@jason01095 We are transitioning the "Firewood Guy" business which is our local operating name to the "FiveOaks Firewood" business over time to reduce any confusion with local customers it's an involved process we are working through.
There is a UK company called Fuelwood that have some nice equipment, there is a small YTber running the equipment if you want to have a look at how good it is, the channel is called Oak Farm Firewood.
My father was a professional blacksmith. He was also a good welder. In 1978, he build a wood splitter on an I-beam above a frame that rode on Chevy car wheels/tires. The hydraulic system was a closed system (the pump was in the oil reservoir) and the business end was an upright flared wedge a foot tall. The I-beam could be turned on a central pin to run inline with the towing vehicle, then turned sideways (in line with the wheels) to split wood. An 8hp Briggs and Stratton provided power. We had lots of timber on the family ranch in Montana, and we sold firewood as a sideline to keep us busy in the winter. I still have the machine and use it every year to work up firewood for my home. I'm on the fourth engine, the hydraulic system is the original, and I've painted it to look like a John Deere implement, complete with John Deere decals. I'm 76 years old. This splitter will be going long after I'm gone. How many splitters today can put up a record like that??
Ours is basically the same thing. It's sitting on some old wagon axle. Before my time it has a 2.3 ford engine on it. We put a few different Briggs engines on it over the years. I think the smallest was a 3.5hp and the biggest I remember was an 8hp. My brother still lives there and the house has only ever been heated with wood. I think it has a predator 212 on it now. I think we've replaced a couple hoses over the years but that's it. The tires are OLD but hold air just long enough to move it around the property. A buddy has one from tsc and is constantly working on it, had issues getting warranty stuff done and has had nothing but issues getting parts for it. Home owner quality equipment is junk after a few years now. We need to keep the old stuff going.
@@aaadamt964 The tires and wheels on the splitter my Dad built are from my Mom's 1953 Chevy Bel Aire, studded snow tires, of course. Isn't this old stuff great???
@robertodebeers2551 I was just talking about this on fb. I refuse to buy new stuff. I'm probably more "green" than the green people. I have an old dolly I got at a garage sale foe next to nothing. It's much better than anything made today. I have some left over metallic red base coat I'm going to paint it with. I'll have a custom painted,vheavy duty dolly for less than $20 painted professionally with left over professional paint.
It's crazy when I think back into the 90,s I would get laid off from construction every winter and I would hand split firewood to sell to keep food on the table. Very impressive system 👍🏻
Oak Farm Firewood has a complete processor that uses the same sort of splitter, but he also has a log table and an automated bucking station He basically only needs one person to babysit the processor, load the logs and rotate his toads or bags.
That is most impressive and a very clever design. Kudos to Pinosa for making such a fine machine and kudos to you for highlighting why it is such a good splitter. Great video Adam thumbs up.
Very cool machine......I don't worry about smaller pieces as most people want kindling anyway. Once heard a wise man say "You can build a big fire with small pieces, but you can't build a small fire with big pieces"
@@Fanta.... This machine was made to satisfy the picky snobs that think everything has to be a perfect size and visually appealing. He still has to find buyers for all of the off-sized pieces or send it over to the mulching machine.
@@Rattlerjake1 I agree ! The smaller the pieces the faster the wood will burn also. If the logs need to be split that small why not just grind them to dust !
With management..........you can build any sized fire you wish. After all.......a fire does start with a " spark " Thats about as tiny as a fire as you need ! Larger fire ? Add more wood !
Yeah, but if you want to heat a home like I do, I'm wanting larger pieces that'll burn for a few hours. That wood is closer in size to my kindling than my firewood.
Those splits are about one-third the thickness of my biggest at home. I like having a variety of sizes, depending on the stage of the fire. When I go to bed, I throw in a big solid piece of hardwood.
Most folks like projects. They like looking at the final product. The process to get there is immaterial. Then there are folks like Matt and I who love the process. Even if you magically get the result you want, if you don't understand how you got there, sooner or later, the process will break down, and you won't know how to fix it. Make the process precise, and then you can adjust it to make it accurately give you the results you want.
I just stopped video at the five minute mark when Matt started to talk about his new machine, because I literally thought it might have switched to a different person suddenly. I was wearing some low power magnifiers which weren't quite enough for me to see well at the time. Anyway, I just wanted to comment about this because it seemed like night and day when Matt started talking about his new splitter. I'm gonna way out on a limb and predict that he loves it! His energy has shifted so much. I hope I'm right because that would reflect that Matt is an authentic person. Such people are rare in my area, but such a joy to run into.
Japa and Pezzolato both have x-knife splitters similar to this, with the difference that the rounds are loaded vertically rather than horizontally - so the pile doesn't collapse and leave you with much more random sizes. Follow this machine with a trommel-tumbler with size grading bars and you will strip out most of the undersized stuff. That undersized stuff can be fed to a chipper to produce wood chips, those can be sent to a size grading machine to filter out the smallest chips, which you can send to a hammer mill to pulverize to saw dust. That sawdust can be run with the waste stream from the saw into a pellet mill to make pellets. There doesn't have to be a lot of waste.
The Austrian company Posch uses this X-style wedge for their processors. They have all kinds of setups, some fully automated, really magnificent. They are really a premium company.
This video reminds me about the semi trucks. One other american youtuber said there are 20 years behind. At least with the interior. But it worked and so there was not really much of a progress. Now like because of him it gets slowly rolling. For a mill for example i would want different cutting blades. Not only 2 inch and cut the standard size. I would want only one to cut, but when needed with different blade sizes. And so you will work more efficient with less waste.
Although it was an impressive machine, I'm also impressed with the video coordination showing the process and matching each scene with a detailed description, we'll done.
GOOOOOOD MAAAAAAAAWNIN EVERYONE!!…. Adam that is one bad ass machine & operation. Talk about production…Unfrickinbelievable Thanks for sharing Have a day😊
Those type of logsplitters have been around in Europe for a while. You can lookup the Posch 420 Autologger & the Fuelwood Splitta 400. Great for straight grained stuff, struggle with knots a bit though.
I have the Posch version of that, I adjust to run kindling, cook wood and regular firewood. Amazing system to traditional splitters. Rabaud makes one too!
What a cool video, Adam and Matt! Matt, I am blown away with your equipment and processes. I just purchased an Allwood Log Splitter and bought an old grain conveyor. Our process is fast, but nothing compared to yours. Thanks for sharing sharing the video! Cheers
Good day Adam! I’m impressed with that machine yet so simple using a X pattern and advancing rounds forward. Why has no one else thought of this? Great video my friend. 👌🏻🔥🇨🇦
Neat to see the progress. I am one of those guys who like to dial in the process, continually improving it, and making 1 step of progress at a time. Matt seams to be the same way. Great video Adam
Great video, both of you share some fascinating insights, really appreciate Matts willingness to give us a glimpse into his business. Wannabe wood mill owner here in UK
Very nice organized business very well thought out, and he grew with it overtime…. Out of his experience and I saw the kind of equipment he has. He definitely thought outside the box, but he maximized his profit down on a lot of the things that he can get away with. That was a very smart concept he used with that Pinosa.
50+ Years ago, a fellow with a small sawmill on the river decided to make firewood, but he had a plan from beginning to end. He already had a ladder into the river which brought the logs up to the mill, so it was simple to build the firewood operation off to the side. He began by measuring the width of the alley ways he was going to deliver to. This dictated the lengths of the trucks and bins he built. His bins held 8 cords and had 8 compartments.. Buy pulling the pins he could deliver 2 or more cords to the same address. The trucks had driver standup cabs, like some garbage truck, but were custom built to be shorter. The bins rode on a track, so the wood came out of the water, filled the bins and the bins moved along the track to where the trucks picked them up. One man ran the entire fire wood side. He started with 6 trucks, 12 bins, but quickly built 6 more. He was purchasing "pulp" for $20 a cubic meter. The slabs from the mill also fed into the fire wood productions. Most of the machinery was built on site from green chains and "junk" dragged out of the bush. This operation produced a net of $1m+ the first year. IIRC the owner retired after 4 years. The Hometown Acres operation has too many people, handles the wood too many time and makes a huge mess requiring cleanup.
Cool machine, very productive and robust. We never split firewood that small for our fireplaces or stoves, it burns up too fast and you have to keep feeding it all night. We made big chunks and kindling.
Exactly....... small pieces burn too fast ! I no longer spit firewood. Built my own wood stove......it has a 3x3 foot door .....I use the tractor and loader to fill it. Semi tires work great ! With a fire box 4x4x5 foot... just fill it once a week. All is good !
@@JimHerman-o3q Yeah, a wood furnace is awesome, but most people have fireplaces and small to medium stoves. But even medium stoves can use 5-6" wood more efficiently than the little 4" stuff.
@@JimHerman-o3q Most people in the US don't heat their homes with wood stoves. Depending on your location, there is a much bigger market for smaller splits and ultimately more profit.
You did an excellent video how you describe this this gives you some idea common people how to figure out their businesses which I have one already is delivery service out of East Tennessee based out there and it’s amazing to see your kind of things you’re doing…
Wow that machine is amazing. Also, i dont understand how the smaller pieces are "waste". Those dry faster and burn just as good, plus it adds some variation for a customer. Its a win win. As a customer and a producer, i would want those smaller pieces mixed in with the wood i buy
You could add a camera or scale to the conveyor to recognize and deflect the chaff at a drop point. The tech is widely used in agriculture and manufacturing.
High quality video! Great machine, very interesting. An illustration of how much time and effort and expense is involved with selling firewood... I find it interesting that they're selling 0.72 cu ft of the small firewood for $54. If my calculator is correct, that's over $9,500 per cord, lol. If I were someone with a pizza oven, I think I'd buy an axe. I guess some people are just too lazy. More power to the seller's, capitalism at its finest! (And what's crazy is they're probably not even 'getting rich' at it!)
Love to see improvements in technology. Where in this process is the chaff removed from the finished product. Does he send the chaff through the kiln? The box wedge and this process both seem to produce a lot of chaff. You should have brought neighbor Doug with you for his review of this new process. Great video.
Great video Matt my Company has been manufacturing firewood for years here in Connecticut with a woodmizer box splitter the pinosa blows it away in effieciency and production!
Pretty amazing. If they make all the other equipment that was mentioned, he could clearly improve the process with a log deck and cutter that's set to automatically feed the logs to the splitter. I'm guess that might be in the future after he gets some time and ROI on the splitter. Seems like his process might also benefit from a chaff separator on the conveyor. He also didn't mention what happens to the chaff or splits that are too small. Does he sell those as some other type of wood, or does all that waste get fed to the mulching operation?
Fun fact: Europe had wood heated bath houses 2400 years ago. With better efficiency than a modern American wood boiler. Did you already see our spider ? The fully automated lumberjack that walk through the forrest on hydrolic legs. Will cut your tree, remove the branches and cut the desired length in one go. We let them dry there in the wood before we remove them by horse. Not a single tire or track needs to be in our forrests (as it should be).
Very nice for easy splitting straight wood at consistent size. I grew up old school with wood we cut right out of the woods or where ever wood was available. For us we used a Prentice later called LaFont wood splitters with a 13 inch knife. When the wood was to tough to split it would sheer it off. We would sell 300-400 full cords a year all made the same way….
System needs a conveyor to move the rounds from processor to splitter. The log axis is already lined up. A conveyor plus cylinder to push the round to the splitter add automation. Nice video.
A couple of thoughts on this: 1. The smaller splits are a whole new market for the camping world that is looking for that size. This could even be wholesaled to a bundler. 2. Design - if the splitting knives/wedges had 2 or 3 horizontal blades, followed by 2 or 3 vertical blades instead of an X, while using the same feeding/splitting process, I believe that would greatly reduce small splits. That feeding process would hold everything in place while the wood is being split. Something to consider.
It looks like you guys could place another log on top of the first row coming down and double your production for the same movement of the splitter. Hope this helps your production:)
I don't like how the man picking the firewood off the cutter has to pick up and then turn to load the splitter. If at all possible, rearrange to get that in front of him so it is up and forward. That fellow loading is older than me and my back and knees start hurting after half an hour of that. I worked at an engine plant doing Lean Manufacturing for a few years before I moved over to software development so this isn't a criticism, just a suggestion of what I would have recommended to the facilities folks that are in charge of floor layout. BTW I love Matt's attitude. Reminds me of the steel tycoon, Andrew Carnegie, who had just had new furnaces put in at a tremendous cost. When he learned they were not the most up to date and replacing them would generate more profit in the long run, he had the latest technology installed. He understood the efficiency gains would far outweigh the sunk cost. He also would drive his furnaces at race speed then just swap them out in 3 years. Other companies would baby their furnaces to get 12+ years out of them. But he would make more profit and get the newest tech every 3 years. This let him leave the competition in the dust. I have no doubt Matt is doing the same.
Looks to me like that thing works about as good as it gets! Speed could probably be improved, but then you’d have an even harder time keeping up. Neat video!
Holy smokes does this fella process wood Curious wHo is the Gentlemen and how do get in touch with him 100% by far the best firewood cutting tool ive seen simple and fast &lasting= Good engineering
Hi Adam: Firewood is a major part of our business. We just got a contract for producing bundled firewood, so I’m looking for options. I will be taking a look at this company to see what they offer.
I hope those guys loading bucked wood into the machine are wearing hearing protection deep inside their ears. If not, they sure should be wearing inner ear plus 35 db rated headphone protection. Exposure to constant whining and machine noises like that over years will result in significant hearing loss. My Dad was a pressman and worked next to a 4-color offset Heidelberg for many years. It didn't seem that loud, but the daily day-long exposure gradually made him extremely hard of hearing. Thanks for the cool video. I'm still doing a combination of machine and hand-splitting for heat, generating about 7-8 cords a season. Best hack for hand splitting was putting a doughnut of two stacked tires around a low stump. Catches and holds the wood until you split it as you like it. No bending over to pick it up every time or trying to balance it in place. The tire surround does that for you.
Instead of a constant increment in the feed belt, add a feedback loop to advance the belt to align the center of the next log with the center of the cutting "X" (using machine vision and the video we saw here). That might make the output sizes more uniform and reduce waste.
It's no problem to sell the small pieces from that wood as kindling its done in Norway i saw a British company that had a similar system except that the cubes where automatically transferred to the splitter
Very cool machine. Big question when are you going to hook up with Spinoza to demo one in your new barn? Spinoza needs so visibility here in north America and you just helped them big time.
Seems like it needs a way to overcut to break the final strands holding the splits together (esp on certain species). A very basic control input to keep it from cutting near the edges of the rounds would avoid a lot of that waste. Could have a little finger drag along and if it's lower than say an inch above the center of the 'x' then keep moving until it picks back up.
If you lower the splitter unit you can auto feed it with the roller type conveyor tables, no need to lift and turn every single piece... for not more than maybe 150 to 300 usd ..
I wonder if it would handle our Jarrah and other hardwoods in Western Australia. Some of our timber is har to split with an axe if the grain is a bit twisted.
I've got a splitter, but looking for something a bit easier. I am only splitting for myself and a couple neighbors also. This is obviously much more than we would need. But I see that the Pinosa does make a lot more "waste" stuff. I've been burning wood for 50 + years. I have 3 active burners myself. Two wood stoves, where I can feed with up to 20" logs, though 16 to 18 is nicer. I wouldn't mind some small stuff as it starts more easily. But I also have a larger stove for my shop where I do much better with large firewood. up to 10" diameter, and 20" is fine. If I put in smaller stuff, it burns too fast. So I separate out large chunks and keep those for that stove. Might be that Matt might have a market for larger logs. But I suppose that is not profitable for him to have multiple skus like that.
The Machines biggest problem is the materials handling in and out. Seriously need to realise how inefficient the process is. Rounds are cut, at that point the unit is known and can be handled automatically but the drop, randomising. So some blokes need to grab and orientate for the splitter. The splitter splits in a known size and orientation but then pushes it onto a conveyor that bulk manages it and again it's randomised. Conveyor unloads into a truck, bucket or ground again randomising and increasing volume. Take out the randomising, maintain control of the pack. Allows for a number of selling options that cost nothing after the initial material handling fix and allows for added value.
I have 2 wood burners and the regular wood is way too small for my wood burners. I would have those 16 inch rounds split in half and that's it. Wood that is cut so small is like burning paper or cardboard. It burns fast and hot but you are constantly feeding which means you have work through a lot of wood. I have 10 cords of wood on my property that I have to work through because it's cut very thin and it will burn fast. I bought some oak rounds and had those delivered and I will split those myself with an axe and sledgehammer. The combination of both worked well for me last year and that's why I'll do it again this year.
Nothing will make kindling or mini firewood faster or more efficient than this machine. Ive seen other producers have a conveyor frim the processor with 2-4 people doing resplits grabbing the bigger junks and splitting them down then back onto the conveyor up into a truck, or kiln baskets. Less labor is key to making more profit tho
Matt, is there any way to save labor and funnel those rounds once cut into the X splitter? The manual labor to move rounds at around the 11:24 mark seems like an opportunity to minimize touches/labor on the product?
We are working on it currently. We were just getting going with it in the video and figuring out it's speed and what should be done to improve the process.
It seems to me like it would make more sense, rather than buying a whole new machine, to simply run the firewood from the processes over a large gap screen. The wood that falls through is good, the wood that doesn't needs to be resplit. Seems like quite a luxury to be running 2 machines
Link to Matts mini firewood on Amazon
www.amazon.com/shop/hometownacres
Matt's company == FiveOaks Firewood == FirewoodGuy, Adam? Thanks
@jason01095 We are transitioning the "Firewood Guy" business which is our local operating name to the "FiveOaks Firewood" business over time to reduce any confusion with local customers it's an involved process we are working through.
😊😊😊😊@@jason01095
There is a UK company called Fuelwood that have some nice equipment, there is a small YTber running the equipment if you want to have a look at how good it is, the channel is called Oak Farm Firewood.
You are calling it??, it has ears and understands what you say, even with that voice!, is its name 'Guy' by any chance?
My father was a professional blacksmith. He was also a good welder. In 1978, he build a wood splitter on an I-beam above a frame that rode on Chevy car wheels/tires. The hydraulic system was a closed system (the pump was in the oil reservoir) and the business end was an upright flared wedge a foot tall. The I-beam could be turned on a central pin to run inline with the towing vehicle, then turned sideways (in line with the wheels) to split wood. An 8hp Briggs and Stratton provided power. We had lots of timber on the family ranch in Montana, and we sold firewood as a sideline to keep us busy in the winter. I still have the machine and use it every year to work up firewood for my home. I'm on the fourth engine, the hydraulic system is the original, and I've painted it to look like a John Deere implement, complete with John Deere decals. I'm 76 years old. This splitter will be going long after I'm gone. How many splitters today can put up a record like that??
thank you for sharing .
it'd be really cool to see a video of it in action.
Ours is basically the same thing. It's sitting on some old wagon axle. Before my time it has a 2.3 ford engine on it. We put a few different Briggs engines on it over the years. I think the smallest was a 3.5hp and the biggest I remember was an 8hp. My brother still lives there and the house has only ever been heated with wood. I think it has a predator 212 on it now. I think we've replaced a couple hoses over the years but that's it. The tires are OLD but hold air just long enough to move it around the property. A buddy has one from tsc and is constantly working on it, had issues getting warranty stuff done and has had nothing but issues getting parts for it. Home owner quality equipment is junk after a few years now. We need to keep the old stuff going.
@@aaadamt964 The tires and wheels on the splitter my Dad built are from my Mom's 1953 Chevy Bel Aire, studded snow tires, of course. Isn't this old stuff great???
@robertodebeers2551 I was just talking about this on fb. I refuse to buy new stuff. I'm probably more "green" than the green people. I have an old dolly I got at a garage sale foe next to nothing. It's much better than anything made today. I have some left over metallic red base coat I'm going to paint it with. I'll have a custom painted,vheavy duty dolly for less than $20 painted professionally with left over professional paint.
It's crazy when I think back into the 90,s I would get laid off from construction every winter and I would hand split firewood to sell to keep food on the table. Very impressive system 👍🏻
Oak Farm Firewood has a complete processor that uses the same sort of splitter, but he also has a log table and an automated bucking station He basically only needs one person to babysit the processor, load the logs and rotate his toads or bags.
I’ve seen it, FULLY automated, very cool setup.
I was coming in the comments to say the same thing. Oak Farm Firewood has a killer automated set up over in the UK
Thanks guys!
Also, Oak Farm Firewood is a really enjoyable channel, recommended. A very slick professional set-up, plus good video editing.
What toads?
That is most impressive and a very clever design. Kudos to Pinosa for making such a fine machine and kudos to you for highlighting why it is such a good splitter. Great video Adam thumbs up.
Thank you very much!
😂 ale v realite je to extrémne zlý spôsob štiepania.
Muž sa upracuje k smrti 😢
Those little pieces are not waste! They make great kindling to get a fire going and even if you throw them in an established fire they burn fine.
Very cool machine......I don't worry about smaller pieces as most people want kindling anyway. Once heard a wise man say "You can build a big fire with small pieces, but you can't build a small fire with big pieces"
yeah the concern about the small pieces is a bit weird. its all getting burned to ash anyway.
@@Fanta.... This machine was made to satisfy the picky snobs that think everything has to be a perfect size and visually appealing. He still has to find buyers for all of the off-sized pieces or send it over to the mulching machine.
@@Rattlerjake1 I agree ! The smaller the pieces the faster the wood will burn also. If the logs need to be split that small why not just grind them to dust !
With management..........you can build any sized fire you wish. After all.......a fire does start with a " spark " Thats about as tiny as a fire as you need ! Larger fire ? Add more wood !
Yeah, but if you want to heat a home like I do, I'm wanting larger pieces that'll burn for a few hours. That wood is closer in size to my kindling than my firewood.
Those splits are about one-third the thickness of my biggest at home. I like having a variety of sizes, depending on the stage of the fire. When I go to bed, I throw in a big solid piece of hardwood.
Most folks like projects. They like looking at the final product. The process to get there is immaterial. Then there are folks like Matt and I who love the process. Even if you magically get the result you want, if you don't understand how you got there, sooner or later, the process will break down, and you won't know how to fix it. Make the process precise, and then you can adjust it to make it accurately give you the results you want.
Thats pretty impressive. Looks like the mini fire wood is dialed in with that machine.
Nice machine Adam, Thanks for sharing the process of how it works.
I just stopped video at the five minute mark when Matt started to talk about his new machine, because I literally thought it might have switched to a different person suddenly. I was wearing some low power magnifiers which weren't quite enough for me to see well at the time. Anyway, I just wanted to comment about this because it seemed like night and day when Matt started talking about his new splitter. I'm gonna way out on a limb and predict that he loves it! His energy has shifted so much. I hope I'm right because that would reflect that Matt is an authentic person. Such people are rare in my area, but such a joy to run into.
Excellent video In matt's operation is so cool thanks for taking us along
Japa and Pezzolato both have x-knife splitters similar to this, with the difference that the rounds are loaded vertically rather than horizontally - so the pile doesn't collapse and leave you with much more random sizes.
Follow this machine with a trommel-tumbler with size grading bars and you will strip out most of the undersized stuff. That undersized stuff can be fed to a chipper to produce wood chips, those can be sent to a size grading machine to filter out the smallest chips, which you can send to a hammer mill to pulverize to saw dust. That sawdust can be run with the waste stream from the saw into a pellet mill to make pellets. There doesn't have to be a lot of waste.
That’s pretty dang cool, thanks for bringing it to us on here to watch!! 😃
It's nice to finally see this in "person." I've only seen it from the manufacturer's as well. Really impressive.
Intelligence meets Practical meets engineering with Good Guys = EXELLENCE made my day
The Austrian company Posch uses this X-style wedge for their processors. They have all kinds of setups, some fully automated, really magnificent. They are really a premium company.
This video reminds me about the semi trucks. One other american youtuber said there are 20 years behind. At least with the interior. But it worked and so there was not really much of a progress. Now like because of him it gets slowly rolling. For a mill for example i would want different cutting blades. Not only 2 inch and cut the standard size. I would want only one to cut, but when needed with different blade sizes. And so you will work more efficient with less waste.
Although it was an impressive machine, I'm also impressed with the video coordination showing the process and matching each scene with a detailed description, we'll done.
GOOOOOOD
MAAAAAAAAWNIN EVERYONE!!….
Adam that is one bad ass machine & operation. Talk about production…Unfrickinbelievable
Thanks for sharing
Have a day😊
Those type of logsplitters have been around in Europe for a while.
You can lookup the Posch 420 Autologger & the Fuelwood Splitta 400.
Great for straight grained stuff, struggle with knots a bit though.
Americans thinking they found someone who's invented the wheel again Europeans miles ahead
I have the Posch version of that, I adjust to run kindling, cook wood and regular firewood. Amazing system to traditional splitters. Rabaud makes one too!
What a cool video, Adam and Matt! Matt, I am blown away with your equipment and processes. I just purchased an Allwood Log Splitter and bought an old grain conveyor. Our process is fast, but nothing compared to yours. Thanks for sharing sharing the video! Cheers
This and the firewood delivery video were both fascinating, especially seeing the business insights of it all.
Good day Adam! I’m impressed with that machine yet so simple using a X pattern and advancing rounds forward. Why has no one else thought of this? Great video my friend. 👌🏻🔥🇨🇦
I’m hoping some other manufacturers start coming out with something similar
I love seeing how things are done. Pretty cool system he has.
Your content is always fresh. That splitter is out of this world!
Thanks Harold!
Amazing video Adam! The simplicity of a processor that size is very impressive. To be able to change the size direction within five minutes is crazy.
Neat to see the progress. I am one of those guys who like to dial in the process, continually improving it, and making 1 step of progress at a time. Matt seams to be the same way. Great video Adam
Great video, both of you share some fascinating insights, really appreciate Matts willingness to give us a glimpse into his business.
Wannabe wood mill owner here in UK
Very nice organized business very well thought out, and he grew with it overtime…. Out of his experience and I saw the kind of equipment he has. He definitely thought outside the box, but he maximized his profit down on a lot of the things that he can get away with. That was a very smart concept he used with that Pinosa.
Very interesting machine. Great video Adam, thank you for providing it for us all!! The firewood guy has a great setup!
50+ Years ago, a fellow with a small sawmill on the river decided to make firewood, but he had a plan from beginning to end. He already had a ladder into the river which brought the logs up to the mill, so it was simple to build the firewood operation off to the side. He began by measuring the width of the alley ways he was going to deliver to. This dictated the lengths of the trucks and bins he built. His bins held 8 cords and had 8 compartments.. Buy pulling the pins he could deliver 2 or more cords to the same address. The trucks had driver standup cabs, like some garbage truck, but were custom built to be shorter. The bins rode on a track, so the wood came out of the water, filled the bins and the bins moved along the track to where the trucks picked them up. One man ran the entire fire wood side. He started with 6 trucks, 12 bins, but quickly built 6 more. He was purchasing "pulp" for $20 a cubic meter. The slabs from the mill also fed into the fire wood productions. Most of the machinery was built on site from green chains and "junk" dragged out of the bush. This operation produced a net of $1m+ the first year. IIRC the owner retired after 4 years. The Hometown Acres operation has too many people, handles the wood too many time and makes a huge mess requiring cleanup.
Cool machine, very productive and robust. We never split firewood that small for our fireplaces or stoves, it burns up too fast and you have to keep feeding it all night. We made big chunks and kindling.
Exactly....... small pieces burn too fast ! I no longer spit firewood. Built my own wood stove......it has a 3x3 foot door .....I use the tractor and loader to fill it. Semi tires work great ! With a fire box 4x4x5 foot... just fill it once a week. All is good !
@@JimHerman-o3q Yeah, a wood furnace is awesome, but most people have fireplaces and small to medium stoves. But even medium stoves can use 5-6" wood more efficiently than the little 4" stuff.
@@JimHerman-o3q Most people in the US don't heat their homes with wood stoves. Depending on your location, there is a much bigger market for smaller splits and ultimately more profit.
Tell me about it we processed 1000 ton in three winters now I’m on a pension no back left. Great video thank you. Cheers Peter
Italians are excellent engineers that build delicate equipment !
I've never seen something like this. It is pretty dang cool. Thanks for sharing this! Both of you guys.
Awesome video, I enjoyed seeing that machine in action.
Great video and looks like a great piece of equipment
You did an excellent video how you describe this this gives you some idea common people how to figure out their businesses which I have one already is delivery service out of East Tennessee based out there and it’s amazing to see your kind of things you’re doing…
great video. thanks for showing the new splitter and explaining it. its pretty cool and seems to be a beast, not to mention versatile.
I love wood and wood spliting - super video
Wow that machine is amazing. Also, i dont understand how the smaller pieces are "waste". Those dry faster and burn just as good, plus it adds some variation for a customer. Its a win win. As a customer and a producer, i would want those smaller pieces mixed in with the wood i buy
This was an awesome video. Like they say, more tools make lighter work.. TY for sharing.👍🇺🇸
Hey, brother. That is one amazing machine! But I bet it would change Your heart rate to write that check! Hope you have a Blessed day. Chip
You could add a camera or scale to the conveyor to recognize and deflect the chaff at a drop point. The tech is widely used in agriculture and manufacturing.
Love seeing new ways to do things. Thx Adam! That machine is pretty slick! Best, -- J. Andre. / Old Iron Acres
High quality video! Great machine, very interesting. An illustration of how much time and effort and expense is involved with selling firewood... I find it interesting that they're selling 0.72 cu ft of the small firewood for $54. If my calculator is correct, that's over $9,500 per cord, lol. If I were someone with a pizza oven, I think I'd buy an axe. I guess some people are just too lazy. More power to the seller's, capitalism at its finest! (And what's crazy is they're probably not even 'getting rich' at it!)
Love to see improvements in technology. Where in this process is the chaff removed from the finished product. Does he send the chaff through the kiln? The box wedge and this process both seem to produce a lot of chaff. You should have brought neighbor Doug with you for his review of this new process. Great video.
very smart little technique. cool stuff
Great video Matt my Company has been manufacturing firewood for years here in Connecticut with a woodmizer box splitter the pinosa blows it away in effieciency and production!
Sounds like he really cares about the product he offers to his customers. Very rare quality nowadays
Pretty amazing. If they make all the other equipment that was mentioned, he could clearly improve the process with a log deck and cutter that's set to automatically feed the logs to the splitter. I'm guess that might be in the future after he gets some time and ROI on the splitter. Seems like his process might also benefit from a chaff separator on the conveyor. He also didn't mention what happens to the chaff or splits that are too small. Does he sell those as some other type of wood, or does all that waste get fed to the mulching operation?
Fun fact: Europe had wood heated bath houses 2400 years ago. With better efficiency than a modern American wood boiler.
Did you already see our spider ? The fully automated lumberjack that walk through the forrest on hydrolic legs. Will cut your tree, remove the branches and cut the desired length in one go.
We let them dry there in the wood before we remove them by horse. Not a single tire or track needs to be in our forrests (as it should be).
Fun fact: Roger has no clue what he's talking about spewing about efficiency numbers from 2400 years ago.
Very nice for easy splitting straight wood at consistent size. I grew up old school with wood we cut right out of the woods or where ever wood was available. For us we used a Prentice later called LaFont wood splitters with a 13 inch knife. When the wood was to tough to split it would sheer it off. We would sell 300-400 full cords a year all made the same way….
Very cool splitter. Thanks for showing us
System needs a conveyor to move the rounds from processor to splitter. The log axis is already lined up. A conveyor plus cylinder to push the round to the splitter add automation. Nice video.
A couple of thoughts on this:
1. The smaller splits are a whole new market for the camping world that is looking for that size. This could even be wholesaled to a bundler.
2. Design - if the splitting knives/wedges had 2 or 3 horizontal blades, followed by 2 or 3 vertical blades instead of an X, while using the same feeding/splitting process, I believe that would greatly reduce small splits. That feeding process would hold everything in place while the wood is being split. Something to consider.
The big advantage of the X-wedge is that you can change the splitting size depending on how far the conveyor moves forward.
It looks like you guys could place another log on top of the first row coming down and double your production for the same movement of the splitter. Hope this helps your production:)
Great review of a remarkable splitter.
GREAT VIDEO, LOVE TO SEE WOOD BEING SPLIT. Should get into wood pellets too.
Great video explaining a very interesting machine.
I don't like how the man picking the firewood off the cutter has to pick up and then turn to load the splitter. If at all possible, rearrange to get that in front of him so it is up and forward. That fellow loading is older than me and my back and knees start hurting after half an hour of that. I worked at an engine plant doing Lean Manufacturing for a few years before I moved over to software development so this isn't a criticism, just a suggestion of what I would have recommended to the facilities folks that are in charge of floor layout. BTW I love Matt's attitude. Reminds me of the steel tycoon, Andrew Carnegie, who had just had new furnaces put in at a tremendous cost. When he learned they were not the most up to date and replacing them would generate more profit in the long run, he had the latest technology installed. He understood the efficiency gains would far outweigh the sunk cost. He also would drive his furnaces at race speed then just swap them out in 3 years. Other companies would baby their furnaces to get 12+ years out of them. But he would make more profit and get the newest tech every 3 years. This let him leave the competition in the dust. I have no doubt Matt is doing the same.
If you had listend to the video, they are testing the splitter and this is ther second day doing it.
Looks to me like that thing works about as good as it gets! Speed could probably be improved, but then you’d have an even harder time keeping up. Neat video!
Yep, pinosa, pezzalato and posch from europe have been doing this style for decades.
Holy smokes does this fella process wood Curious wHo is the Gentlemen and how do get in touch with him 100% by far the best firewood cutting tool ive seen simple and fast &lasting= Good engineering
THIS MAN HAS THE SET UP!!!
VERY INFORMATIVE 🌲 thank you for sharing..
Hi Adam: Firewood is a major part of our business. We just got a contract for producing bundled firewood, so I’m looking for options. I will be taking a look at this company to see what they offer.
I like the stuff they call waste I like all the sizes that come out of that machine.
I hope those guys loading bucked wood into the machine are wearing hearing protection deep inside their ears. If not, they sure should be wearing inner ear plus 35 db rated headphone protection. Exposure to constant whining and machine noises like that over years will result in significant hearing loss. My Dad was a pressman and worked next to a 4-color offset Heidelberg for many years. It didn't seem that loud, but the daily day-long exposure gradually made him extremely hard of hearing. Thanks for the cool video. I'm still doing a combination of machine and hand-splitting for heat, generating about 7-8 cords a season. Best hack for hand splitting was putting a doughnut of two stacked tires around a low stump. Catches and holds the wood until you split it as you like it. No bending over to pick it up every time or trying to balance it in place. The tire surround does that for you.
Man idk? The one you have works good for your setup. It is an awesome machine.
Love this machine. Wish you had mentioned the cost or if the only way to acquire it is direct from Italy
Instead of a constant increment in the feed belt, add a feedback loop to advance the belt to align the center of the next log with the center of the cutting "X" (using machine vision and the video we saw here). That might make the output sizes more uniform and reduce waste.
wow that blue splitting machine is nice!!!
It's no problem to sell the small pieces from that wood as kindling its done in Norway i saw a British company that had a similar system except that the cubes where automatically transferred to the splitter
Really looks well designed and efficient. Would like to see how it is in the long term.
One blade on pusher offset 60° 'wood, make less waste 😅
Very cool machine. Big question when are you going to hook up with Spinoza to demo one in your new barn? Spinoza needs so visibility here in north America and you just helped them big time.
That would be cool
13:47 my man is watching his job disappear before his eyes 😂
Cool Video
That will get back 40 Dan excited I'm sure.
Wow interesting splitter 👍
Seems like it needs a way to overcut to break the final strands holding the splits together (esp on certain species).
A very basic control input to keep it from cutting near the edges of the rounds would avoid a lot of that waste. Could have a little finger drag along and if it's lower than say an inch above the center of the 'x' then keep moving until it picks back up.
Improving the loading of the splitter would be the next step solid start.
If you lower the splitter unit you can auto feed it with the roller type conveyor tables, no need to lift and turn every single piece... for not more than maybe 150 to 300 usd ..
Awesome wood splitter. Where did you buy & how much does one like yours cost, if you don’t mind me asking. Thanks
What a great idea real time saver 🇳🇿❤️
Yep went from one person operation to two person.
The only thing I'd add would be some sort of paddle on that final conveyor belt to keep the pieces from rolling off or back down the conveyor
Amazing machine!
Awesome video thanks.thats one very cool spiter
I wonder if it would handle our Jarrah and other hardwoods in Western Australia. Some of our timber is har to split with an axe if the grain is a bit twisted.
I've got a splitter, but looking for something a bit easier. I am only splitting for myself and a couple neighbors also. This is obviously much more than we would need. But I see that the Pinosa does make a lot more "waste" stuff. I've been burning wood for 50 + years. I have 3 active burners myself. Two wood stoves, where I can feed with up to 20" logs, though 16 to 18 is nicer. I wouldn't mind some small stuff as it starts more easily. But I also have a larger stove for my shop where I do much better with large firewood. up to 10" diameter, and 20" is fine. If I put in smaller stuff, it burns too fast. So I separate out large chunks and keep those for that stove. Might be that Matt might have a market for larger logs. But I suppose that is not profitable for him to have multiple skus like that.
The Machines biggest problem is the materials handling in and out. Seriously need to realise how inefficient the process is. Rounds are cut, at that point the unit is known and can be handled automatically but the drop, randomising. So some blokes need to grab and orientate for the splitter. The splitter splits in a known size and orientation but then pushes it onto a conveyor that bulk manages it and again it's randomised. Conveyor unloads into a truck, bucket or ground again randomising and increasing volume.
Take out the randomising, maintain control of the pack. Allows for a number of selling options that cost nothing after the initial material handling fix and allows for added value.
100%
Could you please tell me where you got your Pinosa FAM500 and how much it cost?
I have 2 wood burners and the regular wood is way too small for my wood burners. I would have those 16 inch rounds split in half and that's it. Wood that is cut so small is like burning paper or cardboard. It burns fast and hot but you are constantly feeding which means you have work through a lot of wood. I have 10 cords of wood on my property that I have to work through because it's cut very thin and it will burn fast. I bought some oak rounds and had those delivered and I will split those myself with an axe and sledgehammer. The combination of both worked well for me last year and that's why I'll do it again this year.
hi there real nice machine , best to all john
That's amazing !! What's the price?
Nothing will make kindling or mini firewood faster or more efficient than this machine. Ive seen other producers have a conveyor frim the processor with 2-4 people doing resplits grabbing the bigger junks and splitting them down then back onto the conveyor up into a truck, or kiln baskets. Less labor is key to making more profit tho
Matt, is there any way to save labor and funnel those rounds once cut into the X splitter? The manual labor to move rounds at around the 11:24 mark seems like an opportunity to minimize touches/labor on the product?
We are working on it currently. We were just getting going with it in the video and figuring out it's speed and what should be done to improve the process.
It seems to me like it would make more sense, rather than buying a whole new machine, to simply run the firewood from the processes over a large gap screen. The wood that falls through is good, the wood that doesn't needs to be resplit. Seems like quite a luxury to be running 2 machines
cool machine .,.,small firewood tho.,.,.,Tkzz for sharing.,.,.,peace