Cruise control would be good I got the Indicator stalk but I’m not that good on a pc probably do something wrong end up costing me money good video that keep then coming buddy 👍🏻
i done it its easy. just watch couple of op-com vedios and do it mate. my car is 2013 but i use 2009 profile to update mine... program in IPC and CIM and Engine that is it..
very good video compared to other videos very easy to understand voice ynu dont talk too fast you tale time to explain well dooe i liked and suscribed looking forward to more please. i got a old 53reg corsa c 1.0 petrol with intermittant ecu fault non start replaced engine ecu bcm dash chip etc got to recode modules so they talk tn each other please can you tell me eactly which suppliei on ebay for vaux com and soft ware money tight at present know some software u/s i got to get it wright first time woukd reallly appreciate any help advice very Grateful many thanks Dean / mid wales.
hello Zedalonus, you look quite expert on Op-com. I did a mess with an Op-com and maybe you Can help me, please? I was searching the menu for the body control because I have a minor problem since months with the confort of the right side windows. I don't know what I have touched on the Op-com software but when I tried to start the car, it didn't. The Op-com was still attached. I thought that the battery was maybe low because I was navigating inside the car with the Op-com since a certain time. I insisted and finally the car turned difficulty on, but the motor had a strange behaviour: it looks like it can not have enough carburant or air, if I push on the pedal it doesn't respond as it should, I don't have any power ! Before the car had any faults codes, now it shows "P1526 (8) throttle position no adaption-present" and P1550 (4) electronic throttle control power management-present. What I have done ? Thank you in advance for your help.
Hi mate having a real problem with my op com it just refuses to install a driver keep getting an error, not sure what to do, are you able to send me a copy of your driver? Thanks.
Google 'Twintop Roof Repairs' - Dennis in Manchester and Darrin in Banbury are the experts on Twintop roofs. Also get on the Facebook group 'Astra Twintop Owners' - very helpful people on there.
Hiya mate, I've got a bit of a problem with mine. Some assistance would be massively appreciated. So I installed it the software and all that jazz and when it comes to diagnostics it tells me The interface ain't powered by the car. I'm not sure if I installed the drivers right which is confusing me alot. When i click update driver, do I update it by choosing it to be the one that came with the software? I've done that and still got the same problem. The thing us I have the 2010 version of OP com and that works perfectly.
@@zedalon Thanks for replying. I have got someone experience with these for the past 5 years coming in to do a fresh install of it. But yeah, it does come up as serial converter. Thanks anyways
hi mate do you have copy of 2014 version? i have 2014 version but not responding to my zafira 2013. i use 2010 version to program my car. but i want to use 2014 version becuase my car is 2013 zafira. if you can tell any tricks how to run 2014 will appreciate
I think I have it but need to check, I'm not sure why it doesn't work on your car 🤔 I take the adaptor passes the test in the settings be won't talk to you car.
@@zedalon yaa i did use 2014 version driver but it i get interface communication error when i use 2014 version. but with same driver i can use 2010(first version) not 2012 or 14.
Hi there, thanks for the video, what version of opcom (the thing u put in the opd) is that? and where should i can buy the right software? :D i have since yesterday a astra H twintop 2006, 1.6 petrol
I purchased a device with software on eBay. The software was full of viruses and would not work. Can you let people know where you purchased your software from, so I can get something that works. Thanks.
I purchase the adaptor and software separately on eBay and didnt have any issues. I will have look in my purchase history to see if I can find the software seller.
Thank you for this great video. I got opcom so this introduction is what I needed :)
Glad it was helpful!
Good explanation!!Thanks
On your list of cars do you have the insignia from 09 - onwards? Thanks
Cruise control would be good I got the Indicator stalk but I’m not that good on a pc probably do something wrong end up costing me money good video that keep then coming buddy 👍🏻
i done it its easy. just watch couple of op-com vedios and do it mate. my car is 2013 but i use 2009 profile to update mine... program in IPC and CIM and Engine that is it..
Good Video!!!
Thanks for the video!
hi. do you know will that work on antara reg 2015? or do i need newer opcom?
Thank you nice and clear
Your more than welcome
very good video compared to other videos very easy to understand voice ynu dont talk too fast you tale time to explain well dooe i liked and suscribed looking forward to more please. i got a old 53reg corsa c 1.0 petrol with intermittant ecu fault non start replaced engine ecu bcm dash chip etc got to recode modules so they talk tn each other please can you tell me eactly which suppliei on ebay for vaux com and soft ware money tight at present know some software u/s i got to get it wright first time woukd reallly appreciate any help advice very Grateful many thanks Dean / mid wales.
Hi ya, Just check eBay for the adaptor most come with the software. But if you find one with the software here a link to the software.
As for the starting issues there is a known fault with the CIM modules that means to key doesn't always get read correctly.
good video, but do you have instructions on how to change an injector on a astra 1.3 cdti z13 dth engine and recode it with op-com
No sorry as I only have 1.4 xep
Nice laptop.
hello Zedalonus, you look quite expert on Op-com. I did a mess with an Op-com and maybe you Can help me, please? I was searching the menu for the body control because I have a minor problem since months with the confort of the right side windows. I don't know what I have touched on the Op-com software but when I tried to start the car, it didn't. The Op-com was still attached. I thought that the battery was maybe low because I was navigating inside the car with the Op-com since a certain time. I insisted and finally the car turned difficulty on, but the motor had a strange behaviour: it looks like it can not have enough carburant or air, if I push on the pedal it doesn't respond as it should, I don't have any power ! Before the car had any faults codes, now it shows "P1526 (8) throttle position no adaption-present" and P1550 (4) electronic throttle control power management-present. What I have done ? Thank you in advance for your help.
Have u figured it out already ?
Hi mate having a real problem with my op com it just refuses to install a driver keep getting an error, not sure what to do, are you able to send me a copy of your driver? Thanks.
Will it work for roof fault finding of Astra twintop MK5 2008
Google 'Twintop Roof Repairs' - Dennis in Manchester and Darrin in Banbury are the experts on Twintop roofs. Also get on the Facebook group 'Astra Twintop Owners' - very helpful people on there.
Hiya mate,
I've got a bit of a problem with mine. Some assistance would be massively appreciated. So I installed it the software and all that jazz and when it comes to diagnostics it tells me The interface ain't powered by the car. I'm not sure if I installed the drivers right which is confusing me alot. When i click update driver, do I update it by choosing it to be the one that came with the software? I've done that and still got the same problem. The thing us I have the 2010 version of OP com and that works perfectly.
Hi has as the adapter installed as a serial converter?
@@zedalon Thanks for replying. I have got someone experience with these for the past 5 years coming in to do a fresh install of it. But yeah, it does come up as serial converter. Thanks anyways
@@FaizanA-mh4pd i had this issue when i first got my op-com it turned out the usb wire was damaged.
Hi.good video, but what to do when you get a ECU does not respond message back
bro i have 1.99 and downgrade to 1.39 but now i want to back 1.99 but i dont know how can you say hiw can i do that?
hi mate do you have copy of 2014 version? i have 2014 version but not responding to my zafira 2013. i use 2010 version to program my car. but i want to use 2014 version becuase my car is 2013 zafira. if you can tell any tricks how to run 2014 will appreciate
I think I have it but need to check, I'm not sure why it doesn't work on your car 🤔 I take the adaptor passes the test in the settings be won't talk to you car.
@@zedalon yaa i did use 2014 version driver but it i get interface communication error when i use 2014 version. but with same driver i can use 2010(first version) not 2012 or 14.
Hi there, thanks for the video, what version of opcom (the thing u put in the opd) is that?
and where should i can buy the right software? :D
i have since yesterday a astra H twintop 2006, 1.6 petrol
Did you get it?
@@dernfi8329 i got some software yeah. it worked for me at the astra from 2006.
Hi will this pick up problems with pressure sensor glow plugs
I believe it should
@@zedalon thank u for the reply
mine dont accept security code just waiting like 20 minutes to check security code. whats wrong?
What version of Windows you using?
I purchased a device with software on eBay. The software was full of viruses and would not work. Can you let people know where you purchased your software from, so I can get something that works. Thanks.
I purchase the adaptor and software separately on eBay and didnt have any issues. I will have look in my purchase history to see if I can find the software seller.
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F303275184252
do you need a car pass password for the software to work. tia
You can do code reads and clearing but yes you well need car pass to access most modules to make changes to programing
Oh dear, no warnings that you can easily brick your car with this gadget.
Can IT Show injection
Can you be a bit more specific?
@@zedalon can it show if the nozzles inject fuel properly and iS IT OPCOM 2016? THANKS
I think it might show that info in the engine ECU measuring block menus but don't hold me to that and it is the 2014 version
That is what she said 😂😂😂😂😂