140. Simple DIY - How I replaced my table saw - part 2

This video picks up from where the previous video ended.
I have owned several table saws in my lifetime and I have enjoyed using them. However, now I am in a smaller space surrounded by neighbors so I am much more conscience of the dust and noise a table saw can create. So I started thinking about alternative ways to cut primarily sheet goods.
What I decided to do was revisit using a circular saw along with a cutting guide (that's clamped in place). I have used this combination years ago and was always very happy with the results. What's old is new again so I'm back at it and still very happy with the results.
In this video, I expand a little on the basic idea by building and using a 2-dimensional template to slide the circular saw along to make copies of parts very quickly.
Thanks for taking a look at our video. There are several ways you can help support us for free!
1) Subscribe to our channel and click the notification bell. Doing this notifies you when we release new videos. You can unsubscribe and/or turn off notifications at any time.
2) Watch our videos. We prefer that you watch the entire video however, if you are running short on time or want to speed up the playback of the video, click on "settings" in the UA-cam app and change the "playback speed" to "2" (instead of "normal"). This will double the playback speed. Feel free to experiment with other values.
3) Click the "thumbs up" icon which gives the video a "like". This helps to recommend this video to other like minded people.
4) Leave a comment or ask a question. If you prefer not to leave a public comment (or question), you can email us at [e-mail]. We do our best to reply to all comments and questions.
5) If you know someone that might enjoy this video, please feel free to share it with them.
6) If you have a suggestion for a video, please let us know in either the comments or via email.
7) If you would like more information on any of the products we use, please click the links below. NOTE: This channel is a participant in the Amazon Associate Program. As an Amazon Associate, we earn a small commission on qualifying purchases at no additional cost to you.
Cutting Guide
----------------------
Here's a link to a cutting guide similar to the one shown in the video: amzn.to/2V7tbIf
I have been using Ryobi 18v tools for years; back when they were using NiCad batteries. I was very pleased when they came out with the Lithium Ion batteries because these new batteries worked with my old tools!
I bought 2 Lithium Ion batteries in a tool combo kit which included a drill, impact driver, batteries, and charger. Here's a link to this kind of kit: amzn.to/3xyeefo
The circular saw that I am using is the old saw from the combo kit from the NiCad days. Here's a link to the updated saw (does not include a battery): amzn.to/3Ao9gnk .
I also have a jigsaw ( amzn.to/3AlPKI0 ) and a sander ( amzn.to/3AiXJW4 ).
All of these tools (plus a whole bunch more) use the same battery! I have been very happy with these tools and I recommend them.
For more information about the WEN drill press shown in many of our videos, click the affiliate link below.
amzn.to/30yPSoq .
Also, feel free to check out my review video here: • 86. WEN 10 inch drill ... . I have been using this drill press for quite a while and I recommend it.
Here is a link to my favorite hearing protection ear muffs: amzn.to/2ZiPh8T
I find as I get older, I have less tolerance for loud noises. Whenever I am in my shop using a loud power tool like the BladeRunner or a shop vac, I wear these earmuffs.
Speaking of the BladeRunner, here's a link to learn more about it: amzn.to/2NwuVWZ
Also check out my BladeRunner playlist: • BladeRunner
If you're interested in learning more about LibreCAD, a free and powerful yet easy to use 2D drawing program that we use often, feel free to check out our LibreCAD playlist found here: • LibreCAD . If you are new to LibreCAD, I recommend watching the videos in order as shown on the playlist.
Music:
"Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons...
All video content was written, shot and edited (PowerDirector 17) by Matt Ancona.

[@clemmcguinness1087]

This template idea is really good. Thanks for posting this

[@ImaginethenMake]

You're welcome. Thanks for your comment and for watching.

[@ecowomble1781]

Have you thought about using a sacrificial board underneath you work to cut into rather than raise it it in the air? It seems easier and a bit safer perhaps?

[@ImaginethenMake]

Yes, I have thought about using rigid foam board as a sacrificial board. Unfortunately, I do not have a way to move a 4'x8' sheet of the foam board, I'd need to cut it much smaller to get into my small car for transport. So hopefully, the next time you see me use a circular saw, I'll be using a home made guide (that requires less measuring to use) on top of some sacrificial foam board.
Thanks for your comment and for watching.