but when I set my drag brake to 100% it says “warning” high drag brake can cause the esc to over heat…what do u suggest? I can go to 50% before it gives me that warning.
I'm happy with it how it runs. I think this setup would be even smoother in something with more gear reduction, this thing is geared pretty high. I can do jumps with it on 2s! It's got some speed.
Another thing about doing the calibrate for the throttle I Heard a Voice saying make sure that you go full-throttle then neutral pause for a second and then go full reverse
Thank you, I had planned to do it differently. I wanted to have the app being operated on video, but camera focal length and lighting were killing it and it just didn't look good so I resorted to screen shots!
@@snörre23 The truck in the video runs an SCX24 transmission and FCX24 Axles so it doesn't have the benefits of the worm gears and its pretty over geared for a crawler. So this programming was intended to improve the crawl ability of this set-up! Thanks for watching!
Maybe its because i have overdrive in the front…. But in a super slow crawl, my rig cogs and jerks slightly on flat ground. Iv tried so much in the app to fine tune it and it hasnt changed. Great video tho man!
Depending on how much overdrive, and if your driving on higher traction surfaces the drive train will definitely bind a little loading the motor up. You could take the front drive shafts out and drive it on a flat surface to see if that's the culprit. Thanks for watching!
Yeah that's crazy hi lizard bro is older than this video he come at 2.17 third newest firmware and you're saying yours is a 2.9 that's like super old right
My Lizard Pro came with version 2.9 installed but the drag brake didn't work. I changed to version 2.7 and the drag brake became functional. Then looking at the list of firmware 2.9 is nowhere to be found! 2.7 in the newest available in the app for me.
The newest is like 2.23 or something like that. I was fooled in the beginning thinking that 2.9 was newer than 2.23 (reasonable since it’s a higher number) but the number after the . is apparently a straight count. Going with the actual latest firmware solved all my problems
@@havikhobbies The V1 have a 3 mode setting near the top left, its a Low Med and High. Calibrate on med :) if you calibrate on low, then use high... its insane and vice versa.
@@havikhobbies Oh man I dont know, maybe set it up on the normal transmitter and then rebind?, but all that matter is if you can get that slow crawl. if so then you may not need to do that.
I'm pretty happy with it now with the settings as shown in this video. I've got great control over the low end and heaps of wheel speed at the top end! This thing is amazing out on the rocks!
What transmitter are you using? Maybe something accidentally adjusted on transmitter? Have you tried resetting to default settings on esc? Maybe try a different esc firmware?
@havikhobbies I'm using the spectrum slt3 and sr315 reciver. I have tried different firmware and all the settings on the remote. My buddy has the same problem with a similar setup too.
@havikhobbies a little more in reverse I get like 82%. We both have almost the same setup just different receivers. And only 2 firmware updates for the unity pro. Same as the python pro just a 2 in 1 combo I believe.
Thank you sir testing this right now. Just got a mini Komodo and this thing was bogging down or clogging w.e the terminology is. Couldn’t wrap my head around it was checking for binding and it still was doing it under load or no load with tires off. Now that I down graded software and used yours settings I’m running test
Sounds like you're on the right track, I hope that will smooth things out for you. You can still get a little cogging when the esc is out of FOC and operating in regular sensorless brushless mode, especially under load/in a bind. You need to adopt a different driving style compared to brushed motors. Let me know if your successful! Thanks for watching!
Dude thank you so much !!! I just copied your settings for my UTB18 Komodo and it fixed my slow crawl cogging !! 🙏
@@High_strung_rc Hey that's awesome, glad you were able to get things running smoothly! Thanks for watching 👍
but when I set my drag brake to 100% it says “warning” high drag brake can cause the esc to over heat…what do u suggest? I can go to 50% before it gives me that warning.
That's one clean rig. Very well put together
Thank you!
Good stuff bro. Looks like you got her pretty dialed.
I'm happy with it how it runs. I think this setup would be even smoother in something with more gear reduction, this thing is geared pretty high. I can do jumps with it on 2s! It's got some speed.
Thanks for this information. Great set up and a treat to see your rig!!
Glad you found the video helpful! I love that rig, it's a beast. I really need to do a break down of it since I got it fully completed.
Another thing about doing the calibrate for the throttle I Heard a Voice saying make sure that you go full-throttle then neutral pause for a second and then go full reverse
Yes definitely calibrate the throttle to make sure you get full forward and reverse power! Super easy process in the app!
Wo, I want a Slayer build soooo bad... Yours looks so slick!
Thanks mate, I love my Slayer build! Its a beast.
You did great on this video
Thank you, I had planned to do it differently. I wanted to have the app being operated on video, but camera focal length and lighting were killing it and it just didn't look good so I resorted to screen shots!
Why do you need drag brake on a SCX24 with worm gears ? I have mine on zero following several videos and tutorials. Also have the brake on 30.
@@snörre23 The truck in the video runs an SCX24 transmission and FCX24 Axles so it doesn't have the benefits of the worm gears and its pretty over geared for a crawler. So this programming was intended to improve the crawl ability of this set-up! Thanks for watching!
@@havikhobbies I was wondering but could not see.
Freaking Awsome build!
Man furitek so nice.
If I do any thing else 1/24 I’m building one of these.
Thanks man, My goal with this build was to put together something completely killer! I think I succeeded!
Thank you for sharing this video!!! Extremely helpful!😉
No problem mate, glad the video was useful 👍 Thanks for hanging out!
Maybe its because i have overdrive in the front…. But in a super slow crawl, my rig cogs and jerks slightly on flat ground. Iv tried so much in the app to fine tune it and it hasnt changed. Great video tho man!
Depending on how much overdrive, and if your driving on higher traction surfaces the drive train will definitely bind a little loading the motor up. You could take the front drive shafts out and drive it on a flat surface to see if that's the culprit. Thanks for watching!
I have my slow crawl set to like 60 70% my punch is at like 5 I think and it's beautiful
I might give those settings a try! Thanks.
Yeah that's crazy hi lizard bro is older than this video he come at 2.17 third newest firmware and you're saying yours is a 2.9 that's like super old right
My Lizard Pro came with version 2.9 installed but the drag brake didn't work. I changed to version 2.7 and the drag brake became functional. Then looking at the list of firmware 2.9 is nowhere to be found! 2.7 in the newest available in the app for me.
The newest is like 2.23 or something like that. I was fooled in the beginning thinking that 2.9 was newer than 2.23 (reasonable since it’s a higher number) but the number after the . is apparently a straight count. Going with the actual latest firmware solved all my problems
@gregerledung1449 Yeah that's odd, I just assumed higher number was newer firmware. I do like Furitek and it's app but the app is somewhat glitchy.
very helpful thanks
@@johndeesfpv9289 No problem mate!
Calibrate it on Med setting on the controller. Then use it on low setting after that. its unreal!
I need all the help I can get with these things! What setting on the controller are you referring too?
@@havikhobbies The V1 have a 3 mode setting near the top left, its a Low Med and High. Calibrate on med :) if you calibrate on low, then use high... its insane and vice versa.
@@DurpVonFronz Yes that makes sense, I'm using a cheap Turbo Racing P32 Transmitter so not sure I could replicate that setting?
@@havikhobbies Oh man I dont know, maybe set it up on the normal transmitter and then rebind?, but all that matter is if you can get that slow crawl. if so then you may not need to do that.
I'm pretty happy with it now with the settings as shown in this video. I've got great control over the low end and heaps of wheel speed at the top end! This thing is amazing out on the rocks!
I'm only getting 79% trottle and I can't figure it out. O have messed with everything in the app and on the remote. Please help 🙏 😊
What transmitter are you using? Maybe something accidentally adjusted on transmitter? Have you tried resetting to default settings on esc? Maybe try a different esc firmware?
@havikhobbies I'm using the spectrum slt3 and sr315 reciver. I have tried different firmware and all the settings on the remote. My buddy has the same problem with a similar setup too.
Does it allow you to get 100 percent throttle in reverse?
@havikhobbies a little more in reverse I get like 82%. We both have almost the same setup just different receivers. And only 2 firmware updates for the unity pro. Same as the python pro just a 2 in 1 combo I believe.
@@ricerneon399 Have you tried calibrating the throttle again in the app? Also make sure throttle limit switch is set to 100% before recalibration.
Thank you sir testing this right now. Just got a mini Komodo and this thing was bogging down or clogging w.e the terminology is. Couldn’t wrap my head around it was checking for binding and it still was doing it under load or no load with tires off. Now that I down graded software and used yours settings I’m running test
Sounds like you're on the right track, I hope that will smooth things out for you. You can still get a little cogging when the esc is out of FOC and operating in regular sensorless brushless mode, especially under load/in a bind. You need to adopt a different driving style compared to brushed motors. Let me know if your successful! Thanks for watching!