Я такой себе купил взамен старого, называется усиленный ВОМ, там ещё рабочая лента шире, ну и хвостовик меняется под разный шлиц без демонтажа всего ВОМа.
Hi! How are you ? thank you very much for your videos! they have helped me a lot! I wanted to ask you if it is possible for you to make a video indicating how the changes are made, since I don't quite understand how they are done. From already thank you very much
Здравствуйте, хорошо и красиво восстанавливаете свой трактор, может я что-то пропустил, так понял у вас открутилась гайка хвостовика, вы ее назад поставили или нет, и от чего она открутилась?
Just on and off lever + under the seat there is a lever where you can completely turn off the PTO (the whole PTO assembly inside the gearbox) from turning.
Damn fine videos you are putting out, i have been wathching the belarus projekt for a while and i am starting to wonder if belarus is extreeme poor quality or if your machine is abused for a long time before your ownership?
That's the thing. I don't know anything about that tractor :).. And I learn the hard way, buying an old junk I have to repair all the time. But in the end I am quite happy, I gain some valuable lessons and get to know the hardware on all the aspects. And they still produce the same tractor today so I am quite comfortable around them now.. I used to be afraid of big hardware and repairing them..
hrz4x4 The transmission gear reducer keeps jumping out of low gear on mine . I have adjusted the linkage but no help... did this ever happen to yours? I don't want to take the cab off and split tractor.
I have a friend who's 9-th gear will not stay in after gearbox rebuild. He has developed a special way to hold his feet when driving, it's quit funny. He has a problem in the gear lever selectors, you can open that up without breaking the tractor apart. But you have to remove the cab floor to get to the selector cover.
The only problem here was that the previous owner didn't change the gearbox oil.The oil has to be changed because these tractors have a non synchronized gearbox so there is a lot of grinding inside and as a result you get steel shavings in oil.And I mean alot of steel particles,I have the same tractor and I have seen that with my own eyes.Those particles get into bearings and wear them out as well as every other spinning assembly.You see how black and gunky everything is.That means the oil wasn't changed,probably never until it got to you.If the oil is changed properly these pto assembly's last forever
how often are you changing your oil every spring in 🇨🇦 we have to watch for the condensation building up so much in the casing that starts mixing with the oil and turning it milky
Скажите пожалуйста у меня перестал работать вом после снятия коробки до ремонта вом работал ленты крутили не помогло в промежутке 1000 500 переключаются может что то с рычагом который под сидением ?
@@vladnevaikin6730 Возможно, что он находится в нейтральном положении. Всегда разумно выключать ВОМ оттуда, когда вы его не используете. Тогда все подшипники в ВОМ не будут вращаться.
Ребят у меня новый трактор 89.2 на касылка работаю что то с вом не так сил нето и оборот не так как раньше и ленту тоже поменял все делал как положено все равно что то не так помогите пожалуйста
Belarusi nõrk koht ongi jõuvõtuvõll tavaliselt. Farmi omadel pidi aastas ikka mõned korrad jõuvõtuvõlli laiali võtma. Kitsad pidurilindid kulusid ka jube kähku läbi, siis läksid laiad peale need kestsid vähe kauem.
Tere. Hea vaadata kudas asjad peaksid olema. Mul mure ja ei leia viga. Mtz82 ei hoia haaratsit üleval. Sai vahetatud silinder ja jagaja aga ikka kukub alla. Lukustiga suudab hoida. Oskad selle kohta midagi öelda? Oleks tänulik.
@@hrz4x4 Peaks jah. Käis Maaritsas remondis. Peale seda ei jõudnud midagi tõsta ja vajub. Pump vahetati seal ise vahetasin silindri ja jagaja aga ei midagi. Vahetati ka õli anum. Äkki see mustust täis ja nüüd süsteemis mingid tükid ees.
@@jaanusventsel281 hydrol on filter seal õli anuma peal. see lahti võtta ,siis on näha mis kollid seal sees elavad (kui elavad). miks seda anumat üldse vahetama peaks, see ju suur malmist kolakas.
Kui ma oskaks öelda. Nende meestega pole midagi teha. Käivad üle Eesti remintimas ja huiamas. Antsin iseg uued filtrid neile. Kui jagajat vahetasin tuli sealt lõpus tõkatit.
That tractor must have done some crazy PTO stuff back in the soviet times.. I saw your videos. The brake stuff is quite complicated on the zetor, you have to open up quite a lot to get to the brakes.
@@hrz4x4 how did you put the screws inside? There are no threads in those wholes by my Traktor. I can see that too later at your movie, that yours neither. Could you contact me in order to explain that? I guess you should put nuts from inside side? I don't understand how you did it. Some previous commenters under this clip had this same problem. Explain please.
+Constantine Mikhaylov Эти ребята с Прибалтики, как я понял, любой б/ушный трактор продвинутых марок у них не проблема купить по адекватным ценам, да ещё и государство поддержит
Es ist immer wieder schön, die Möglichkeit zu haben um zulernen!! Dankeschön für deine Hilfe 😅
Идеальный ремонт. Красава!
Дай ВаМ Бог здоровья и успехов, лучшее, что посмотрел
Хидоят 126
Panie majster chylam czoło.
I like the comment about having long arms!! :-) My knuckles drag on the ground when I walk!! :-) Well done! Good video!
Лучше новую взборе купить,а так спосибо хороши человек мастер .
ʼ
Хароший мастер
Rulavoi
У новых МТЗ уже хорошо сделано что хвостовик можно менять отдельно, вроде бы 8 болтиков открутил и поставил новый.
Я такой себе купил взамен старого, называется усиленный ВОМ, там ещё рабочая лента шире, ну и хвостовик меняется под разный шлиц без демонтажа всего ВОМа.
Brilliant job as always. You are very good at what you do to maintain and repair these machines.
Thanks
Lewis Younger васуяц.aex
1¹
Hi! How are you ? thank you very much for your videos! they have helped me a lot! I wanted to ask you if it is possible for you to make a video indicating how the changes are made, since I don't quite understand how they are done. From already thank you very much
Класно у вас все получаеться давно смотрю вас так держать!!! Хотел спросить а какой у вас пневмо гайко верт? Заранее спасибо!
Ingersoll Rand 1/2"
@@hrz4x4 спасибо
хорошее видео, спасибо
Браво колега много си добър
Excellent 👌
Класс, молодцы👍👍👍
Здравствуйте, хорошо и красиво восстанавливаете свой трактор, может я что-то пропустил, так понял у вас открутилась гайка хвостовика, вы ее назад поставили или нет, и от чего она открутилась?
Гайка была ослаблена и отсутствовала, когда я купил трактор. Смотрите часть 2 здесь: ua-cam.com/video/x0gBDI5m4gc/v-deo.html
Muy buen trabajo.
Enhorabuena
Is there clutch somewhere when you engage or disengage the PTO from lever or just on and off lever ?
Just on and off lever + under the seat there is a lever where you can completely turn off the PTO (the whole PTO assembly inside the gearbox) from turning.
ciao ho un problema con un mts 82 ha poca forza al cardano mi potresti consigliare cosa fare ti ringrazio in anticipo saluti
at this point that old tractor totally rebuilt lolol👍
Damn fine videos you are putting out, i have been wathching the belarus projekt for a while and i am starting to wonder if belarus is extreeme poor quality or if your machine is abused for a long time before your ownership?
Thank you. It was really abused by the previous owner.. But it has been a nice learning curve.
У меня на вом сальник потек, поменяешь?
Здравствуйте! А колёса задние от чего стоят?
Nice work! You really know your way around these tractors.
I wish you were closer so I could get you to help get mine sorted out...
That's the thing. I don't know anything about that tractor :).. And I learn the hard way, buying an old junk I have to repair all the time. But in the end I am quite happy, I gain some valuable lessons and get to know the hardware on all the aspects. And they still produce the same tractor today so I am quite comfortable around them now.. I used to be afraid of big hardware and repairing them..
hrz4x4
I have a 825 belarus that I bought last year.. I'm learning the same way . Just take it apart.
Those export models (825) are made of better quality parts. So you are quite lucky and I hope you can work more than repair.
hrz4x4
The transmission gear reducer keeps jumping out of low gear on mine . I have adjusted the linkage but no help... did this ever happen to yours? I don't want to take the cab off and split tractor.
I have a friend who's 9-th gear will not stay in after gearbox rebuild. He has developed a special way to hold his feet when driving, it's quit funny. He has a problem in the gear lever selectors, you can open that up without breaking the tractor apart. But you have to remove the cab floor to get to the selector cover.
Very good videos.
How many work hour is in the Belarus? about 20 000 ?
I don't know as the hour meter is broken. Probably around that.
The only problem here was that the previous owner didn't change the gearbox oil.The oil has to be changed because these tractors have a non synchronized gearbox so there is a lot of grinding inside and as a result you get steel shavings in oil.And I mean alot of steel particles,I have the same tractor and I have seen that with my own eyes.Those particles get into bearings and wear them out as well as every other spinning assembly.You see how black and gunky everything is.That means the oil wasn't changed,probably never until it got to you.If the oil is changed properly these pto assembly's last forever
how often are you changing your oil every spring in 🇨🇦 we have to watch for the condensation building up so much in the casing that starts mixing with the oil and turning it milky
@@shawnwright5332 i change it every 2000 hours
How many hours do this tractor has? You are a master by the way
Take care be safe
I don't know. The hour meter is broken and who knows how many decades ago. It has lived a hard life and seen a lot in 30-35 years.
Скажите пожалуйста у меня перестал работать вом после снятия коробки до ремонта вом работал ленты крутили не помогло в промежутке 1000 500 переключаются может что то с рычагом который под сидением ?
540/1000 переключается под коробкой передач трактора. под сиденьем вы можете выбрать вом вкл / выкл и вом с учетом колес
Получается я рычаг под сидением в неправильное положение установил?спасибо.
@@vladnevaikin6730 Возможно, что он находится в нейтральном положении. Всегда разумно выключать ВОМ оттуда, когда вы его не используете. Тогда все подшипники в ВОМ не будут вращаться.
Ребят у меня новый трактор 89.2 на касылка работаю что то с вом не так сил нето и оборот не так как раньше и ленту тоже поменял все делал как положено все равно что то не так помогите пожалуйста
Z czego te czesci z plasteliny ze takie wszystko zawsze zuzyte ?
MTZ 80 có giống như vậy không bạn.
are you thinking about puting turbo kit on your mtz ?
Maybe in the future. I am thinking about hydraulic steering right now.
Какие сальники на хвостовик????
не помню
عمل رائع
How many hours on your belarus ?
9:04 Куда вы там вкручиваете болты ??? На моем МТЗ там нет резьбы!
І я не зрозумів як???
Good Job !!!!!
Belarusi nõrk koht ongi jõuvõtuvõll tavaliselt. Farmi omadel pidi aastas ikka mõned korrad jõuvõtuvõlli laiali võtma. Kitsad pidurilindid kulusid ka jube kähku läbi, siis läksid laiad peale need kestsid vähe kauem.
Võimalik. Mul nii palju kogemust ei ole veel. Ma tean, et linti ei tohi libisema lasta, siis tuleb küll kiiresti remont.
Good day How many hours on this tractor Thanks
Tere. Hea vaadata kudas asjad peaksid olema.
Mul mure ja ei leia viga.
Mtz82 ei hoia haaratsit üleval.
Sai vahetatud silinder ja jagaja aga ikka kukub alla. Lukustiga suudab hoida.
Oskad selle kohta midagi öelda?
Oleks tänulik.
Kui kõik vahetatud, siis peab hoidma. Muidugi need vene jagajad on suhteliselt halva kvaliteediga. Pump on ka vahetatud?
@@hrz4x4
Peaks jah. Käis Maaritsas remondis. Peale seda ei jõudnud midagi tõsta ja vajub. Pump vahetati seal ise vahetasin silindri ja jagaja aga ei midagi. Vahetati ka õli anum. Äkki see mustust täis ja nüüd süsteemis mingid tükid ees.
Maaritsas kaks venda. Traktor läks sinna käigukasti või tagasilla kolinaga. Tagas tuli nii, et kõik töötavad asjad on vigased. Sulid sellised.
@@jaanusventsel281 hydrol on filter seal õli anuma peal. see lahti võtta ,siis on näha mis kollid seal sees elavad (kui elavad). miks seda anumat üldse vahetama peaks, see ju suur malmist kolakas.
Kui ma oskaks öelda. Nende meestega pole midagi teha. Käivad üle Eesti remintimas ja huiamas. Antsin iseg uued filtrid neile. Kui jagajat vahetasin tuli sealt lõpus tõkatit.
Holly f##k thoes pto parts were worn out 😮 . hade the zetor apart this summer changed the clutch and brakes .
That tractor must have done some crazy PTO stuff back in the soviet times.. I saw your videos. The brake stuff is quite complicated on the zetor, you have to open up quite a lot to get to the brakes.
How much did all those parts cost?
I don't know. Just enough to get the tractor going again.
Nice video
Thanks.
Hop so cau sau cua mtz nay mem qua , khong bang do usa duoc
ЬДДЗ ЬЬЬЛЛЩ90Ж0009лщ9ё7ih5đ śŕ4óeŕ ţūūūť 0 auļm
Масло манол заливает а у нас нигрол,😀
do you have UNIOR tools?
Nope. Never heard of Unior.
Слова где ?????!!!!!
Ez egy utálat benne.
7:42-ни хрена себе поодарочек...
Päris karmilt ära kulunud detailid olid.
Üsna lõppenud jah. Huvitav, mis tööd ta küll teinud on, kõvasti ära loksunud. Nüüd on alates mootorist kõik uus ja muretu tunne.
Taas üks kvaliteet video😁
Probably drunk russians!,😀 Greetings from Bulgaria friend!
Video 8:44 bolt 22 ??? 19 ????
If I remember correctly it's M12.
@@hrz4x4 video 8:44
Watsap nomer
@@hrz4x4 how did you put the screws inside? There are no threads in those wholes by my Traktor.
I can see that too later at your movie, that yours neither. Could you contact me in order to explain that?
I guess you should put nuts from inside side? I don't understand how you did it.
Some previous commenters under this clip had this same problem. Explain please.
Ok, I know everything now. The nuts have to be put against the teeth.
Ive watched on Tv and saw everything clearly. Grüsse aus Polen
Унас.очин.жара.45.градус.ми.нгрол.заливаеим.на.задни.моса
🤐👍
I hope this new parts are made of quality steel and not of Belarus potato...
Well i hope so too...
На хрен он тебе сдался этот МТЗ ? Думаю у вас есть возможность купить нормальный трактор или ремонтировать эту рухлядь ваше хобби?
Я воспринимаю это как урок и кривую обучения.
А какой например трактор купить взамен МТЗ 82?
+Constantine Mikhaylov Эти ребята с Прибалтики, как я понял, любой б/ушный трактор продвинутых марок у них не проблема купить по адекватным ценам, да ещё и государство поддержит
😀👍👍👍👍
+
++++++++
👴👴👴
Сможем место вом но 100 ставить