I am a native of Trivandrum, Kerala. I am using Bryston, Plinius and Pioneer vintage stereo amps with Sonus faber speakers. I am much satisfied with your style of work. Thank you.
Bro, I am a regular viewer of your videos and all are very very useful for a person like me to learn more and more about AVRs in detail. Currently I am residing in Canada, nobody try to fix electronics here as the service charge is very high. Also the used receivers are extremely cheap like you can find a good receiver from around 1500Rs. I bought an Onkyo tx-nr 616, Polk 10" powered sub woofer, Polk tower speakers(with 4 drivers) only for 6000Rs last year. Used receivers are that much cheap here. Due to my keen interest in the audio systems even from the childhood, I am trying to be good as much as I can to make the receivers back to its life mainly as a passion. Most of your videos gives some critical answers to my questions. But still have some left. May I ask you a doubt if you don't mind? How much is the temperature that you are setting while installing a new DSP chip? When I go through the datasheet, it says the maximum operating temp is about 85 degC. Are you using a low melting point solder? Hope you will reply. Sorry for the long message Thank you sir
hi deepu3100, its true what u have mentioned about used receiver are very low price , and maximum they all sell by betting not fixed price. but in India nowadays lots of scam's going in this used avr selling . many people don't search or don't have enough idea about buying used receivers. and operating temp is ic can able to work upto 85 deg in circuit after that it blown that meens . they mentioned about max working temperature. but they dont mentioned about ic install temperature u can set your blower to air speed 4 and set temp at 390 deg to take the ic out. and don't use blower for placing ic back use soldering iron method solder it back.
@@fixavreceiver thank you so much for your time to give such a detailed reply Mr. Balaji. Really appreciated.... I have got a Yamaha receiver, when I warm up the DSP chip I get sound and no sound when it gets cooled. Then I applied the flux and heated to 300 degC with the SMD station, after that the IC got internal short and started drawing excessive current. That's why I asked to clear my doubt. Are you still using the same 390 degC on blower while soldering the bottom ground pad on the new Chip before soldering the pins with regular iron? Thanks again.
@@fixavreceiver thank you so much for your effort to share what you know from your experience. Expecting more and more videos and wishing you for a great success in your business. To be frank, even it is in your videos I am getting higher heart rates and seems very curious when you are going to switch on the receivers for first time after your service. I feel that unexplainable feeling when I see it is working.... Good luck brother Would be perfect if you could correct the spelling of "receiver" on your multi meter
All your videos are very informative & easy to understand brother. I'm from Malaysia. Thank you My friend got a Onkyo TX-RZ740 want to sell to me and the issue is hdmi stopped working but RCA & digital are working great. Sent for repair at local guy but they said unable to repair/no parts. I'm thinking of buying it at a discounted price and repair it if its not the hdmi processor issue. From your experience, what/which chip could be the problem? Could it be the processor? And also, do u have TX-RZ740 service manual/schematic?
hello sir ... i have onkyo receiver and it has dsp problem disply not showing dsp logo and doesnt change dsp mode but if i touch SDRAM address inputs pin with my finger then dsp working perfectly what is the problem tha Dsp problem or SdRam problem??
Bro assembly amly player broblem ah irukku athula remote kit fault la irukku nenga atten pannuvingala.....remote kit on aguthu but songs play agala.... Stand by mode le irukku...... Intha broblem neenga atten pannuvingala..... Nan eppudi ungala contact pandrathu ......🤝🤝
મને તમારી ભાષા સમજ માં નથી આવતી . અને આટલી મહેનતે બનાવેલો તમારો વિડિયો અગર હિન્દી ભાષા માં હોત તો દેશ ના અન્ય નાગરિકો ને કેટલો ઉપયોગી થાય . મારે પણ મારા હોમ થિયેટર માં આવો જ પ્રોબ્લેમ આવ્યો છે . માટે તમારો વિડિયો જોયો. Nice video. this language is Gujarati.
Hi.this is good and informative video.i am facing same issue i have yamaha rxv 671.my unit is also not showing logo of speakers and no sound. My DSP IC NO. IC 921 DSP D70YE101BRF101.i am looking for this IC can you manage me.i am ready to pay you.pl share your payment details. Thanks
வணக்கம் மலேசியாவில் வாங்கிய R x v 475 ஆம் பவர் ஆன் ஆகமல் இருக்கு சிகப்பு லைட் மட்டும் எரியுது ஆம் பவர் சுட்ச்ச ஆலுத்துனா சில விணாடி ஆமந்து ஆமந்து எரியுது நின்றுது என்ன பன்றது நான் பரமக்குடியில் இருந்து
HTR 6130 YAMAHA இந்த ரிசிவரில் சவுண்ட் அதிகப்படுத்தும் போதுoff ஆகிவிடும் இந்த நிலையில் தான் Yamaha service center ரில் கொடுத்தேன் ஒரு மாதம் கழித்து உதிரி பாகங்கள் கிடைக்கவில்லை என்று என்னிடம் கொடுத்தார் ஆனால் இப்போது ரிசிவர் on ஆகவில்லை இதைப் சரிசெய்து தரமுடியுமா
I am a native of Trivandrum, Kerala. I am using Bryston, Plinius and Pioneer vintage stereo amps with Sonus faber speakers. I am much satisfied with your style of work. Thank you.
Thanks for sharing
சிறப்பான தனித்துவமான வேலை.... திறமையான உழைப்பு இந்த தனித்திறனை ஆர்வம் விடாமுயற்சி உள்ளவர்களை வளர்த்து விடுங்கள் உள்ள பேர் நிலைத்திருக்கும்.....
Thank you
I like the trick with the kapton on the underside to hold the smd components in place when / if their solder melts.
Leader, your work is excellent👍👍👍
Super brother arumai sema enna talented person wow🙏🏼🙏🏼🙏🏼🙏🏼😀😀👌👌👌👌👏👏👏👏👏👏
Thank you 😊
Your work is excellent 👍👍👍
Neet work and neet presentation 👌
Thank you friend
Class work bro 👍
Thank you
Excellent explanation
My receiver is Model HTR 3063,
Please, where can I get the chip for the HTR 3063 model?
Great job your work explanation super thanks bro
Thank you
Keep rocking.iam always support to you sir
Super bro, ur great
Excellent Troubleshooting
Bro,
I am a regular viewer of your videos and all are very very useful for a person like me to learn more and more about AVRs in detail. Currently I am residing in Canada, nobody try to fix electronics here as the service charge is very high. Also the used receivers are extremely cheap like you can find a good receiver from around 1500Rs.
I bought an Onkyo tx-nr 616, Polk 10" powered sub woofer, Polk tower speakers(with 4 drivers) only for 6000Rs last year.
Used receivers are that much cheap here.
Due to my keen interest in the audio systems even from the childhood, I am trying to be good as much as I can to make the receivers back to its life mainly as a passion.
Most of your videos gives some critical answers to my questions. But still have some left.
May I ask you a doubt if you don't mind?
How much is the temperature that you are setting while installing a new DSP chip?
When I go through the datasheet, it says the maximum operating temp is about 85 degC.
Are you using a low melting point solder?
Hope you will reply.
Sorry for the long message
Thank you sir
hi deepu3100, its true what u have mentioned about used receiver are very low price , and maximum they all sell by betting not fixed price. but in India nowadays lots of scam's going in this used avr selling . many people don't search or don't have enough idea about buying used receivers.
and operating temp is ic can able to work upto 85 deg in circuit after that it blown
that meens . they mentioned about max working temperature.
but they dont mentioned about ic install temperature u can set your blower to air speed 4 and set temp at 390 deg to take the ic out.
and don't use blower for placing ic back use soldering iron method solder it back.
@@fixavreceiver thank you so much for your time to give such a detailed reply Mr. Balaji. Really appreciated....
I have got a Yamaha receiver, when I warm up the DSP chip I get sound and no sound when it gets cooled. Then I applied the flux and heated to 300 degC with the SMD station, after that the IC got internal short and started drawing excessive current. That's why I asked to clear my doubt.
Are you still using the same 390 degC on blower while soldering the bottom ground pad on the new Chip before soldering the pins with regular iron?
Thanks again.
yes sometimes 425 degree also required based on the IC Size and pins types
@@fixavreceiver thank you so much for your effort to share what you know from your experience. Expecting more and more videos and wishing you for a great success in your business.
To be frank, even it is in your videos I am getting higher heart rates and seems very curious when you are going to switch on the receivers for first time after your service. I feel that unexplainable feeling when I see it is working....
Good luck brother
Would be perfect if you could correct the spelling of "receiver" on your multi meter
very nice Bro, wishes from Kanmalai Electronics...
Thank you very much
No
9943124215
Well explanation.great effort work.
Thank u ❣️
Where can buy ic to replace for my yamaha same model, im from philippines and i'm wacthing your video
Hi, i bought it from Yamaha authorised service centre
Thanks for the video. Great work ,👌one question, what's the voltage at the DTS IC output after the repair?
As per service manual
Sirr
Bro there are so many mode which mode for Dolby and DTS surround sound please tell me ❤️
all modes working in 5.1 and each mode sound slightly different . bassed on your room setup u can use suitable mode
All your videos are very informative & easy to understand brother. I'm from Malaysia. Thank you
My friend got a Onkyo TX-RZ740 want to sell to me and the issue is hdmi stopped working but RCA & digital are working great. Sent for repair at local guy but they said unable to repair/no parts.
I'm thinking of buying it at a discounted price and repair it if its not the hdmi processor issue. From your experience, what/which chip could be the problem? Could it be the processor?
And also, do u have TX-RZ740 service manual/schematic?
no bro, but i try to get it.
@@fixavreceiver Thank you bro. Will wait for an update. BTW, regarding the issue I mentioned above, could it be the processor?
I suspect hdmi processor ic and it's surrounding smd components
Please share ic part no and image i will try to arrange
Excellent work sir
Thank you 😊 bro
அருமை அண்ணா
👍
I am from Sri Lanka
Super bro
Anna nan maharaja 4 fet mono la +- mathi kuduthutan board is not work how to repair
Good experience 👍 perfect ok
Thank u for supporting me
Bro top 5 avr solluga bro ethu best aaa irrukum under 25k
Bro I will post one video about it soon
@@fixavreceiver ok quickly post bro
அருமை
Nice bro, you are great
Thank u bro 💗🙏
Also I seen some yello sticker used for coverage components,what for this
its a kapton tape . heat resistant tape to protect for surrounding components
@@fixavreceiver ok
Sir my htr-2064 same problem no one is making in mumbai please can you repair it so I can parcel you
Please whats app me.
Boss which oscilloscope did you using please tell with model
Hantek
Model number please
9943124215-please whatsapp me
Sir from where do you get the IC ?
Is ZFX-3 DSP IC available with you?
Currently No stock
@@fixavreceiver ok sir inform me if it is available on stock, I'm ready to pay extra if you have😉
Sir my avr rxv665 7.2 last time I talk you for no sound issue so dts ic replacement you tell me so it is available ic
Please share IC no
Audio issue as what you show in video... Tell how to repair that... Or can you repair and make it work..
Bro ennoda yamaha rx v371 ellam work aguthu but hdmi arc out mattum work aga mateanguthu bro fix panna mudiyuma??
Did u tried firmware update and factory reset
@@fixavreceiver I don't know about firmware bro, my remote broken bro that's y, but I reset the receiver....but no hdmi out
Please chat with me in whatsapp 9943124215
Nanba entha dts ic eppadi vanguve
Sir 8ohms connected amp very heat show display diagnostic mod speaker wire checked it enables problm
Please share images or video in whatsapp
Stereo amp one channel hum noice. When put hand on top cover or moving around amp. What problem bro.
Gnd connection issues
hello sir ... i have onkyo receiver and it has dsp problem disply not showing dsp logo and doesnt change dsp mode but if i touch SDRAM address inputs pin with my finger then dsp working perfectly what is the problem tha Dsp problem or SdRam problem??
ram and crystal
@@fixavreceiver thanks sir
super bro nice work
hi bro , how mush cost this type repair. my denon amp also same problem.
Please chat with me in whatsapp
Good job,
A question where did you get that particular piece? Where did you buy it? I need to buy that piece.....
Chaina
@@fixavreceiver any particular web site to order? I am from Sri Lanka. Thanks in advance.
Alibaba
Bro assembly amly player broblem ah irukku athula remote kit fault la irukku nenga atten pannuvingala.....remote kit on aguthu but songs play agala.... Stand by mode le irukku...... Intha broblem neenga atten pannuvingala..... Nan eppudi ungala contact pandrathu ......🤝🤝
9943124215
Annaa
Old Denon 2200 avr la bluetooth port set panalama ........????
don't add or alter anything use separate Bluetooth Module ,use via aux mode
Sony stk m55 mutaki
Amp
Nan vangi ullen
Okva anna
Onum prachana
Varathulana
Pls
Ok , adu nalla model and eduvum problem varadu
ரொம்ப நன்றி அண்ணா எனக்கு ரொம்ப குழப்பமா இருந்தது அதுதான் உங்களுக்கு கேட்டேன்
உங்க வாட்ஸப் நம்பர எனக்கு கொஞ்சம் அனுப்புங்க நான் உங்களோட ரசிகன் ஆயிட்ட நா ரொம்ப சூப்பரா வேலை பாக்குறீங்க
Good,hard job bro
Thank for appreciate my work
Excellent bro
Thank u 😊
good job👍🏻
Thank u bro 😊
Please me phone number.my phone no;9688115958.
Sir Yamaha RX v 675 no sound icons displayed on screen and no sound coming
Hi brother i have yamaha RX-V377 internal error issue how can i fix
check hdmi voltage section and bios ic
thanks for uploading bro
Thank u
Intha chip ic's ellame enge kadekkum ?
i am importing from forign
@@fixavreceiver
Appidinna neenga sollamaattinge...
Bro, please understand I buy from many sellers for different types of IC and components , so please share the ic no and I tell u the seller details
I have the same - no sound issue .. probably the same DTS IC. please assist..i will courier. need address.
મને તમારી ભાષા સમજ માં નથી આવતી . અને આટલી મહેનતે બનાવેલો તમારો વિડિયો અગર હિન્દી ભાષા માં હોત તો દેશ ના અન્ય નાગરિકો ને કેટલો ઉપયોગી થાય .
મારે પણ મારા હોમ થિયેટર માં આવો જ પ્રોબ્લેમ આવ્યો છે .
માટે તમારો વિડિયો જોયો. Nice video. this language is Gujarati.
thanks , i am trying to upload subtitle asap.
Bro second hand 7.1 Atmos amplifier kedikuma
Sorry this is service center, no sales
Call me8838667567
Super Bro ❤️❤️❤️
Thank u bro ☺️
Macha super 👍
Thank u
Good work
Thank you sir
Great
Where is the shop place?
Vellore
@@fixavreceiver ok thanks if any enquiry I call
Ok
Hello sir,
Well talented and good knowledge about avr and stereo amp. Keep it up. How do contact you. D u have any contact📞.
9943124215-please whatsapp me
@@fixavreceiver hello sir
Hi 👋
@@fixavreceiver tried to contact u by whatsApp. But unable.
Why bro I am not receiving any calls
Bro andha chip cost evlo bro enakum venum
Super 👍👍👍👍👌👌👌👌
Thanks
Hi.this is good and informative video.i am facing same issue i have yamaha rxv 671.my unit is also not showing logo of speakers and no sound.
My DSP IC NO. IC 921 DSP D70YE101BRF101.i am looking for this IC can you manage me.i am ready to pay you.pl share your payment details.
Thanks
Please ping me on whatsapp
Pl provide your WhatsApp number
Thanks
Got it thanks
Hi
Same issue for my yamaha home theater
Wow nice
👍☺️
வணக்கம் மலேசியாவில் வாங்கிய R x v 475 ஆம் பவர் ஆன் ஆகமல் இருக்கு சிகப்பு லைட் மட்டும் எரியுது ஆம் பவர் சுட்ச்ச ஆலுத்துனா சில விணாடி ஆமந்து ஆமந்து எரியுது நின்றுது என்ன பன்றது நான் பரமக்குடியில் இருந்து
Ok please check 12&15 requlator IC
Illana enkita anupunga nan sari pani tharen
9943124215-whatsapp also same
Bro sale panreengala
iIlla Bro only service
IC Part Number : TMS320D70YE101BRFP by Texas Instruments
👏🏻👏🏻👏🏻👍👍
HTR 6130 YAMAHA இந்த ரிசிவரில் சவுண்ட் அதிகப்படுத்தும் போதுoff ஆகிவிடும் இந்த நிலையில் தான் Yamaha service center ரில் கொடுத்தேன் ஒரு மாதம் கழித்து உதிரி பாகங்கள் கிடைக்கவில்லை என்று என்னிடம் கொடுத்தார் ஆனால் இப்போது ரிசிவர் on ஆகவில்லை இதைப் சரிசெய்து தரமுடியுமா
please share all details in whatsapp- required images of your amp inside and outside
Superb sir....
Sir cost of Oscilloscope please
18k
@@fixavreceiver and sir cost of that dts ic please
Due to high demand current price is 2800/piece
But in normal time it's price just 1600₹ bro. Now they raised price
Super Sir
Thank u
How much u charge for this
Service charge:₹1500+ spares
Bro unga no venum bro technics equalizer problem irukku bro
9943124215-whatsapp also same
💕super pro super hot working 💕
👍
5.1 amp pandracanga romba irukkange...
Aana AV receiver service pandravange kedaikkurath romba kashtham...
Eppidi neenga ithallame kathu kittinge ?
bro i tell u when i am free
Which item used for removing ic
Hot air blower
Super
Thanks ji
Dsp ic getting overheat,also no sound no speaker icon also unable to check test tone. What should I do? Plz reply
Hi, seems like ic failed and shorted internally , so replace the IC it will work
@@fixavreceiver what is the cost to replace the dsp ic?
₹2500
Excelente
Nanga oder panna Entha ic ayachu tharuvingala
maximum nan try panni taren bro
please share IC NO
TMS320D70YE101BRFP
This same ic bro plz give me
Marantz audio output not working service
please ping me in whatsapp
Good
Pi0neer 933 just 8 ohm speakers match akuma sir .
Match ஆகும்
Unga place enga bro
Vellore, tamilnadu
I need Soldering iron name sir
Hako
Unga video ellame super bro unga WhatsApp number kidakkuma
9943124215
Bro how to contact you....?
Please contact me at 9943124215-or whatsapp me
Assemble a player Aster 5.1 remote kit fault mobile number
address please
Sir sony 5.1home theater no sound please contact no sir Addresses please
Vellore, tamilnadu. 9943124215- whatsapp also same
Hi
hi
How to contact you
Please contact me at 9943124215 whatsapp also same
👌🙋
Thank u ji
Shop address pls
Vellore tamilnadu, for full address please whatsapp me
Aster remote kids sarees Panorama
Enna achchi
Boss , he was asking you to repair his locally assembled amplifier used Aster remote kit. (I think this remote kit has HDMI & S/PDIF ports).
Yes I already spoken to him
Thanks for responding
Yamaha Rx-467
ok what happen to your amp
Audio not output
Ok, whatsapp me at 9943124215
Hii
Hi, bro thanks for your support
மொபைல் நம்பர்
9943124215-whatsapp also same
Sir u namper kuduga sir
9943124215-whatsapp also same
Contact please
9943124215-whatsapp also same