Mercedes ML Steering Wheel Hard to Turn
Вставка
- Опубліковано 6 лют 2025
- This Mercedes ML W164 came to our shop , with the complain of stiff / hard to turn steering wheel . After a lot of struggle diagnosing and understanding the problem of this SUV , we finally find the problem and fix it .
Fault code stored in the ESP module :
5994 Y10 ( SPS Solenoid valve ) : Electrical fault
5981 Y10 ( SPS Solenoid valve ) : Electrical fault
5980 Y10 ( SPS Solenoid valve ) : Electrical fault
PML Speed Sensitive Power steering
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK
Many thanks for the video!!!
It was very useful to me too.
I have stiff steering too and replaced the valve with a second hand one ( original price is about 350 euro ).
Now the steering is much much more lighter.
I have measured the solenoid resistance and it was like yours abt 8.5 Ohms but turns out that the solenoid was faulty.
I do made the same Star diagnosis but really could not realize what F3 and F4 were for.
The steering was getting lighter when switching between F3/4 as per instructions but this did not help much.
So, for the ones who are hesitating...if you have no leaks from the steering rack and nose from the pump go for the valve - most probably its the faulty part.
I'm wondering if this is the same with my ml. I have stiff steering and i can hear the pump making a loud noise. Does this mean my pump is faulty or should i just change this part?
Thank u! Thank u! A huge help for me too. I had the same problem, i bought an aftermarket solenoid from ebay (60$ instead of 400$ original) and its solved my hard steering problem. You are the best!
Huge help to me to find the problem with low speed heavy steering ... thank you
thank you for the effort of speaking English
i understand how you think
that two in one video 😀
Hello, I also have the problem of a stiff steering wheel. It happened after changing the shock absorbers and stabilizer bars. But my question is whether the Mercedes Benz GLK 280 also has this solenoid. I have not been able to find information about it.
Здрасти! С новия клапан когато въртиш волана променят ли се показанията при консумацията? Имаме подобен проблем
Appreciate it- does the 2000 55 AMG have that steering solenoid valve ? Or is the valve located on the power steering - pump?
здравейте виждам че сте компетентни каде се намираъе благодаря
Could it be a PWM signal? I'm sure if you measure it with a oscilloscope you will see the right signal. Because you supplied it with 12V (100% PWM) the valve has been fully open. I think the valve sticks and does not work it is suppose to be... hope that helps ;)
Sir sorry to say that ..which valve u did check ..pls little more details
The valve should return signal to abs module. When it fails the abs module shuts signal to it. Test is just with entering esp abs by scan tool then it gets very soft; this is sign of failing solenoid.
where is the location of this valve?
Hey thank you for the very informative video. On the highway a stone has hit my y10 valve on my w164. I got a new one from another car but when I tried to replace it, I noticed that the whole wiring was pulled (right from the abs module plug)... So in short I don't even see the pins in there anymore. I watched this video a few times and figured out that the diagnostic tool was suggesting unplugging the ABS module and checking pins 44 (minus) and 13 (plus) for resistance (between 5 and 12 ohm). Can you please tell me if those are the pins? Would be very helpful before I fry something as I need to rewire it back and the only thing I have left was a cracked valve and no traces of any green+brown and brown wires all the way into the ABS plug. Thanks a lot!!!
Great video, but as my trade school teacher told me, a test light is ONLY used for checking lights, not electronics
The problem is always the same, copper coils with hairline cracks or with normal cracks.
IS THERE A WAY TO CHECK DIRECTLY TO SEE IF THE SOLENOID IS WORKING
What is the name of the software you are using on your notebook?
Много благодаря.
Hi there, the steering on my W204 got stuck all of a sudden, upon inspection I found that the cable leading to the valve on steering gearbox is broken. Is this possible for the steering to get stiff suddenly bcoz of this?? Thanks
If the cable is broken , this will be the reason for sure
@@crank3646 Thanks for replying
@@crank3646 MB service confirmed it was the cable which caused the issue. 👍got it replaced.
При мен воланът е лесен за завъртане в началото когато запаля колата и в последствие става тежък.
Много добре, но всичко е боза,което говорите.Къде ви е българския?
Can you give me the valve code?
Благодаря братко!
so are you changed the SPS solonoid valve or what
Yes i changed it and that fixed the car .
P.S sorry for the bad english
@@crank3646 Hi Abdullah, how much is the cost for change the pump ? I have same problems plus probably my battery is also gone. Please help me with issues and let me know if I can come to your garage. Regards. Abdul Mannan
He replaced the SPS solenoid with a Mercedes OEM part, not aftermarket.
ahhh dale... no entiendo una goma lo del scanner
Още ли си с Hantek скоуп или ъпгрейдна?
Все още :( Доста се двоумя между picoscope и осцилоскопите на TiePie . Ама везните почват сериозно да клонят към второто , защото имат много богата база данни за европейските коли .
на твоём родном было бы понятней )) так что в итоге я не понял ты клапан поменял или что то ещё ?
Hi. Today i changed the valve but is the same. On cold steering is normall . When is get warmer Its get hard steering wheel. Only i still don't clean the faulty on computer that will try at Monday , but if not that i don't know what to do anymore. We also change before this steering pump, now install new valve. What is next
Depends on the steering pump brand . Is it OEM ? We have installed aftermarket pumps which had similar problems . After installing OEM ones , the problem were solved . The best way , in my opinion , is to take the car to a hydraulic technician to take a look on the problem .
@@crank3646 The pump is Meyle and this valve is Aftermarket also. I don't know its really hard to find a real problem
Hey Ivan i have the same problem if you. Did you find a solution?
@@szymonek24 yes. I change again the steering pump. Meyle was bad. But still steering is not soo easy
@@ivanv8560 Hi Ivan, how much is the cost for change the Completed as requested. Checked belt, rollers and drive found ok. No issues to report at the moment, cleaned the section. pump ? Please let me know. Regards. Mannan
Брат говори на български ве .. нищо не ти се разбира с този английски
Kak davi namerim ? İmam podoben problem s w210
И аз имам такъв проблем..Къде работите?
Може ли някякъв номер за връзка
Здравейте! В детайлите на видеото, има координати за връзка
Ребята, такая же проблема на w251. Можете объяснить , что нужно конкретно сделать. Я не совсем понял. Заранее спасибо
Я думал вы русские.
Може ли контакт с вас?
Здравейте!
Под всяко видео има координати за връзка с нас
Have no idea what the hell you are saying
learn english my friend