Great install vids bro. Im in the process of doing this also to my ek. Where did you get the connector to plug in the dryer? Couldn't find that connector in my harness.
Dope content. Question what belt did you use? Mind sharing the part number and prior to putting AC. Assuming you had no PS/AC. What belt did you use ? Trying to figure out what belt I need to get atm. I’m running no AC/PS, but soon I’ll be getting that AC kit to run AC.
I’m really having trouble finding a replacement for the bottom line on the firewall… The “Factory line” Is no where to be found at any junkyard near me. If you know of a replacement part number/s for the whole assembly from the bottom line on the firewall to the drier with that little Swoop at the end I would appreciate it a Ton if you’d reply
What mounts are you using? My hasport ekk4 mounts doesn’t allow the ac to clear my innovative traction bar. Wondering if it’s the difference in height of k20 over k24. Or engine placement. Thanks in advance
@@PunsGarage fan and compressor clutch kits in but they are permanently running, idle ad while running if ac is on, the clutch kick in and the fan start running even if the car is off and the key is on the start position (car still off) .... I have a 96 tho
@@PunsGarage I appreciate the information one last thing do you think for the swap put in and the AC is it still easy to work around the car I know it's not going to be as big of a engine bay like an Integra but is it still manageable or is it really tight to get things done? Appreciate all the information
Hybrid racing has a radiator or u can use a 92-00 radiator here's the link for the hybrid racing 👇 www.hybrid-racing.com/products/hybrid-racing-k-swap-halfsize-radiator-96-00-civic-del-sol-hyb-rad-01-06?variant=48942204612
*Detailed install. I like the fact that you don't hide and do stuff behind the scene like other UA-camrs* 👍
Thanks man really appreciate that 🙏
Super detailed video bro! I'm def watching this again when I install my hybrid kit. Keep up the great content 💪💪
Thanks, bro really appreciate it 🙏💪
Gorgeous build bro
Wonderful vid bro, amazing job! And thank you so much Jeffery, your job is worth gold too man 😉
Nice job bro.
@@lansperformance thank you
Can you still keep power steering or do you still have power steering
Great install vids bro. Im in the process of doing this also to my ek. Where did you get the connector to plug in the dryer? Couldn't find that connector in my harness.
It was part of my head light harness u can find it on ebay send me a message on Instagram I will send u a pic of how it looks
Awesome info thanks for the great content
can't wait to see drive it
Good stuff bro um in the process of collecting everything to k swap my hatch as well 💪🏼💪🏼
That's cool man if u need any help feel free to reach out 💪🙏
@@PunsGarage thanks will do
Where did you get the red washers that I see on all of your hardware? Like the ones on the strut bolts? They make it look really clean
I got them from down star check them out they got all the hardware
Just did this to the hatch also but.... You could have tucked the one line that is currently running along shock tower for a cleaner look.
Great vlog though
Dope content. Question what belt did you use? Mind sharing the part number and prior to putting AC. Assuming you had no PS/AC. What belt did you use ?
Trying to figure out what belt I need to get atm. I’m running no AC/PS, but soon I’ll be getting that AC kit to run AC.
I used a K-tuned ep3 pulley here is the link for the belt 👇 k-tuned.3dcartstores.com/K-Tuned-Belt_p_251.html
@@PunsGarage you a life saver! I appreciate the response. Thank you
@@alexm5095 anything time bro I got u 🙏🙏
On this do you need to go to the hondata to turn on the ac or the pressure switch runs the compressor
Such a clean bay mate. Very nice. What headlights are you using mate?
Black Housing head lights from eBay
@@PunsGarage thanks, Cheers!
Keep it up bro!💪🏾
🙏💪
I’m really having trouble finding a replacement for the bottom line on the firewall… The “Factory line” Is no where to be found at any junkyard near me. If you know of a replacement part number/s for the whole assembly from the bottom line on the firewall to the drier with that little Swoop at the end I would appreciate it a Ton if you’d reply
I’ve found the line for the bottom on the firewall…. It’s just everything from the fitting by the headlight to the drier I cannot find
@@willbewleyy ebay u will.find it
@@PunsGarage i’ve been looking….. just not really sure on sizes or what’s got the correct bend since I have no original part to go off of
@@willbewleyy www.ebay.com/itm/285955864358?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hURELNjBQvm&sssrc=4429486&ssuid=B9kf3RJfTvK&var=&widget_ver=artemis&media=COPY
What mounts are you using? My hasport ekk4 mounts doesn’t allow the ac to clear my innovative traction bar. Wondering if it’s the difference in height of k20 over k24. Or engine placement. Thanks in advance
Am using the ekk2 mounts with hub city rear mount i believe k24 is taller
Hey, did your ac compre and fan work as hard wire, mine pretty much function as it is hard wire running all the time, not idle correctly
No everything was working perfectly
Did u extend the fan wires like rad fan goes to the passenger side and condenser fan to the driver side
@@PunsGarage fan and compressor clutch kits in but they are permanently running, idle ad while running if ac is on, the clutch kick in and the fan start running even if the car is off and the key is on the start position (car still off) .... I have a 96 tho
Did hybrid racing provided all that or just the lines ?
Just the lines
Are those the kseries ac lines coming from the fire wall or are they the oem hatchback lines
Hey bud one line is original civic and the other one is from the hybrid racing kit
Hey man, what condenser did you used?
I've been looking around and Haven't come across any hyb kit with a condenser
Hey bud I used a 99 civic condenser I got it off ebay let me see if I can find the link
@@PunsGarage sounds good, thank you.
www.ebay.com/itm/304882747586?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=idmrzakirae&sssrc=4429486&ssuid=B9kf3RJfTvK&var=&widget_ver=artemis&media=COPY
@@PunsGarage awesome, thanks man! Big time help
@kevinpenate8961 glad I can help my g 🙏 🙌 if you need anything feel free to reach out 💪
What condesor you used
@@LeeChong-o4s 96-00 stock one for a civic like 40 bucks on Amazon
So now that you have the AC and power steering running do you need to modify the hood or does it close with a Stock hood?
I don't power steering just ac and no need to modify hood
@@PunsGarage oh nice but as far as power steering goes you can't have both or it's just too tight to fit
@@R26Roman you can just run the lines it fits perfectly I believe they sell a kit for power steering
@@PunsGarage I appreciate the information one last thing do you think for the swap put in and the AC is it still easy to work around the car I know it's not going to be as big of a engine bay like an Integra but is it still manageable or is it really tight to get things done? Appreciate all the information
@@R26Roman yea lines are nicely tucked to the chassis. So you still have room if you look at my ig you can see a pic of the engine bay
Did you have to make any changes on your ecu ?
No
Great video
Thanks!
what engine harness are you running?
Stock 02 rsx type s engine harness
@@PunsGarage thanks bro
Hey bro were you get the ac condenser and dryer from
Amazon
Can you tell me what serpentine you use I can’t find
I used the belt of a 02-05 civic si ep3
@@PunsGarage Thanks
@3030rey no problem 👌🙌🙏
It’s a 7pk1655 that the only that I find
Brother I do everything like you do and the compressor clutch doesn’t engage, it’s anyway that I can comunícate with you
Where did u order the condenser
EBay 96-00 ac condenser
🔥🔥
🙏🙏
where do you get all this stuff
Amazon for the ac condenser and dryer and hybrid racing for the ac kit
Bro how does it idle
Perfect u can adjust it if needed
Mines works but my engine overheats when running I've head that unhave to go to the kpro and edit the vtp to bump the idle up but unsure
Dude I'm going crazy new condenser,dryer, still overheating I think I need to bump up the idle but I have kprov1
@@ChristianGomez-b6d what fan u running and are u using water wetter
Are you running the stock subframe or the eg
Eg subframe
@@PunsGarage building a 98 hatch with my son but here in the south we definitely need the AC. Nice video, good detail on parts
yea it's very hot in the south glad I was able to help 🙏🙏
What kswap radiator can I use if I run this kit
Hybrid racing has a radiator or u can use a 92-00 radiator
here's the link for the hybrid racing 👇
www.hybrid-racing.com/products/hybrid-racing-k-swap-halfsize-radiator-96-00-civic-del-sol-hyb-rad-01-06?variant=48942204612
@@PunsGarage I appreciate response bro! Subscribed 👌
Think this work on a k swapped em2? If we use the 2000 civic ac stuff?
Yes
@@PunsGarage alr thank you bro appreciate soo much
yo bro , where did you get the condenser? is it a 96-00 condenser?
Yes 96-00 civic condenser
@@PunsGaragewhere did you get the condenser and dryer?
@@tobyknows3021 ebay and the dryer auto zone
Does your condenser fan turns on when you turn on your ac?
Yes
Y is it u ave to run a relay what abt the factory relays
The factory relay is the a (A) plug a17 It's not being used more so u have to give it power and Signal
@@PunsGarage so i will be use factory 1s
@@pedritojackson2829 yes
🔫🔫🔫🔥🔥🔥
🙏🙏
🔥🔥