Only downside is the lack of memory and no fail safe (more for Nitro), but great budget transmitter. The rechargeable battery capability is a + for me. But the multiple binding is great for additional RCs or project builds since the receivers are value and have 6 channels.
Thanks for the video. But dude, thirteen+ minutes before showing how to do it? For anyone curious. After connecting the receiver, you press the small button on the side of the receiver for three seconds to bind it to the transmitter. You press the same button three times quickly to enable the gyro. There you go, saved you fifteen minutes.
Thankyou. Awesome video. It was exactly what I was looking for. I learned everything I was trying to find out from this one video. Liked and subscribed. Simon. (Australia).
Thanks for watching and for the support🤙! Agreed, these are solid value wheels, especially for 17mm. They sell them with different tire options too. Someone else on here mentioned he had a blowout ~50-60mph, I believe. I haven't had them up to that speed yet, but just a heads up.
@@motorheadaddictions2761 yeah most likely. I added duct tape on the inside before glueing them and now they are as good as hoons wheels. I’m surprised that the rims haven’t cracked even though I had horrible crashes going 68mph. Anyway had a look at your channel and it is awesome. You should have way more subs and views.
@@getsetdrone6921 Very much appreciated 🤙 and great tip on taping the wheels. I'll keep that in mind for future wheels. You're hitting some nice speeds too🤘 Cool peoples like you make this RC community 🤙 thanks again!
Thanks for watching and the support! Agreed, the response and range are great. Best budget tx and rx for electrics. You can pick up a rebrand rbr/c version for cheaper too, if you're good with 4channel. If it had a failsafe, it'd be great for Nitro too and the best.
It's a great transmitter and receiver setup. Awesome response and range and only take 4aa🤙 Can also bind to multiple receivers. I highly recommend picking up extras, ~$10 w/gyro(especially since you have the 6ch.), for your other RCs or future builds.
Sir,can you do a video on how to calibrate a dumbo rc transmitter,mine was not functioning normally,,before,it was normal but when i changed the esc,it mulfunctioned,,thank you
Thanks for the video which exactly reply to one of my two questions of these days. Now that this is clear for me I would like to know if with 2 Dumbo radios can I play with my son together binding two receivers (one for each radio) and have no interference? thanks for help
@@bipantera Sorry, I had missed the question. If I understood correctly, yes multiple RC cars(each programmed to their own DumboRC transmitters) can run at the same time with no interference. This applies for any 2.4ghz Transmitter and receiver.
I'm building a drag car and decided to use my Dumbo radio for it. I bought a second receiver to use. For some reason when I bind it, the steering works fine but when I turn power off to car I lose binding to the esc. Any suggestions?
Are all the channels constantly powered? I hooked up lights to my dumbo an the switches don't turn the lights on or off. They just stay on. But putting on a servo it will work properly
Can I bind a 4ch controller with a 6ch transmitter, I bought 2 6ch not realizing I had the 4 ch controller. I'll order another 6ch controller eventually but to get by can I use the 4ch?
Thanks for watching! Haven't had that issues before but I came across this in a arrma forum. Most mentioned.low battery, but one guys had a servo issue. Otherwise, I'd try reprogramming the Tx. Hope this helps🤙 www.arrmaforum.com/threads/dumborc-transmitter-help.32792/#js-post-452263
Cool video lots of great info. Hey question so, once you bind the TX RX, then you just turn on both and they work together? What about, can I go back and forth between cars. I saw you did maybe but I'm not so sure. Meaning that I could have all my cars on this one receiver with the caveat being, the trims and rates won't save, is this correct? Thanks bro.
Hi, I was just wondering if replacing just x6f reciecer for the one with the gyro would work on my JBL Cheetah. Or do i have to buy x6fg transmitter and reciever combo? Thanks.
Thanks for watching! The gyro will work if you just swap the RX, but you do need the 6ch TX to adjust the gyro sensitivity. Otherwise I'm guessing the default will be on medium setting. The adjustment is channel 6.
Thanks for watching🤙 Yes, the gyro is built into the receiver. So you would get the x6f receiver instead of the x6fg(gyro). These will bind to the DumboRC x4 - x6 transmitters. If you don't need 6ch control, the x4 is a bit cheaper and you can still use ch5 and 6 in the receivers as aux.
@@motorheadaddictions2761 thank you very much I'm building some wpl kits and I'm using dumbo in my 1/10 so id like to keep the controller numbers down!😂😂😂
Thanks for watching! Yes, the TX and Rx have to be the same brand. Note that other companies rebrand this DumboRC set, and they can be paired. Just look at the designs.
Thanks for watching! If it's a dumboRC version TX, yes. Many of the larger ZD racing models and other brands come with the dumboRC TX, some may have other stickers tho. Just look at the ID.
Thanks for watching🤙 hope this helps! I haven't had that issue but read about some that have. Some mentioned low batteries, calibration needed(video on yt for that), or worst case bad servo. Here's a forum link to that one. www.arrmaforum.com/threads/dumborc-transmitter-help.32792/
@@motorheadaddictions2761 Strange enough it stop sometimes. Maybe because i used 2 different receivers? BTW if i have powered up both receivers at the same time the work also at the same time. :)
I think it'll only bind to one, whichever it picks up first. Hope the flashing thing gets resolved, I bet that gets annoying. I run 2 of the 6ch Tx, on for my drift cars and the other for my TCs and SCTs that I run gyros in. Both have a couple RX binded, haven't had any issues yet. Just annoying to reset the trims and settings. My FlySky is good for the memory, but their gryo RX cost much more than the DumboRC
@@motorheadaddictions2761 I am a beginner with RC and like it a much. I need to say that i have official the Surpass Hobby variant. But i has really working that the remote control 2 receivers at the same time after power up. :) And it's a lot better than the stock RC i got by my WPL D12. I now just waiting for a brushless set and accesoires to put it in the WL 124018. I can't wait for it. :)
Sorry I have another question if I don't disturb. The speed limiter is 50/75/100% like spektrum or 0 to 100% potentiometer like WLToys 12428? Can the steering end point be regulated?
No problem. Not sure I understand the question, but I can confirm that the DumboRC has more adjustments (st and throttle trim + st and th rate + rev switch for both) than the Wltoys Transmitter (only steering trim and throttle rate). Trigger sweep is 70%fwd/30%rev. Hope this helps.
@@motorheadaddictions2761 thanks for replying. Questions are two 1) to set the max speed is there a continuous fine tuning like 12428 or step by step like Spektrum (e.g. 25/50/75/100%) anyway it strong brakes with everything setting? Our ECX AXE / BRUTUS at 50% speed (the minimum) have no brakes because they are too weak. 12428 at mid speed the brake brakes! 2) steering end point can be set?
just for fun.............I might attempt this just for fun. I think I will make a comment to this helpful video just for fun. ESC is in just for fun. Now I have bound three vehicles just for fun. Sorry for the cuts in the vide, they were just for......... Sorry I could not resist no hard feelings it is just for fun.
Skip to 12:50 for the tutorial
Dear Lord, thank you for that!
Wish I would’ve seen this before I got over 11 minutes in… 😂
Thanks for this , I have 2 Dumbo transmitters and didn’t realize I could just use one.
Thanks for watching and for support. I'm glad it was helpful 🤙
Only downside is the lack of memory and no fail safe (more for Nitro), but great budget transmitter. The rechargeable battery capability is a + for me. But the multiple binding is great for additional RCs or project builds since the receivers are value and have 6 channels.
@@motorheadaddictions2761 there is fail safe but it does not apply brake system. It will only make your throttle to be neutral instead of braking.
The downside to having one TX bound to many rc cars is that you don't have the option to let other people drive your cars.
That's the number one rule never hand over your radio.. 😊
Thanks for the video. But dude, thirteen+ minutes before showing how to do it?
For anyone curious. After connecting the receiver, you press the small button on the side of the receiver for three seconds to bind it to the transmitter. You press the same button three times quickly to enable the gyro.
There you go, saved you fifteen minutes.
Excellently done video. Your work is appreciated. Blessings my friend.
Thanks for watching 🤙 the support is very much appreciated! Blessing to you as well👊
Very helpful video. Keep it up fam💪💪💪👍
Thankyou. Awesome video. It was exactly what I was looking for. I learned everything I was trying to find out from this one video. Liked and subscribed.
Simon. (Australia).
Thanks for the great video and info. Saved me some $$$$. Great job on explaining 👊👊👊👊👍👍👍👍
I also have those orange wheels on my ZD racing and they are so good, I got mine for £15 of Amazon.
Nice video too. 👍
Thanks for watching and for the support🤙! Agreed, these are solid value wheels, especially for 17mm. They sell them with different tire options too.
Someone else on here mentioned he had a blowout ~50-60mph, I believe. I haven't had them up to that speed yet, but just a heads up.
@@motorheadaddictions2761 yeah most likely. I added duct tape on the inside before glueing them and now they are as good as hoons wheels. I’m surprised that the rims haven’t cracked even though I had horrible crashes going 68mph.
Anyway had a look at your channel and it is awesome. You should have way more subs and views.
@@getsetdrone6921 Very much appreciated 🤙 and great tip on taping the wheels. I'll keep that in mind for future wheels. You're hitting some nice speeds too🤘
Cool peoples like you make this RC community 🤙 thanks again!
very nice vid bro!👍🏻 i do it same way! most impressive of this dumbo is the range and response!👍🏻
Thanks for watching and the support! Agreed, the response and range are great. Best budget tx and rx for electrics. You can pick up a rebrand rbr/c version for cheaper too, if you're good with 4channel. If it had a failsafe, it'd be great for Nitro too and the best.
Great video, man. Very helpful.
About the battery for the transmitter, for the JST connector what type of battery and what voltage do you need?
Thanks for the video.
Thanks for watching 👊!
Great video. Very helpful. Thank you!
We really need a running video on the 2wd, it looks awesome dude. 🙏😎
I'm ready to blow my brains out waiting on the info for linking the receiver
Cool video
Nice video,
Btw, how do we unbind the transmitter and the receiver ?
Thanks in advance
Would you not just leave it bound until you have another transmitter at hand that you want to bind to the receiver?, then same process as shown etc
Bro, thanks. Its work! Done like & subscribe👍😁
Thanks for watching and for the support 🤙 very much appreciated and glad it helped!
Wow I have that transmitter in gold! 6 channel also.
It's a great transmitter and receiver setup. Awesome response and range and only take 4aa🤙 Can also bind to multiple receivers. I highly recommend picking up extras, ~$10 w/gyro(especially since you have the 6ch.), for your other RCs or future builds.
I have an rc car with remote and receiver can I install these on an rc foam airplane
Sir,can you do a video on how to calibrate a dumbo rc transmitter,mine was not functioning normally,,before,it was normal but when i changed the esc,it mulfunctioned,,thank you
Thanks for the video which exactly reply to one of my two questions of these days. Now that this is clear for me I would like to know if with 2 Dumbo radios can I play with my son together binding two receivers (one for each radio) and have no interference? thanks for help
Thanks for watching and the support! I'm glad it was helpful 🤙
@@motorheadaddictions2761 thanks for reply but you didn't answer to my question :) can you help me?
@@bipantera Sorry, I had missed the question. If I understood correctly, yes multiple RC cars(each programmed to their own DumboRC transmitters) can run at the same time with no interference. This applies for any 2.4ghz Transmitter and receiver.
@@motorheadaddictions2761 that's great. thanks so much
I'm building a drag car and decided to use my Dumbo radio for it. I bought a second receiver to use. For some reason when I bind it, the steering works fine but when I turn power off to car I lose binding to the esc. Any suggestions?
Are all the channels constantly powered? I hooked up lights to my dumbo an the switches don't turn the lights on or off. They just stay on. But putting on a servo it will work properly
What model is the middle one?
Nice info. Do you think X6 transmitter will work with 4ch receiver?
Thanks for watching 🤙! DumboRC X6 tx will bind to a DumboRC 4ch rx just fine, the last to channel controls just won't have function.
Can I bind a 4ch controller with a 6ch transmitter, I bought 2 6ch not realizing I had the 4 ch controller. I'll order another 6ch controller eventually but to get by can I use the 4ch?
Hey good video my dumbo rc transmitter keeps blinking light blue an blue when I turn it on any idea why?
Thanks for watching! Haven't had that issues before but I came across this in a arrma forum. Most mentioned.low battery, but one guys had a servo issue. Otherwise, I'd try reprogramming the Tx. Hope this helps🤙
www.arrmaforum.com/threads/dumborc-transmitter-help.32792/#js-post-452263
Cool video lots of great info. Hey question so, once you bind the TX RX, then you just turn on both and they work together? What about, can I go back and forth between cars. I saw you did maybe but I'm not so sure. Meaning that I could have all my cars on this one receiver with the caveat being, the trims and rates won't save, is this correct? Thanks bro.
You have to turn on - off each car, if not they work together
Hi, I was just wondering if replacing just x6f reciecer for the one with the gyro would work on my JBL Cheetah. Or do i have to buy x6fg transmitter and reciever combo? Thanks.
Thanks for watching! The gyro will work if you just swap the RX, but you do need the 6ch TX to adjust the gyro sensitivity. Otherwise I'm guessing the default will be on medium setting. The adjustment is channel 6.
Can the dumborc 6 channel w/gyro transmitter control a receiver with no gyro I want it for a small crawler but I dont need a gyro
Thanks for watching🤙 Yes, the gyro is built into the receiver. So you would get the x6f receiver instead of the x6fg(gyro). These will bind to the DumboRC x4 - x6 transmitters. If you don't need 6ch control, the x4 is a bit cheaper and you can still use ch5 and 6 in the receivers as aux.
@@motorheadaddictions2761 thank you very much I'm building some wpl kits and I'm using dumbo in my 1/10 so id like to keep the controller numbers down!😂😂😂
Do the receiver and transmitter need to be the same brand to pair multiple?
Thanks for watching! Yes, the TX and Rx have to be the same brand. Note that other companies rebrand this DumboRC set, and they can be paired. Just look at the designs.
Does the ZD racing transmitter also can bind multiple receptors??????
Thanks for watching! If it's a dumboRC version TX, yes. Many of the larger ZD racing models and other brands come with the dumboRC TX, some may have other stickers tho. Just look at the ID.
And how to unbin? And i have always a slow flashing blue led on the top. It works but how do i undo that?
Thanks for watching🤙 hope this helps! I haven't had that issue but read about some that have. Some mentioned low batteries, calibration needed(video on yt for that), or worst case bad servo. Here's a forum link to that one.
www.arrmaforum.com/threads/dumborc-transmitter-help.32792/
@@motorheadaddictions2761 Strange enough it stop sometimes. Maybe because i used 2 different receivers? BTW if i have powered up both receivers at the same time the work also at the same time. :)
I think it'll only bind to one, whichever it picks up first. Hope the flashing thing gets resolved, I bet that gets annoying. I run 2 of the 6ch Tx, on for my drift cars and the other for my TCs and SCTs that I run gyros in. Both have a couple RX binded, haven't had any issues yet. Just annoying to reset the trims and settings. My FlySky is good for the memory, but their gryo RX cost much more than the DumboRC
@@motorheadaddictions2761 I am a beginner with RC and like it a much. I need to say that i have official the Surpass Hobby variant. But i has really working that the remote control 2 receivers at the same time after power up. :) And it's a lot better than the stock RC i got by my WPL D12. I now just waiting for a brushless set and accesoires to put it in the WL 124018. I can't wait for it. :)
does the usb port charge the lipo?
Thanks for watching 🤙
Lipos have a balance charging plug. Most RTR RCs with stock lipos come with a USB charger for the balance port.
Sorry I have another question if I don't disturb. The speed limiter is 50/75/100% like spektrum or 0 to 100% potentiometer like WLToys 12428? Can the steering end point be regulated?
No problem. Not sure I understand the question, but I can confirm that the DumboRC has more adjustments (st and throttle trim + st and th rate + rev switch for both) than the Wltoys Transmitter (only steering trim and throttle rate). Trigger sweep is 70%fwd/30%rev. Hope this helps.
@@motorheadaddictions2761 thanks for replying.
Questions are two
1) to set the max speed is there a continuous fine tuning like 12428 or step by step like Spektrum (e.g. 25/50/75/100%) anyway it strong brakes with everything setting? Our ECX AXE / BRUTUS at 50% speed (the minimum) have no brakes because they are too weak. 12428 at mid speed the brake brakes!
2) steering end point can be set?
just for fun.............I might attempt this just for fun. I think I will make a comment to this helpful video just for fun. ESC is in just for fun. Now I have bound three vehicles just for fun. Sorry for the cuts in the vide, they were just for......... Sorry I could not resist no hard feelings it is just for fun.
I thought it might be funny to reply to my own post just for fun.
What is the 2nd car
Thanks for watching 🤙! The middle car without a body is a zd racing TC8 chassis.
Ok thanks 😊
13:30