Omg can't believe how good this is, I was in two mind on if to put the video of when I went on it on this one but didn't have much time 😬. But you need to hear and see this on the road. Holy crap it pulls now 😂.
Yes bro Black Widow twins 😂. Thanks bro I need to adjust her a bit but I'm happy with what I did considering I'm no mechanic 🤣. Wish you could hear it in person bro 😂
Black Widow systems are always super good quality for the price, I currently have a 200 GP system on my ER6N, doesn't look as cool as that Benelli tho!
You need to straighten up that hanger bracket before my OCD has a fit! Also, I saw an. install video recently in which the guy said if you remove the terminals from the battery, touch the positive wire onto the negative battery terminal (keep the negative wire out the way so it doesn't short) then this resets the ECU. Then, when you start it up again it makes the ECU program the engine parameters based on the new exhaust, it basically remaps itself. I don't know how accurate this is, it is feasable, and for a few minutes work if turns out legit it should make your bike run better.
😂😂😂 I knew someone was going to say that. Don't worry I'm going to do that. I was stressing out seeing it to on playback. I just took her for a spin and made sure she was okay first bust some minor adjustments will be implemented 😂. That's interesting 🤔. Have you got the link to the video because I would definitely give it a go. I can tell she is definitely running smoother after this isntall but still cuts out when cold so I could try that.
@@SpikeyOfficial I wouldn't worry if it didn't work. If the bike is running ok as it is then it is obviously managing just fine. In no way does it indicate a fault with any of your sensors. Like I said, it was a feasible idea, I wasn't entirely confident that it would actually do anything though. It is likely a habit that the guy has in that video as it may have worked on something else and he just does it as a matter of course. You should make the valve clearances check your higheat priority at this point. You may find that helps it run better for sure. For a relatively cheap procedure, possibly even free if you have the right tools, it could save your engine and money in the long run.
You really should bro. I honestly didn't think something like that would make a difference to a 125 but it does 😂. I was laughing the whole time doing the next video 😂
Spikey haha I bet you was can’t wait to see the next video man. Think I might start shopping for an exhaust 😋. Do you have a 0-60 of it when it was stock ?
Good luck with the ears i sold my full black widow system far to loud even with the baffles in only had it installed 2 weeks and took it off again all though my exhaust was the 230mm can
Honestly it's not that loud at all 😂.not on the tnt anyway. Now an mt-07 akrapovic is loud and cost a cheeky £1k 😂. Baffles out sounds a little bit louder than the weed exhaust but it's more of a bass than anything else.
I know I'm 8 months behind with this video lol but. At 3:05 are you using the stock bolt/screws that were holding the stock exhaust on or did you replace them? I'm currently trying to fit a black widow exhaust myself but the entire thing holding the stock exhaust (the screw and bolts themselves) are buggered. Bent out of shape and i can't remove them entirely. Any suggestions how to get them out/replace?
I just placed the original screws back in to place. If you get in contact with black widow they should send you out replacement screws for free. Is that what you mean? Or have I misunderstood? Just so I know.
@@SpikeyOfficial the stock screws for me are bent out of shape. Luckily I've just been to a local shop and they've supplied some others. Just need to remove the stock one from the engine itself now haha
I would check the diameter of the one you are thinking of buying first but you can usually buy adapters for what it is you are using. But that all depends on the brand you are going for.
I would say louder in the sense that it has more bass but sounds more clearer if that makes sense. With the weed exhaust it was very tinny and yeah it did sound good but the black widow seems a lot smoother in tone if that makes sense 😂.
Spikey I get ya, I want an exhaust for mine but the straight through systems is horrifically loud 😂 so I want something a little more quite that still sounds good 😂
When you was reving bike it was putting out a bit of smoke mite exhaust bedding in watch the bit with new exhaust in you see what I mean when did last do oil and filter on her mite be due a change
@@ilveverythingdaft It's because it's a straight through now bro 👌. Nothing stopping that smoke from coming out. Only done an oil change 3 months ago with filter.
@@SpikeyOfficial The smoke was probably due to all the exhaust paste burning off that you smothered on the header pipe, the header pipe is sealed by the circular crush gasket that should have been supplied in the kit & the paste is only for the pipe joints
@@pgtips9236 😂 yeah that's a good point. Because I met one of my old friends and he said my exhaust smells like deep heat 😂😂. I was like it's probably the exhaust paste. So yeah exactly what you said 😂.
I do enjoy your videos unfortunately this pipe looks all wrong to me and sits at the wrong angle and should use stock frame connector rather than a shitty bracket. I would stick with standard tnt silencer and a decat pipe to get sound and release the power but look stock while losing a few kilos!
Omg can't believe how good this is, I was in two mind on if to put the video of when I went on it on this one but didn't have much time 😬. But you need to hear and see this on the road. Holy crap it pulls now 😂.
Can I cut the exhaust crush gasket down in size thanks
Same as mine, looks awesome man and good job on the install.
Can't lie, it sounds great for a 125 💜
Yes bro Black Widow twins 😂. Thanks bro I need to adjust her a bit but I'm happy with what I did considering I'm no mechanic 🤣.
Wish you could hear it in person bro 😂
@@SpikeyOfficial Always sound 10x better in person 😉
@@ReevyTCG 😂 yep always does. Need this meet up soon before lockdown again 😬
Sounds like a beast man! also good to see you making more videos bro, keep them coming
Thank you bro 👌😁
I had the black widow on mt09 an I loved it. They are amazing value for the money.
How did you get the casket in
Black Widow systems are always super good quality for the price, I currently have a 200 GP system on my ER6N, doesn't look as cool as that Benelli tho!
Yeah for what you pay the quality is really good and the sound it produces is just bloody lovely 😂
Yess! I thought the time would never come 😂
😂😂 grafted hard to get this up tonight. Only took 3 hours to edit 😅
@@SpikeyOfficial damn, 3 hours? I hope the UA-cam pay is good
@@alexonwheels4190 😂 well it pays enough for fuel 🤣. Hopefully next year I can rely on pay from youtube to do a bit more 😂
@@SpikeyOfficial wait till you get a drz400 or mt07 or whatever you end up getting then it won't even pay a fraction of the fuel😂
@@alexonwheels4190 Yeah that's true bro 😂😂.
So in theory i could keep the stock dual exit and just install the straight pipe without the adapter?
Yeah pretty much. you will have to hollow out the dual pipe though if that makes sense
It has a silencer?
That looks and sounds badass mate 👍👍
Thanks mate I'm really happy with it 😁
Great job bro that sounds awesome and ye powerwise seems to be flying! Looking forward to the next video catch you laters 👊😎👊
Yeah it definitely picks up speed quicker. And I'm really not just saying that 😂.
You need to straighten up that hanger bracket before my OCD has a fit! Also, I saw an. install video recently in which the guy said if you remove the terminals from the battery, touch the positive wire onto the negative battery terminal (keep the negative wire out the way so it doesn't short) then this resets the ECU. Then, when you start it up again it makes the ECU program the engine parameters based on the new exhaust, it basically remaps itself. I don't know how accurate this is, it is feasable, and for a few minutes work if turns out legit it should make your bike run better.
😂😂😂 I knew someone was going to say that. Don't worry I'm going to do that. I was stressing out seeing it to on playback. I just took her for a spin and made sure she was okay first bust some minor adjustments will be implemented 😂. That's interesting 🤔. Have you got the link to the video because I would definitely give it a go. I can tell she is definitely running smoother after this isntall but still cuts out when cold so I could try that.
@@SpikeyOfficial ua-cam.com/video/XgKAzCD4JGM/v-deo.html start at 10.12 for the ECU reset.🤙
@@1DY. I'm going to give that a go today and see how it goes.
@@1DY. It didn't work 😥. Maybe if I change the sensor? I need to sort my clearance out next too.
@@SpikeyOfficial I wouldn't worry if it didn't work. If the bike is running ok as it is then it is obviously managing just fine. In no way does it indicate a fault with any of your sensors. Like I said, it was a feasible idea, I wasn't entirely confident that it would actually do anything though. It is likely a habit that the guy has in that video as it may have worked on something else and he just does it as a matter of course. You should make the valve clearances check your higheat priority at this point. You may find that helps it run better for sure. For a relatively cheap procedure, possibly even free if you have the right tools, it could save your engine and money in the long run.
It sounds really loud with baffle in idk what it sounds like without but yeah it’s loud with baffle in 🔥
Sounds awesome mate 👌👌
Wish you could hear it in real life mate. I passed by a lad I used to work with on his bike today and it's the first thing he noticed 😂
That really does sound awesome I really wanna put something on my ktm 🤔
You really should bro. I honestly didn't think something like that would make a difference to a 125 but it does 😂. I was laughing the whole time doing the next video 😂
Spikey haha I bet you was can’t wait to see the next video man. Think I might start shopping for an exhaust 😋. Do you have a 0-60 of it when it was stock ?
@@mrrevs2926 The closest I have to a 0-60 was when I was racing blake. So I may have to look at that again 😂.
Spikey yeah I’d have a look at that then mate it might give you a good idea on how much this exhaust has changed the power👌
Sounds great mate! I'm planning on getting the full system for my z650. When I've got the money lol
I bet that will sound amazing 😍
I have the 200mm Black Widow GP system on my ER6N, absolutely unreal sound, completely changed the bike in my eyes
@@SpikeyOfficial finally got it 😁 200mm full system. When it finally stops raining I might be able to fit it lol.
@@101steel4 😂 yeah this bloody rain is making it a pain to get the bike sorted. Hoping this summer will be amazing.
@@SpikeyOfficial the plan was to wait until summer to fit it. But now I have it I'm like a kid at Christmas lol
What top speed are you getting mate as I have black widow pipe with standard muffler
sounding good buddy !!
Thanks mate 😁
Sounds really good just leave the baffle out it sounds better now you're ready for the TT....😆😆 ride safe bro and enjoy
TT here I come 😂😂
So the header will match up with the standard twin exaughst
Good luck with the ears i sold my full black widow system far to loud even with the baffles in only had it installed 2 weeks and took it off again all though my exhaust was the 230mm can
Honestly it's not that loud at all 😂.not on the tnt anyway. Now an mt-07 akrapovic is loud and cost a cheeky £1k 😂. Baffles out sounds a little bit louder than the weed exhaust but it's more of a bass than anything else.
Did use the original manifold gasket that goes into the head? Or did you take it out?
What brand of paste did you use pal
What size end can is this im looking into getting a tnt and probably gonna buy this exhaust
I can't remember it but I'm sure there is a link in my description for it 👌
@@SpikeyOfficial ah ok 🤣 cheers
Does the 125 adapter come in the exhaust kit ?
No that's separate.
Good piece of kit
Really happy it with it 😁
I know I'm 8 months behind with this video lol but.
At 3:05 are you using the stock bolt/screws that were holding the stock exhaust on or did you replace them?
I'm currently trying to fit a black widow exhaust myself but the entire thing holding the stock exhaust (the screw and bolts themselves) are buggered. Bent out of shape and i can't remove them entirely. Any suggestions how to get them out/replace?
I just placed the original screws back in to place. If you get in contact with black widow they should send you out replacement screws for free.
Is that what you mean? Or have I misunderstood? Just so I know.
@@SpikeyOfficial the stock screws for me are bent out of shape. Luckily I've just been to a local shop and they've supplied some others. Just need to remove the stock one from the engine itself now haha
Hey fam I have the tnt 135. How much extra power did you get in horsepower and did you get faster speeds?
the exhaust mufflers, can they be universal for motorcycles? say like I buy one very good brand, can I transfer into a different bike?
I would check the diameter of the one you are thinking of buying first but you can usually buy adapters for what it is you are using. But that all depends on the brand you are going for.
Where can I order this from I been looking everywhere please help meeeeeee!!!!
Got a black widow exhaust on me van van there awesome
I bet that sounds beastly 😂
Next episode tonight?👍🏼👍🏼👍🏼
I wish editing was that easy 😥😂
Yes it improved performance a lot, and the sound is awesome, but it is just too loud😬 I have the standard silencer.
Has it made it louder than the werx pipe at all or is it quieter?
I would say louder in the sense that it has more bass but sounds more clearer if that makes sense. With the weed exhaust it was very tinny and yeah it did sound good but the black widow seems a lot smoother in tone if that makes sense 😂.
Spikey I get ya, I want an exhaust for mine but the straight through systems is horrifically loud 😂 so I want something a little more quite that still sounds good 😂
@@James_98 Yeah it's not too loud to the point where it's annoying unless I'm going death 😂😂.
Spikey coolio cheers mate 😂👌
Woops nearly missed this one, the red frame on the thumbnail sorta makes it look like it's been watched. 😜
😂😂😂 going to have to change it to white. That is a good point though I honestly didn't think of that until you said 😂.
@@SpikeyOfficial and you said you were a real You Tuber, my arse 🤣
#spikeyjesus
Or should I say #spikeymechanicjesus ?
That thing sounds beastly man. Nice one
😂😂 magic hands #spikeyjesus
Thanks bro really happy with it 😁
Spikey no worries man
How much
Check the link in the description 👌
It sounds like a fart can on a small cc bike. Just like what it looks like. You may as well have kept the dual and cat delete.
your union jack is upside down btw
fits perfectly with the state that this country is in, in distress haha
What you doing spikey you are meant to be saving for a mt-07 😆😂
Well mt-07 or xsr 700 who knows 👀😂
Whats the benefit of a new exhaust?
Quality note at the end,,,them o2's need to be kept real clean,,the eyes and ears of your rocket,,,
❤❤❤🇮🇹❤❤❤
🤩🤩🤩🇮🇹🤩🤩🤩
To much for me in and out blowing a bit of smoke out mate
What do you mean bro? 🤔😂
When you was reving bike it was putting out a bit of smoke mite exhaust bedding in watch the bit with new exhaust in you see what I mean when did last do oil and filter on her mite be due a change
@@ilveverythingdaft It's because it's a straight through now bro 👌. Nothing stopping that smoke from coming out. Only done an oil change 3 months ago with filter.
@@SpikeyOfficial The smoke was probably due to all the exhaust paste burning off that you smothered on the header pipe, the header pipe is sealed by the circular crush gasket that should have been supplied in the kit & the paste is only for the pipe joints
@@pgtips9236 😂 yeah that's a good point. Because I met one of my old friends and he said my exhaust smells like deep heat 😂😂. I was like it's probably the exhaust paste. So yeah exactly what you said 😂.
Second, sick bike
Thank you bro 😁😁
I do enjoy your videos unfortunately this pipe looks all wrong to me and sits at the wrong angle and should use stock frame connector rather than a shitty bracket. I would stick with standard tnt silencer and a decat pipe to get sound and release the power but look stock while losing a few kilos!
Pluimje
First
Winner winne chicken dinner 😂
Spikey lol