot.
do u know which one u ordered? I have a 14ft and been wanting to get one for mines..just don't know what length and which one to get
Mine is a 4 Bow, 1.5-1.7m (wide). Lengths are pretty standard, the key measurement is width (to ensure it fits your boat). I'd imagine yours would take the same, or very similar to mine. I believe mine came from Boating1 on eBay. Do some searching though!
nice. how do those clamp seats work for you? they stay snug and dont loosen off? been keen on getting 1 or 2! cheers. check out my channel for some tinny fishing etc from new caledonia. cheers
Nice👌🏼👌🏼👌🏼
Cheers!
brooooooooo i have landbased there heaps this is raby bay !!! ahahhahai live in thornlands some good queenies and trevs thorugh there
Hahaha, sure is. Mate, you're killing me. Heaps of people telling me that! I've only ever picked up the odd bream/flatty!!! Even heard of cod and mangrove jack in the area, but never seen any.
ahahah crackup hit me up if you wanna go for a fish one day bro cheers for the sub by the way
Mate, keen!
please do another
Will do!
Matt Kelly Fishing yes thanks
Where are u
Queensland, Australia
Matt Kelly Fishing u should do another Logan river adventures
Add bouyency
Ok
Y do u talk so fast
MCBC CREW cocaine. It's s rich white people thing.
wtf... Or I just talk quickly?
Matt Kelly Fishing your alright mate probably think you have money cause you got a boat, they don't realize these cost a few hundred used..
Slow your voice down!!!!
hey bryson i love to fish whats you best recommendation on putting a foor in do it the hole of the boat or just have a cast net my boat is a 4m shallow v with 10hp mec