Programming Spektrum AS3X in less than 5mn

Taking on the opportunity to program an AR8360T on my H9 Piper Pawnee Brave to make a short how to video, first to remember myself the next time I have to do it and second to give anyone some key pointers on how it is done. 10 steps!
1-setting up the plane on the bench with tail in flying position
2-check orientation of the receiver
3-enable flight mode on a switch
4-enter forward programming
5-setting orientation of the receiver
6-assigning gain to a channel and the knob
7-enable AS3X on selected flight mode
8-gain multiplication change
9-assign AS3X gain channel to flight mode switch
10-digital switch setup
Hope it to be as helpful for you than it is for me

[@jimmcgolf]

Thank you Stephane for creating this video on programming AS3X. Very well done and easy to follow.

[@StephaneRuelle]

Glad you enjoyed it!

[@boxlessthinker1973]

Extremely helpful!

[@StephaneRuelle]

Glad to hear!

[@larryhuck4504]

Good & helpful video. Thank you Stephane. Along the line of being helpful, after I think I've got AS3X set up correctly, I always forget to advance the throttle sufficiently to activate AS3X in my airplanes. I go nuts sometimes trying to figure out what I did wrong in the programing steps.

[@StephaneRuelle]

Glad it helped you, I was tired to look at 30+ minutes video to remember myself how to do it, so I decided to eat the blet and do one, at least for me ;-)

[@txkflier]

1. When the gain channel output is at -100% (knob fully CCW), the AS3X gain is 0%. At +100% (knob fully CW), the AS3X gain is 100% of the maximum gain setting. And at 0% (knob mid-position) the AS3X gain Is 50% of the maximum, not 0%.
2. Switch D should be used for flaps. If the plane doesn’t have flaps, switch D shouldn’t be used for something else.