You're a Driven person. I love to see you promoting a product which is not everyone's cup of tea. In Europe they're rare. I would like to give it a shot and experience this two wheel driven bike.
This is great, and perfect timing! Mine puked a good amount on the ride back to Cleveland from your way. Changed out the gear oil again and still have a slight bit of seepage. Will give this a go. Cheers.
I ford deep water and play in the muck regularly with my 2010. Not sure how that bellows would survive off-road and rubbing the 2WD selector rod. I use a plastic barb fitting in the dipstick hole and a length of clear tygon tubing run up and tucked behind the rear taillight support. For about $6 in parts I know the FD is venting to atmosphere, not sucking water and no bellows to get knocked off/damaged.
On my 2019 gear up I removed the vent, put some sealer on a set screw and sealed of the hole. I ordered a dipstick with a vent from Ural and installed it. Went on a 100 mile ride with a passenger and averaged 60mph during the trip. No leaks where the set screw was and nothing working out any seals.
@@kyleklintok7730 Ural of New England has it. I don't have the part number, but the name of the part is (Final Drive Dipstick and Breather). Bought one from them a few weeks ago.
You're a Driven person. I love to see you promoting a product which is not everyone's cup of tea.
In Europe they're rare.
I would like to give it a shot and experience this two wheel driven bike.
Very clever! Better than running a tube up the frame. I like it - thanks for the info!
This is why you are loved. Thank you guy again.
Ingenius, can we order this from you? Love the urban camo too
This is great, and perfect timing! Mine puked a good amount on the ride back to Cleveland from your way. Changed out the gear oil again and still have a slight bit of seepage. Will give this a go. Cheers.
I ford deep water and play in the muck regularly with my 2010. Not sure how that bellows would survive off-road and rubbing the 2WD selector rod.
I use a plastic barb fitting in the dipstick hole and a length of clear tygon tubing run up and tucked behind the rear taillight support.
For about $6 in parts I know the FD is venting to atmosphere, not sucking water and no bellows to get knocked off/damaged.
Hi guys you don’t have the right tools
Body
Thank u , nice
Actually, it should be up to the manufacturer to correct design flaws, not the consumer.
On my 2019 gear up I removed the vent, put some sealer on a set screw and sealed of the hole. I ordered a dipstick with a vent from Ural and installed it. Went on a 100 mile ride with a passenger and averaged 60mph during the trip. No leaks where the set screw was and nothing working out any seals.
If you don't mind, what is the part # of that dipstick? If it's meant for the Ural I wonder why it just isn't factory utilized?
@@kyleklintok7730 Ural of New England has it. I don't have the part number, but the name of the part is (Final Drive Dipstick and Breather). Bought one from them a few weeks ago.
Ну и что и для чего это?
Чтоб маслом не ссал. По сути можно просто шлангу колечком на раме закрепить.