Restoration integrated stereo amplifier DENON // Restore details of each step

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 130

  • @gregorall9779
    @gregorall9779 10 місяців тому +7

    Just when I thought electronic repair was a thing of the past, I see a younger generation with skills to spare. Thank you, young man, for proving that it's not a forgotten craft.

  • @Poppinwheeeeellllllieeeeez
    @Poppinwheeeeellllllieeeeez Рік тому +15

    How Hakko has not sponsored you with a vacuum pump and soldering station is a huge missed opportunity for them. You are a magician with the trigger gun iron. Love watching your videos. Great skill.

    • @davidhamm5626
      @davidhamm5626 11 місяців тому +1

      I have never used a suction pump, can you just use the one tip for every connection ?

  • @B-Doy
    @B-Doy 6 місяців тому

    ต้องขอชื่นชมนะครับ ว่าเก่งมาก ๆ ซ่อมให้กลับมาใช้งานได้ แถมยังรื้อประกอบใหม่ทุกชิ้น คุณเป็นคนที่ทำงานเยี่ยมมาก ใส่ใจทุกรายละเอียด เก่งจริง ๆ ครับ

  • @rogersteigleman4785
    @rogersteigleman4785 2 місяці тому +1

    What. An. Excellent. Job. Of. Restoration. Keep. Up. The. Good. Work.

  • @johankamarudin5155
    @johankamarudin5155 Рік тому +1

    I am using this amp right now. One of the best denon amp so far.

  • @dek_tegar100
    @dek_tegar100 Рік тому +3

    Fans you from indonesia always support your channel

  • @tinesdof5837
    @tinesdof5837 Рік тому +2

    About electronics, you're the man,

  • @beinjar5634
    @beinjar5634 5 місяців тому +1

    I appreciate and respect your knowledge you’re the best 🙏🏼

  • @Kirill_Maker
    @Kirill_Maker Рік тому +3

    Well nice reverse video as usual ;)

  • @Web_Audio_Moto
    @Web_Audio_Moto Рік тому +10

    The equipment you restore is always so badly damaged - where does this stuff come from? Great work!

  • @michaelrosenberg2420
    @michaelrosenberg2420 Рік тому +1

    Touching up cold solder joints...nice touch

  • @DavidLassman-p8m
    @DavidLassman-p8m Рік тому +8

    38:12 What happened to the original Mr. Electricity? You can tell by his hands he's a different gentleman.

    • @ayuarif3093
      @ayuarif3093 Рік тому

      Whre uncle

    • @paulmichaelfreedman8334
      @paulmichaelfreedman8334 6 місяців тому

      That's because these guys are getting paid peanuts to repair all this old crap. They don't get to keep anything themselves. The guy who earns money with the videos isn't even in the videos. It's an industry.

  • @marianroco5642
    @marianroco5642 Рік тому +1

    Maestro,respect and succes

  • @DennisEhv
    @DennisEhv Рік тому +4

    Good that you have recorded how you get it apart. So you can watch it how to put it together again 😅

  • @13091975daniel
    @13091975daniel Рік тому +3

    Super!!!

  • @SMP8503
    @SMP8503 7 місяців тому

    Great Job. Well Done👍

  • @zaidshamsi5844
    @zaidshamsi5844 Рік тому +2

    Good work sir😊

  • @dab9742
    @dab9742 10 місяців тому +1

    30:48 You'd be better off soldering, rather than wraping like that, because to me, this kind of connection is risky. Well done for the rescue ! 😉

  • @ULAT_BULU89
    @ULAT_BULU89 4 місяці тому

    I admire you, because I am the same as you, my hobby is the same as your brother..

  • @RigasRadioRupnica
    @RigasRadioRupnica Рік тому +1

    *С У П Е Р* 🔥👍🏻

  • @toihavan9515
    @toihavan9515 Рік тому +1

    Thợ rất giỏi

  • @mustapha007
    @mustapha007 Рік тому +2

    Like fROm MorOcCo🇲🇦🇲🇦

  • @yvesvandensande5032
    @yvesvandensande5032 7 місяців тому

    il est préferable de refaire les montages en wrapping avec la méthode et l'outil adaptés afin d'eviter de mauvais raccords futurs. Beau travail !

  • @WilsonSoares
    @WilsonSoares Рік тому +3

    Good times when things were built to last!

  • @DanAkins-sd4ig
    @DanAkins-sd4ig 11 місяців тому

    Cool😊

  • @miguelcardenasmario4142
    @miguelcardenasmario4142 11 місяців тому

    Genial amigo !!!!😊

  • @tylowe78
    @tylowe78 Рік тому

    That song must be their favorite song.

  • @MarlinKayiser
    @MarlinKayiser 7 місяців тому

    Fantastic work done would have liked to see DC offset adjustments done amp is old

  • @paulfellows2094
    @paulfellows2094 11 місяців тому +1

    i have a denon amp av surround receiver avr 1802 works great , you do a fantastic job you have plenty of skill and talent keep doing thing great work love the video

  • @DoBaTu34
    @DoBaTu34 10 місяців тому

    a ở HD phải không? giỏi thế

  • @aliemlek
    @aliemlek Рік тому +1

    👍👍👌👌

  • @TransTehService
    @TransTehService Рік тому +2

    скоро начнут с помощь одного омметра и паяльника спутники чинить 🙂

  • @denisdube8893
    @denisdube8893 7 місяців тому

    Wow

  • @cesarbeta8
    @cesarbeta8 8 місяців тому

    👍

  • @carlogeir.8171
    @carlogeir.8171 Рік тому +4

    Every time I see one of these videos I wonder.
    Why do I have an osiloscope, function generator, soldering station, very precise multimeters, capacitor meters, if with a brush, a multimeter pen, paint and a little solvent I can fix it? Those videos are very funny.😂😂😂😂

  • @EvgTiakaExT
    @EvgTiakaExT Рік тому +5

    Прозвонка транса: тыкаем рандомно по проводам, если стрелка зашкалит, то значит обмотка целая. Какая индуктивность, какое двуполярное питание-вы что, все работает.
    Повальная прозвонка всего и вся, нет предварительной проверки подачи частоты и замер осциллографом.
    Видос больше смахивает на ложь.

    • @Mr_Flybacker
      @Mr_Flybacker Рік тому +1

      Особенно "порадовало" как он там провода распушённые на стойки накрутил в стиле "и так сойдёт!". Ложь и есть.

    • @АлександрЛомовой
      @АлександрЛомовой Рік тому +1

      Что наша жизнь? Игра! И люди в ней актеры. У. Шекспир. А Станиславский говорил -"Не верю!"🤣🤣🤣.

  • @mohammadmidanikechist6379
    @mohammadmidanikechist6379 Рік тому +5

    What is this liquid with which you clean the electronic board?

  • @lipkosnejev1634
    @lipkosnejev1634 Рік тому

    Отремонтировано неплохо, только ржавые входные RCA-шки портят впечатление.

  • @karimdora3252
    @karimdora3252 11 місяців тому +1

    what fluid are you using for clean up the platines?

  • @nasraroshan7875
    @nasraroshan7875 3 місяці тому

    Nice, but I never use drill for screwing or unscrewing the electronic devices like this. It can damage the threads.

  • @Thanhvo27070
    @Thanhvo27070 Рік тому

    Ngon luôn 10 củ ngay 😅

  • @kangheru2546
    @kangheru2546 Рік тому +2

    may know, what liquid do you use for cleaning?

  • @carlogeir.8171
    @carlogeir.8171 Рік тому

    NASA is now sending this man to repair its electronic boards.🤪🤣🤣🤣

  • @bogdantylec719
    @bogdantylec719 10 місяців тому

    The power amplifier transistors and integrated circuits were checked by Smurf Panjandrum. Why omitted? Interesting.

  • @triplexdread
    @triplexdread Рік тому +1

    not sure just winnding the wires back around the posts without soldering them is a good idea but heyho

    • @bsb0011
      @bsb0011 11 місяців тому +1

      I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.

  • @oturanboga6225
    @oturanboga6225 3 місяці тому

  • @litoboy5
    @litoboy5 Рік тому

    Denon

  • @Kirill_Maker
    @Kirill_Maker Рік тому +1

    You really believe that those old winding for wires will work ok? They should be done with fresh tined wires and some tension on those!

    • @bsb0011
      @bsb0011 11 місяців тому

      I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.

  • @ThomasWinders
    @ThomasWinders 7 місяців тому

    Please forgive my dumb question but... why do they have wires wrapped around poles instead of connectors?

    • @beinjar5634
      @beinjar5634 5 місяців тому

      Good question, that really shocked me

  • @pentagono9192
    @pentagono9192 Рік тому

    Que liquido usa para lavar las tarjetas 🤔

  • @avva4184
    @avva4184 Рік тому

    Hello and thank you for this excellent video, out of simple curiosity why some wires are not soldered but can be wound?

    • @davidhamm5626
      @davidhamm5626 11 місяців тому +2

      The post connection methods have been used in area where vibrations can happen, like telephone switch boxes, older television chassis. And some of MY solder joints are, not always great !

  • @FrankoReynolds
    @FrankoReynolds 2 місяці тому +1

    THERE'S THAT SONG AGAIN

  • @chris_hertford
    @chris_hertford Рік тому +1

    What were you doing twisting the wires around the posts? Just solder for permanent connection, such a hazard!

    • @bsb0011
      @bsb0011 11 місяців тому

      I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.

  • @davedrew9328
    @davedrew9328 Рік тому +4

    I don’t understand why you had to take so much of it apart ?

    • @davidhamm5626
      @davidhamm5626 Рік тому +1

      You have to find where the fault is, and if there are more than one...

    • @2000striezel
      @2000striezel Рік тому

      @@davidhamm5626 But that's not the way to repair elektronics. How many hours you need to apart the aplifier. For this money such method of repairing costs, you get a new one.

    • @davidhamm5626
      @davidhamm5626 Рік тому +1

      @@2000striezel Having an understanding of how capacitors, resistors, chokes, transformers, voltage and current works, is a skill that is fading fast.
      One of my hobbies is tube equipment, mostly radios. Many times you have to remove parts to test them, so I see what he is doing as normal. Plus , "they" do not always make NEW versions of what you have.!

    • @janinapalmer8368
      @janinapalmer8368 Рік тому

      What model number is this amplifier ...

  • @shin2.
    @shin2. Рік тому

    日本のヤフオクに、いいの売ってるよ

  • @carlogeir.8171
    @carlogeir.8171 Рік тому +1

    The Chinese believe that a high-end amplifier can be repaired just like a clothes iron.😂😂😂😂😂😂

  • @warunakangara6791
    @warunakangara6791 Рік тому

    Perfect, can you try to make back side panel with instructions for 100% renovations

    • @davidhamm5626
      @davidhamm5626 Рік тому

      The panel is there,what do you think is missing?

  • @cavini225
    @cavini225 5 місяців тому

    05:53 Denon use this type of connection?

  • @nitroboy2
    @nitroboy2 11 місяців тому

    those wires of transformer and speaker are very dangerous , u need to solder them not wrap arround post . its not good

  • @dothuc4336
    @dothuc4336 Рік тому

    Gì mà hỏi không thèm trả lời thế! Tôi muốn nhờ bạn đóng cho tôi chiếc thùng loa mà thấy bạn làm trên UA-cam nhà bạn ở Hải Dương nhà tôi ở Hưng yên cũng gần mà nhờ bạn làm bạn không thấy trả lời!

    • @hungngo31
      @hungngo31 Рік тому

      Nhắn tin vào đây cho e

    • @dothuc4336
      @dothuc4336 Рік тому

      @@hungngo31 mình có đôi thùng loa adwan nó bị mối ăn mất 1 chiếc mình nhờ bạn đóng dùm cho mình một chiếc khác giống chiếc kia được không? Được thì cho mình địa chỉ mình gửi đến chỗ bạn làm giúp cho mình!

    • @hungngo31
      @hungngo31 Рік тому

      Gửi sdt e gọi

  • @DJBERT12
    @DJBERT12 Рік тому +3

    Gościu kurwa ty się na elektronice znasz jak ja na balecie

    • @puciohenzap891
      @puciohenzap891 Рік тому

      Ale kasa z jutjuba sie zgadza, chuj tam ze te naprawy to fejki.

    • @Robertrrteam
      @Robertrrteam Рік тому

      Dawno nie widziałem tak gównianej roboty :)

  • @jellybelly2234
    @jellybelly2234 10 місяців тому +2

    Nobody want's an amplifier with a damaged faceplate like this...Maybe still useful as a party amp or something.

  • @jmans4928
    @jmans4928 Рік тому

    How an equipment like that get into that condition?, too much money over there.

  • @СергейСтоляров-ж6в
    @СергейСтоляров-ж6в 3 місяці тому

    Зачем ты варистор поменял на конденсатор

  • @davidng5187
    @davidng5187 6 місяців тому

    我可以联络你吗?有要事商量謝·谢再会巴!

  • @MdSayed-vh9es
    @MdSayed-vh9es Рік тому

    Jotil

  • @digitalonlineservice90
    @digitalonlineservice90 Рік тому

    chona ba tho

  • @2000striezel
    @2000striezel Рік тому +1

    Das ist kein Techniker, höchstens 1 Ohm Meter Messer.

  • @AndyArbeloa-hg2ww
    @AndyArbeloa-hg2ww Рік тому

    Give me 1 unit power amfli

  • @delfincaranto3715
    @delfincaranto3715 Рік тому

    location mo boss

  • @davey6024
    @davey6024 Рік тому +1

    Use a stiff toothbrush, not a pick.

    • @davidhamm5626
      @davidhamm5626 Рік тому

      Use it to do what?

    • @davey6024
      @davey6024 Рік тому

      @@davidhamm5626 To clean dingleberrys out your Cornhole my man

    • @davidhamm5626
      @davidhamm5626 Рік тому

      @@davey6024 The reason that they are called "dingleberries" , is that it is skewed version of dangle,which places them outside.

  • @edselexie5761
    @edselexie5761 Рік тому

    Chinese copied this already and marketed across asia then they restored and using the original.

  • @javimirage
    @javimirage Рік тому

    Yes and No !!

  • @redking7051
    @redking7051 Рік тому +2

    Lot of lag in the video again. What is happening with your editing software 😂😂😂

  • @jonathonvanmeter4893
    @jonathonvanmeter4893 Рік тому +1

    Not so sure about this being real. If you’re doing the work, why not record every single part of the process? Sure, it would make a long video, but would be more convincing it’s all real and not faked.

    • @davidhamm5626
      @davidhamm5626 Рік тому +2

      How would you fake a video like this, ?

    • @cat09tails22
      @cat09tails22 Рік тому +3

      Not so sure you actually wrote the entire comment above, why not include a full video so we can watch you typing it ??

    • @davidhamm5626
      @davidhamm5626 11 місяців тому +2

      @@cat09tails22 I can get behind that idea.....

    • @puciohenzap891
      @puciohenzap891 11 місяців тому +2

      @@davidhamm5626 They are notorious for doing it - simply reverse it. Take a working amp, film it and the teardown, then take it outside for a week and repeat.

    • @davidhamm5626
      @davidhamm5626 11 місяців тому

      @@puciohenzap891 Okay, it seems like a lot of work to trick the small amount of people that watch theses....

  • @DirkRieuwers
    @DirkRieuwers 9 місяців тому +1

    Please use the proper tools. This is delicate equipment. This is not a good example. Your solder iron i.e. looks like the thing we use to iron our shirts. With all due respect....

  • @carlogeir.8171
    @carlogeir.8171 Рік тому

    😂😂😂😂😂😂 Cambia un termistor por un condensador. 🤣🤣🤣🤣🤣

  • @SaleBosk
    @SaleBosk Рік тому +1

    to litle cooling paste, spraying colour directly without primer and nice finish, not so fine detailed work

    • @davidhamm5626
      @davidhamm5626 Рік тому

      You do not need a lot of cooling paste, too much inhibits heat transfer, I learned that when I was adding CPU's to motherboards.

  • @ВладимирРодионов-ж2л

    Где ты откапываешь столько аппаратов

  • @CREPOZOIDES.LE.MORBIDES
    @CREPOZOIDES.LE.MORBIDES Рік тому +1

  • @YEHUDAKALO
    @YEHUDAKALO Рік тому

    I will cancel my subscription if you dont answer questions.
    Like , what kind of cleaning liqued you use

    • @elderman638
      @elderman638 Рік тому +1

      the liquid is IPA. Dont wait answers from them

    • @tubical71
      @tubical71 3 місяці тому

      this is klickbait only. He doesn't know anything. this is filmed partial, heavy edit and reverse replay... no repair but entirely destroy....

    • @Arie19560902
      @Arie19560902 Місяць тому

      Water en afwasmiddel omdat het zo goedkoop mogelijk moet.

  • @DIMAS_MR
    @DIMAS_MR Рік тому

    For me, I've wanted the amplifier since I was little but I don't have any money at all. If you want to send it online, I'll give you the address, thank you😥

  • @orlandojazm3534
    @orlandojazm3534 11 місяців тому

    🤨😬🤔🧰😅Creo que desarmar a veces es más fácil que ensamblar🎛️🎚️🕵️😁😄