Remove the top half of the priming grip to make it look smaller and more streamline, remove that silly bit underneath the muzzle, shorten that awful muzzle buy two thirds, slap on a paintjob and that would look a million times better.
So my wife bought me one for Christmas and within a week I noticed there wasn't alot in the top half so I popped it open. I've removed the internal mag and am intending to integrate a side loaded flywheel blaster. And use the mega as a masterkey. I also want to remove the stock and add an attachment point or integrate the dart holder into a different stock to serve as a battery housing.
@@bobjanetmart2486 as soon as its finished I hit a hiccup since I'm using an evader as the main gun I have to do a little cheating to get the full auto kit in it. I was actually going to submit it to fan builds on Xavier's channel when I finish it, I'm also going to have a friend airbrush it to make it look a little more apocalyptic
I still want to convert one into a 4x4 Rival shotgun but it sounds even trickier with that Longshot-style breech. I wish I had spare Apollos or Atlases so I could attempt to transplant the barrel/air restrictor from one of those. Four blasts of four HIRs would make the TS even more game accurate and would be more unique than the slightly improved Magnus that it currently is.
Though with the way, it currently is the Fortnite tactical shotgun with a redesigned grip would make an amazing under barrel attachment. Especially for striferifle build.
I think the Twinshock is strictly better because its a functional shotgun rather than just in form, and it has higher on board capacity. And the Cycloneshock has higher ready-to-fire capacity. Rotofury is higher capacity too. But for an upgraded Magnus rifle, this is kind of cool
Notice how on the box, the pump is bolted to the rest of the blaster. Edit: NOTICE HOW IT REALLY IS BOLTED TO IT. Edit 2: I accidentally said ‘ot’ instead of ‘it.’
Hey Walcom, how about the fuzzy walrus modifies the TS by adding in a stryfe to fire over top of the shotgun barrel. That would make it like an M41A pulse rifle.
The thing about the tac, its a black pump shotgun if you look closely, but with oversized modifications attached onto it, The grip in game doesn't even move, yet its a modified pumped shotgun.
I really enjoy this blaster, I didn't enjoy the pump grip because my hands like to slide off. What I did is add a piccatini rail with double sided 3m outdoor mounting tape and I screwed it50th in with 2 screws that are just short enough not to mess with the pump. Then I added a worker angled 4 grip. Now it's a dream to use.
Super pumped about the only fortnite blaster I would pay money for. Tons of dead space maybe enough for a monorail style feeding mech?? I may be way out of line but just sayin’ there’s allot of dead space. Keep up the good work man.
"Everyone on this planet has played Fortnite" *Laughs in never playing any battle royale game and never having a single speck of interest in the genre*
I compared the plunger tube in my TS to the Magnus and it is about the same size, can't say for sure though, definitely won't take k26, it will take a tek 6 spring stretched out to fit inside it, or like a 12kg retaliator spring, the seal on the plunger head is horrible, I had to put like 10 wraps of Teflon tape on it for it to get a decent seal
Know what? You sold me on this! I miss my magnus, since i dismantled it to make a masterkey... Id probably cut off the top half of the pump grip. And i would DEFINITELY sand down the dabbing guy and the fortnite logo. Thinking about it, if probably just repaint a lot of it. Maybe add some lights inside it, tied to the trigger pull. But looking at its guts, theres a lot of good to be done to that!
you know what would be cool? if nerf made a Charged shotgun, a shotgun that you charge by holding back the pump handle and shooting by letting go, i thought this could be a cool idea for nerf, it would problably shoot Elite or mega darts but if its ever made im hoping for rival darts to give it the extra STING
Idk, but, is this the first internal magazine DART blaster to have slam fire, I know the Rival Artemis has it, but it shoots balls not darts (Edit-> The Rukkus is a indexing clip, and the strongarm is a revolver style, so, I don't think that counts as an internal magazine, I think blasters with a low capacity like this don't really need slam fire, now clip system blasters like the delta trooper can have small 6 round magazines, or huge 50 round drums from the Titan, plus, slam fire makes you want to blow through a magazine, internal, or external pretty fast
There's gotta be a way to strip off that cover and pump. Put on a grooved or strapped handguard like a real steel shotgun, or even a vfg with a 3d printed piece to hook into that lower slot.
I think if we can get a sealed breech short dart kit for this and a new pump grip it'll be a nice alternative to the pump-action long shot but I don't know just how well this thing will work with that. I haven't seen much done with the magnus and this is more of the same.
@@WalcomS7 true. I'm thinking along the lines on just something to hook onto where the pump section connects. Scrap the top. Keep the internal mag the same (not my wheelhouse) and then just mossberg strap or vfg the thing for a reliable pump action.
My Bossmerg makes super-loud "clicking" noise until it finally arrives at the last catch,- the "ratcheting mechanism" you mentioned in the nice vid! :) Could you tell, if it is possible, to remove that ratcheting noises (except the last click when it really gets primed)? Do you know which part of it is responsible for the ratcheting, and if removing or modding that away, alters the Blaster in a bad way? Thanks! :)
I have good idea for a nerf rifle and if every thing works out it could potently be EXTREMELY GOOD. Basically it will use a crank to prime, but it would load like a Martini-Henry. I also like the Nerf FN TS I think it was innovative in some way and give it some time it could basically be the next longshot with modding. I also have an extra idea for this rifle after it's creation, but I plan to see if it could use shells and be like a shotgun, but if I did that then i might need some shells like the buzzbee shells. So what is your option on my Blaster I want to make from scratch?
Seeing the weathered details on this blaster makes me want to get one for post apocalyptic larp reasons. The grip could be minimized and the tip of the blaster can be replaced or repainted
Imma be honest here, as much as I’ve seen people use this blaster with ease, I seem to have one MAJOR problem with it (at least with mine). I have had several mega darts get mangled in this thing when trying to pump it. It gets caught and jams the blaster, to which then I have to get the ol’ pin, press the tiny button and clear the jam. Maybe there’s a reason why but, idk I’m not much of an expert on it. If anyone can let me now why this blaster jams whenever I try to pump it, that’d be nice to know.
I haven't had the chance to hold one of these, but...can you wrap your thumb around the front of the pump grip? Might mitigate some of the annoyance of it being sloped in the wrong direction.
the only thing that drives me insane about the design of this, is it looks like a spas 12 with the stock folded onto the top. but the stock is already out. other than that mindfuck its great, they finally got a shotgun that loads pretty similar to a how you expect a shotgun to.... even if it's only single shot....
This is the best fortnite nerf blaster. Ignore how it performs this looks like the tac shotgun. From the shell to how you reload it's just like the tac shotgun. I love this blaster
While I despise epic and tim sweeney - this is definitely on my list. I look at this blaster and all I can see are options for a Borderlands mod and repaint.
It kinda surprised me how they didn't go for Halo or Destiny even Borderlands for a series videogame blasters as they would have so many options its unreal but the Fortnite blasters are cool
So an update this thing is annoying to work with, I've had to cut part of the sides out to slot in the parts of the evader I'm using, aside from a bit of cosmetic issues it's going together just fine. But it definitely looks like a bandit made piece of crap right now.
@@Wolfy-en6dv I really hope you're not trying to insinuate that Fortnite is a better game than Borderlands. Fortnite is just another craze that will be dead by next year. Borderlands 2 is 7 years old and still has millions of players. People will be playing Borderlands 3 until 2030!
Absolutely awesome blaster, excited to see what people do with it.... stream in about 45 minutes~!
Remove the top half of the priming grip to make it look smaller and more streamline, remove that silly bit underneath the muzzle, shorten that awful muzzle buy two thirds, slap on a paintjob and that would look a million times better.
Everyone is still sweaty and has like 3 shotguns and building technique
So my wife bought me one for Christmas and within a week I noticed there wasn't alot in the top half so I popped it open. I've removed the internal mag and am intending to integrate a side loaded flywheel blaster. And use the mega as a masterkey. I also want to remove the stock and add an attachment point or integrate the dart holder into a different stock to serve as a battery housing.
@@ralcogaming7674 that’s awesome can you post a video showing it
@@bobjanetmart2486 as soon as its finished I hit a hiccup since I'm using an evader as the main gun I have to do a little cheating to get the full auto kit in it. I was actually going to submit it to fan builds on Xavier's channel when I finish it, I'm also going to have a friend airbrush it to make it look a little more apocalyptic
"3rd person with some kind of advanced mobility mechanic" im sure you've heard of it, but have you tried Warframe?
First thing that came to mind here, too. I have 2k+ hours in the game, lol.
Ahh
A man of culture
Every time you upload a fortnite nerf gun video my recommend gets swarmed with Ryan toy review type channels
I keep getting recommendations for some "ADHD's World" guy. It’s very annoying.
Yeah, but that doesn’t seem to work no matter how much I do it so I’ve completely stopped looking at recommended videos on nerf channels.
You mean the kid on fuckin cereal boxes
I guess walcom completely forgot about the overwatch blasters that he even did a review on...
Looks like it could be some fun. Especially if properly modded. Great vid!
Why do I see you everywhere
Because I am everywhere.
@@homelee665 that's UA-cam for you
Actually looks surprisingly comfortable to shoulder. If it was a little less expensive, I’d be all over it.
The in game shotty grip doesn’t even move, so the grip was never designed to move :P
Actually if you look at the Ig model it does pump after every shot
It looks like one of those Serbu Shorty shotguns with a weird autopump system.
Edit: more like a Mossberg 500
@@A-G-F- if u look on the side, it says bossmerg 500
The ultimate question... Can it take a K26?
Tell that to Captain Xavier...
I still want to convert one into a 4x4 Rival shotgun but it sounds even trickier with that Longshot-style breech. I wish I had spare Apollos or Atlases so I could attempt to transplant the barrel/air restrictor from one of those. Four blasts of four HIRs would make the TS even more game accurate and would be more unique than the slightly improved Magnus that it currently is.
Though with the way, it currently is the Fortnite tactical shotgun with a redesigned grip would make an amazing under barrel attachment. Especially for striferifle build.
I realy hope They will do somthing like this but for a «sleagefire» like blaster
Thanks so much for getting this out! I think it has a ton of potential. Probably even k26 potential?!? 🤔
The spring in it is already very beefy, I'm not sure if k26 will have much of a positive effect
Waiting for Captain Xaviers can it take a k26 video
I think the Twinshock is strictly better because its a functional shotgun rather than just in form, and it has higher on board capacity. And the Cycloneshock has higher ready-to-fire capacity. Rotofury is higher capacity too. But for an upgraded Magnus rifle, this is kind of cool
Seems neat, I haven't really dived into internal clips though but it is good seeing another Mega pup action option.
Maniac4Bricks magazines
This is the best mega blaster
Maybe a cut-down Prophecy spring could work in this blaster...
Since it's Retaliator-sized, but much longer!
I much prefer the Twinshock for its practicality but I could see this being decent.
We need a ln elite version so it holds 8 darts at most
Sounds like in some ways the TS is a new longshot? Or an off shoot of it, don't know. WalcomS7 The Kamen Gundam with Jankblades of fury.
It’s funny how you were talking about the long shot because a while back I combined a magnus,Longshot,and centurion mag
my favourite shotgun
Notice how on the box, the pump is bolted to the rest of the blaster.
Edit: NOTICE HOW IT REALLY IS BOLTED TO IT.
Edit 2: I accidentally said ‘ot’ instead of ‘it.’
This blaster is actually amazing coming from nerf
👍🏻Thank you sir, super pumped about the only fortnite blaster I would pay
Hey Walcom, how about the fuzzy walrus modifies the TS by adding in a stryfe to fire over top of the shotgun barrel. That would make it like an M41A pulse rifle.
The thing about the tac, its a black pump shotgun if you look closely, but with oversized modifications attached onto it, The grip in game doesn't even move, yet its a modified pumped shotgun.
The pump does move in game, if you never noticed
They also did overwatch
Brain no work. Can't wait for 4000 comments about how they did that even though I've done multiple videos reviewing them...
The green thing is an ammo counter, obviously not functional on the blaster but that's what it's supposed to be that in the game
3-d printed speed loaders?😁
In regards to the pump grip, is it not possible to just cut the stock one in half so it doesn't wrap round the blaster like it normally does?
The sp-l is also just a magnus resking with the 3 Integrated magazine
I really enjoy this blaster, I didn't enjoy the pump grip because my hands like to slide off. What I did is add a piccatini rail with double sided 3m outdoor mounting tape and I screwed it50th in with 2 screws that are just short enough not to mess with the pump. Then I added a worker angled 4 grip. Now it's a dream to use.
Super pumped about the only fortnite blaster I would pay money for. Tons of dead space maybe enough for a monorail style feeding mech?? I may be way out of line but just sayin’ there’s allot of dead space. Keep up the good work man.
"Everyone on this planet has played Fortnite"
*Laughs in never playing any battle royale game and never having a single speck of interest in the genre*
ComradeSch do you want a medal
More laugh in tf2 and csgo
The ‘gigantic’ roughcut is called the Twinshock, it says in the picture
No shit.
I compared the plunger tube in my TS to the Magnus and it is about the same size, can't say for sure though, definitely won't take k26, it will take a tek 6 spring stretched out to fit inside it, or like a 12kg retaliator spring, the seal on the plunger head is horrible, I had to put like 10 wraps of Teflon tape on it for it to get a decent seal
Know what? You sold me on this!
I miss my magnus, since i dismantled it to make a masterkey...
Id probably cut off the top half of the pump grip. And i would DEFINITELY sand down the dabbing guy and the fortnite logo. Thinking about it, if probably just repaint a lot of it.
Maybe add some lights inside it, tied to the trigger pull.
But looking at its guts, theres a lot of good to be done to that!
Absolutely scrumptious
you know what would be cool? if nerf made a Charged shotgun, a shotgun that you charge by holding back the pump handle and shooting by letting go, i thought this could be a cool idea for nerf, it would problably shoot Elite or mega darts but if its ever made im hoping for rival darts to give it the extra STING
this is already on the clearance racks at my local walmart
For how much? They're still $40 at mine.
@@Skidracer21 30$
@@LambdaDuck that's a steal
would love to see it take mags. Shouldn't be too difficult
WS7
Awesome review. Thanks for bringing us the facts and your opinion. Another great review keep em coming.
Idk, but, is this the first internal magazine DART blaster to have slam fire, I know the Rival Artemis has it, but it shoots balls not darts (Edit-> The Rukkus is a indexing clip, and the strongarm is a revolver style, so, I don't think that counts as an internal magazine, I think blasters with a low capacity like this don't really need slam fire, now clip system blasters like the delta trooper can have small 6 round magazines, or huge 50 round drums from the Titan, plus, slam fire makes you want to blow through a magazine, internal, or external pretty fast
I got one of these when it came out, it's pretty good, though the darts catch often
3:16 Thanks, now I know the first thing I'm sanding off if I get one of these
What's wrong with dabbing?
There's gotta be a way to strip off that cover and pump. Put on a grooved or strapped handguard like a real steel shotgun, or even a vfg with a 3d printed piece to hook into that lower slot.
I think if we can get a sealed breech short dart kit for this and a new pump grip it'll be a nice alternative to the pump-action long shot but I don't know just how well this thing will work with that. I haven't seen much done with the magnus and this is more of the same.
@@WalcomS7 true. I'm thinking along the lines on just something to hook onto where the pump section connects. Scrap the top. Keep the internal mag the same (not my wheelhouse) and then just mossberg strap or vfg the thing for a reliable pump action.
3d printed vertical grip and get rid of the flaring tip for a straight one. slap a real gopro on it maybe?
Awesome!!! I want one of these to take out shields at fort Borst!!
If this thing was minimized, had a better foregrip and had a Tyrant magazine stuck through the top it'd be fantastic
My Bossmerg makes super-loud "clicking" noise until it finally arrives at the last catch,- the "ratcheting mechanism" you mentioned in the nice vid! :) Could you tell, if it is possible, to remove that ratcheting noises (except the last click when it really gets primed)? Do you know which part of it is responsible for the ratcheting, and if removing or modding that away, alters the Blaster in a bad way? Thanks! :)
the slamfire is good because it resembles the game because the tac is the second fastest firerate of all fortnite shotguns i think
Will it K26?
Mod idea! Replace the internal mag with 2 or 3 small rival mags (most likely needs to be 3d print) for an actual shotgun blast.
Its called a tactical shotgun, yet it doesn't have any nerf rails
Little kids: OMG ITS FORTNITE ITS FORTNITE REEEEEEEEEEE REEEEEEEEEE “ does Autistic dance and asks mom for v-bucks”
Please dont use autistic as an abuse.
That's not how all fortnite players act, just the toxic sweaty 8 year olds
I have good idea for a nerf rifle and if every thing works out it could potently be EXTREMELY GOOD. Basically it will use a crank to prime, but it would load like a Martini-Henry. I also like the Nerf FN TS I think it was innovative in some way and give it some time it could basically be the next longshot with modding. I also have an extra idea for this rifle after it's creation, but I plan to see if it could use shells and be like a shotgun, but if I did that then i might need some shells like the buzzbee shells. So what is your option on my Blaster I want to make from scratch?
Seeing the weathered details on this blaster makes me want to get one for post apocalyptic larp reasons. The grip could be minimized and the tip of the blaster can be replaced or repainted
Thank god this showed up in short I was watching botfly removal vids and then I saw a nasty one and you get da idea
Imma be honest here, as much as I’ve seen people use this blaster with ease, I seem to have one MAJOR problem with it (at least with mine).
I have had several mega darts get mangled in this thing when trying to pump it. It gets caught and jams the blaster, to which then I have to get the ol’ pin, press the tiny button and clear the jam.
Maybe there’s a reason why but, idk I’m not much of an expert on it. If anyone can let me now why this blaster jams whenever I try to pump it, that’d be nice to know.
Man, I'd love to get this mechanism to fit into the grenade launcher section of an M-41A pulse rifle! Even if i had to reduce the mag size to 3...
On a modded rapidstrike,masterkey this. Picture it now,full olive green paintjob...led ammo counter built in...
Pulse rifle!!
My theory about the little screen on the Shotgun is that in fortnite you supposed to see enemies and where they are 🤔
"third person shooter with interesting movement mechanic" may i introduce you to vanquish
Yeah I'm talking about a competitive online game. There's plenty of single player options.
Somehow make it take sledgefire/trillogy shells, then maybe I will consider that after taking some sand paper to it. I hate fortcrap.
I cant wait to see if they are going to add a pump shotgun or a smg
I would have never thought I ever see Nerf making a blaster with someone dabbing on it
Definitely wanna get one
Boss murg =Mossburg
It's cool you can kinda load it like a real shotgun
Four dart capacity with four in the back, not too shabby, is it better than a Cycloneshock?
3rd person with good movement? Warframe
YES
Warframe sucks
I haven't had the chance to hold one of these, but...can you wrap your thumb around the front of the pump grip? Might mitigate some of the annoyance of it being sloped in the wrong direction.
Yes, you can put your thumb or index finger into the front of the pump grip.
I like this on a lot because they they Actualy were able to colour it Right
They announced a rocket launcher and hand cannon. ( that actually shoot darts)
the only thing that drives me insane about the design of this, is it looks like a spas 12 with the stock folded onto the top.
but the stock is already out.
other than that mindfuck its great, they finally got a shotgun that loads pretty similar to a how you expect a shotgun to.... even if it's only single shot....
K26?
I found this today at Walmart and bought it on sight.
I got the Magnus to hit a LOT harder with a Hillman #63. I wonder if the TS can take it too...
This is the best fortnite nerf blaster. Ignore how it performs this looks like the tac shotgun. From the shell to how you reload it's just like the tac shotgun. I love this blaster
what this thing needs is a 3d printed plunger head that can take k26
Length x Width x Height? Please and thank you!
I wonder if Its possible to cut the top off to create a realistic looking shotgun
make the internal clip double stack with elites and it will be golden
Have you heard about Splitgate? It's like Halo but with portals
Looks like a mossberg with a racing car on top.
While I despise epic and tim sweeney - this is definitely on my list. I look at this blaster and all I can see are options for a Borderlands mod and repaint.
Why epic games?
It kinda surprised me how they didn't go for Halo or Destiny even Borderlands for a series videogame blasters as they would have so many options its unreal but the Fortnite blasters are cool
Halo would not have worked boomco already did that
well yeah but for example purposes it works
So an update this thing is annoying to work with, I've had to cut part of the sides out to slot in the parts of the evader I'm using, aside from a bit of cosmetic issues it's going together just fine. But it definitely looks like a bandit made piece of crap right now.
Tokimeki Crisis. ***shudders intensely***. The one gashat I don't own. It haunts me.
i really like your orange and purple mega darts. very retro.
They come with the blaster
Ooh.... I'll take ten
Call of duty nerf blaster line is what I'd like to see
That's never gonna happen. (I'm not saying that because I dont like COD.(I like COD) they would be waaaaaaaaaay too realistic )
The Fortnite stuff makes me REALLY hopeful for a Borderlands line in 2020!
That would be cool,but not as good as fortnite
@@Wolfy-en6dv I really hope you're not trying to insinuate that Fortnite is a better game than Borderlands. Fortnite is just another craze that will be dead by next year. Borderlands 2 is 7 years old and still has millions of players. People will be playing Borderlands 3 until 2030!
So it only holds four shots when you could buy four jolts four like 6 bucks
It could probebly fit a k26
First time i see someone opening that blaster.
snowy oh...
@@JaredGuynes holy crap, you did it first, sorry!
snowy it’s all good homie it’s not a contest haha. 🥰
I see no tactical rails on this tactical shotgun
I like this but I want more dart capacity
When is the double barrel mod walcom
It would be awesome if they did Apex Legends themed weapons. Not because I like Apex, but because I love titanfall 2.
Apex is dead btw: titanfall weapons would be cool
Put a prophecy spring in it
I no video is from last year but I got one of these guns and it keeps eating my mage darts any thing I can do to fix it