LowLows & More..we thank you for demonstrating our SEALS in your video..we stand BEHIND our products...and as always...STAY UP...STAY STRONG...and LOWRIDE FOREVER!!!
I suggest always using bearing grease to grease up the seals when you're installing them that way they have no chance of ripping as you're putting the bolts on.
I would like to see the presto Hi pump head working install it in a lowrider so i can see how fast it is @ 48V, do these pump heads produce a lot of pressure?
What happens if you put the rubber seal down first and then the plastic inside I noticed on my Marzocchi that’s how it looks like it came I’ve been blowing the bacc seal never the front after 5 or 6 up and down taps of the switch bled lines same problem every time
Quick ? I bought them presto hi #9 gears to replace my old ones on my pumps they were fenner gears I was told they are a lot small they are bolted down to the block with 2 bolts I can hold them the same with 2 or we I have to use 4 bolts
The E-seals are a 2parter per..... 1rubber(black) & 1 plastic(white,red,pink, etc.) Would be nice to actually see in detail on how you actually set them. Jus sayin. I remember my 1st gear pump i did i had the seals backwards 🤣🥳
LowLows & More..we thank you for demonstrating our SEALS in your video..we stand BEHIND our products...and as always...STAY UP...STAY STRONG...and LOWRIDE FOREVER!!!
I suggest always using bearing grease to grease up the seals when you're installing them that way they have no chance of ripping as you're putting the bolts on.
Just came up on your channel, like what your doing homey. You now have a new scriber.
Thank you
Do the gears double as impalers for the fluid?
How you know when the gear is bad
I live in Vancouver i just bought a 9# thunder gear head i was watching your video of to replace shaft seal but it doesn't look the same
I would like to see the presto Hi pump head working install it in a lowrider so i can see how fast it is @ 48V, do these pump heads produce a lot of pressure?
What happens if you put the rubber seal down first and then the plastic inside I noticed on my Marzocchi that’s how it looks like it came I’ve been blowing the bacc seal never the front after 5 or 6 up and down taps of the switch bled lines same problem every time
Quick ? I bought them presto hi #9 gears to replace my old ones on my pumps they were fenner gears I was told they are a lot small they are bolted down to the block with 2 bolts I can hold them the same with 2 or we I have to use 4 bolts
In my opinion presto hi gears are garbage, it is ok that 2 bolts hold it on.
The E-seals are a 2parter per..... 1rubber(black) & 1 plastic(white,red,pink, etc.)
Would be nice to actually see in detail on how you actually set them. Jus sayin. I remember my 1st gear pump i did i had the seals backwards 🤣🥳
What’s your opinion of the high presto gear for a lay n play set up on 48 volts. Want to get #9 gears.
Is IS6 Rockford a #9? Thanks
Yes
Thanks for your help. I appreciate all that your doing.
My pump wont build pressure. Has oil
Is the O ring between the block and the gear in good shape? How old is your gear? Did you bleed your lines?
LowLows & More! Same here got new shaft seal but nothing
@@NUNNIE103 how about the ORing that sits between the gear and the block?
LowLows & More! I’ll go get all new seals and try to change than all out to see
I swap pump out .
Who sells #5 gears?