@@OTTOAUDIOyeah but what if I want to tune my guitar from drop C to drop A# digitally with guitar sim? Do I really have to go buy a damn 2000 pedal or deal with neural dsp? Why can’t I just choose the tuning or pitch in semitones if we have came this far?? Do I guys offer that?
I’ve been a subscriber for years and would looooove to see this!! I also have a problem with drum programming and them sounding so basic. Maybe some in-depth details about that too?
I recently bought my first audio interface and slowly managed to figure out most of these things through trial and error, but still couldn't figure out how to sort out the noises in the input when trying to record myself. I guess I'll have to invest in a DI box soon enough haha. Thank you for the quick instructional video, much appreciated! I'm sure this is going to help quite a few people
I just bought a di and I’m still getting noise I can’t pinpoint what it is I’m starting to think it’s cables or electrical interference but I can’t pin point and it’s really starting to piss me off
I just started using amp sims this summer and I have a pretty sweet practice and recording setup now. This video was perfect to check my work and confirm that I haven’t been fooling around this whole time lol
I learned recently that on an interface when you are in instrument mode you just have to put the gain ALL THE WAY DOWN and not right before it clips and the amp responds more realistically and how the company expects it to work.
There's a current trend around youtube guitar community of setting the gain to 0, if you go above that you're just boosting the guitar signal with the interface. If you set the gain to 0 you're using the ampsim as the developer intended. Of course if you like the sound of the signal boosted, by all means.
I just switched to amp sims like 8-9 months ago I got a new laptop, upgraded the ram to 16 gig. We got a beheringer interface. Mackie studio monitors. I got 5 pairs of IEM. I got my cables so no RCA's .I'm using Asio , Reaper. I'm using Audio Assault amo sims. I like to use stand alone vs running in reaper. I got active guitars and passive. And I got tons of impulse responses. It's not hard or expensive if you shop around. More metal!🎸
Great video! Would love to see a video of playing amp sims from daw/audio interface back through a real guitar cabinet. Even better, how to include a pedal board into this setup. Thanks!
Great vid, thanks ! A quick question. If I own an analog studio preamp and plug my guitar into it before sending it to the audio interface, do I still need a DI box ?
It's not mandatory but definitely helps. If you consider yourself as a beginner and just play for pleasure, don't spend money on a DI box cause I don't think you'll hear a difference
depends on the software/sim. for instance guitar rig 6 has built-in pre and post recorders so you can both record unprocessed and processed signals. it varies from sim to sim but if they offer standalone, they'll most definitely tell you they have that.
Is the DAW absolutely essential for those who just want to play guitar and jam through the amp sim like they would a normal amplifier? I do have a DAW but unless you want to record would you need really one ?
What about using pedals with amp sims? For example switching from clean to dirty or delay while playing a song, Do you just run your pedalboard through the audio interface or is there another foot-switch device for this?
@@markfranx you'd have to get a midi switcher. I however don't like using amp sims live. I have had computers crash wayyyyyyy too may times to to rely on an amp sim at a gig. At most I'd run an overdrive, wah or say a chorus into an amp sim but that's about it. Amp sims for me are strickly for recording and for practice.
@@xanderraymondcharles Thanks Ray, After playing through guitar amps and pedals for many years the thought of using a sim on a computer seemed weird to me, however over the last few months I have slowly started using amp sims. The one I have been using mostly is the ottoaudio 1111 which came highly recommended by you and I’m loving it. Thanks for your videos man, keep up the good work !!
That's exactly what I wanted to ask. I'm not really looking to record at this point. I'm more interested in playing along to some songs on my spotify playlists.
Im thinking about purchasing amped roots. I have the scarlet 2i2 and havent been getting any sound. Ill try turning the gain down but im struggling to get sound or work reaper. I studied hiurs before finding this. Hope this works and im not missing anything. I have an asus laptop, ltd guitar, cable. Minus a speaker set and camera or editorial software. Any info helps thanks!
Newbie question: What's the difference using an audio interface vs. connecting guitar directly through pc line in jack by using converter? How much does the sound quality differ out of 10?
The signal from a guitar is far too weak to feed into the microphone input or USB port of a PC. The audio interface is essentially a pre-amp that increases the strength of the signal before it goes into the computer. You need an audio interface if you want to record guitar on your PC - you can't plug it directly in
I wish I found this video like a year ago. You explain complicated shit like this in a way that would have been so useful for when I was starting out. I had too go through so many useless videos that I just didn’t understand what they where talking about:/
i still dont get what a DI box is exactly. i get that its for a clean unaltered tone, but is it more for recording a separate clean track that can be altered later? or does it affect the actual tone thats got all the effects running through it in real-time?
What dose the DI box do then? I thought the DI box took a clean signal that you would then use an impulse response over the clean tone. Do you get pro results with an amp sim or do you have to do heavy mixing to it to achieve what you did in the demo? We need a longer step by step lol.
As per my video, a DI box protects your signal from any outside interference. A cab IR is irrelevant to a DI box. It is like wearing a helmet when riding a bike. You can still ride without it, but it is recommended. I mix my demos in about 10 minutes. No major processing, I’ve just been doing it everyday for 6 plus years. I appreciate you saying my results are pro sounding! Thanks a huge compliment. I’m contemplating on doing a mixing tutorial video here soon! Does this all help? Thanks for watching!
YES it does. I hope you do more vids like this and one on mixing quickly so at least songwriting ideas don't sound like poops. I'd like to learn more about IR s too though. I think you explained it all in simple terms that even people like me can understand. Most vids I see gloss over certain aspects I get hung up on. @@xanderraymondcharles
Is it safe to unplug the cable from your guitar when it's connected to the audio interface? The audio interface I'm using won't turn off after turning off my pc or laptop. (asking since you have experience with the equipment) thank you c:
Any computer that is 10 years old or newer will have no issue playing my amp the II II II II. I'd get a small interface as well as something like Presonus eris e 5 monitors. If you want less crashes, get Mac.
Great explanation! is there anyway to go from your interface to an actual amp so you can use and hear the sims through a real amp while playing? or could that not work. Thanks
If you record a track "that your recording IS the di signal" you don't need a di box. if you want record that includes amp sim let the signal go via the track with amp sim to a aux track. And if you record both at the same time, you get a di recordng and a amp sim recording. Here is a signal path to this Gtr > daw > input track (rec nbr 1 the di) >amp sim > output track > input aux track (rec nbr 2) > out put aux track.
The part where the mouse pointer was dragged down, went straight into the UA-cam play-button area and of course, it whizzed by at two million miles an hour...so it means having to stop and rewind until the viewer understands and even then, this video was vague towards the end, but yeah, you are so damn good at guitar, we get that.
So complete like amp sim noob but ive wanted to get into the scene and ive bought a focusrite and ive got my plug ins but i cant my plug ins to work through Alberton or like at all? Im very confused lol
Thank you for this video. I really want to get into using amp sims but was really intimidated by it. I wanted to ask you if you think my laptop can handle it. I have a Lenovo Legion 5 laptop. It has a processor AMD Ryzen 7 5800H and 16GB RAM. I'm concerned about having issues with latency. One thing that's made me apprehensive on getting started is buying all the gear necessary only to find out i can't handle it.
Ha! That is THE MOST powerful laptop processor I have ever seen!! You could run a nuclear reactor with ur billion dollar laptop! Amp sims are not that demanding. Like Mr Otto said, basically any computer made in the last 10 years can run them. While ur computer affects latency, it's also about ur audio interface. But again, basically any audio interface is good enough. And one thing that wasn't mentioned in this video is that u should set ur buffer size correctly for ur audio interface (usually 128 or 64), otherwise u might have glitches in ur audio (for example Behringer drivers install u an app in the taskbar, where u can easily change ur samplerate and buffer size).
The DAW is for recording, so you're saying that if I want to practice for a few hours, I have to open up the DAW, arm for record, then play the amp sim through the DAW? I'm sure people will figure stuff out for themselves but this hasn't been very helpful, so glad you know how to shred.
So is the sound we hear just the output of the Otto II or so you have any post effects used ? I also use the Otto but it always sounds flat in the mix.
Damn. I'm still confused. I'm starting from scratch.. not computer literate at all. First step is buy a computer correct? Then I get confused, where do I even purchase this stuff I need from here? Help please!! Anyone that knows how this works
every time I have used an amp sim, it always sounds like crap. As if I just ran a distortion pedal right into my stereo. How do people get these good tones? must be something i am missing. i have been recording music for 30 years.
I'm a wee bit confused. Almost all audio interfaces have a hi-z/'guitar' input which is, in itself, a 'DI box'. Why do you need a separate, additional DI box before your interface? It might be the reason why most folk's sims/plugins sound sh#tty compared to the YT demos? impedance issues? Still, I would have though the interface's hi-z input took care of that?
@@xanderraymondcharles sorry I’ll try to explain better, on the Scarlett there is a instrument button when you have a standard guitar jack in your supposed to push it, but I remember reading somewhere that when you go through the di box and out into the XLR cable into the Scarlett it forces the “port” te become non instrumental and more of a mic input I could be wrong I have scarlette 2i2 and a radial I should just try and see what it does lol I was just wondering if you can confirm this
@@Djdross ahh yeah I understand now. Correct, using a di box essentially turn the guitar di into mic level or "line" level and is no longer has instrument level signal. This is a good thing! You don't have to engage the instrument level button because the DI box is doing its thing and converting your signal to line level. Line levels IMO are better than the interface instrument cable signals. Hope this helps!
As someone who already knows the basics of how to turn on a DAW, this doesn't feel like it's particularly informative about working with Amp Sims specifically, it's more like a video on how to record guitar on your computer. I get that's the first step in using amp sims, but that's kinda like making a video called "How to run properly" and it's a video of you putting on running shoes and filling a water bottle. For the record, I think this is a great and informative video, just poorly titled.
all i want is an amp sim that doesnt require some insanely complicated DAW....all ii want is to play sound from my speakers like an amp. Couldnt give 2 shits about making an album, recording, producing etc...thats the thing thats REALLY turned me off of this is how complicated the DAWs are
I promise if you spend 2 hours in fl studio or any other major daw you will be able to do everything you need and more. Definitely takes some learning though
Have you thought about painting your studio a cool color? You got some cool gear and guitars you should put them on display behind you not trying to tell you what to do buy I think it could possibly help you grow as stupid as that sounds you have the talent and make better content then most the larger UA-camrs
Holy shite. Why so incredibly insanely complicated? Can't anybody make it as simple as an amp with an overdrive? Humans are so good at trying to improve nothing. With an inferior digital shit.
AN AMP AMPLIFIES THE SIGNAL, THATS ALL IT DOES... A GOOD AMP RETAINS THE SAME SIGNAL WITHOUT DEGRADATION.... apples in apples out. no worms... measure with an oscilloscope as a wave form, a guitar is just a microphone, all these videos seem like some kind of joke... make sure you have brand new strings or it wont work 0:48 and 3:10
My guess would be because you are used to watching creators trying to sell you products in every video, and you are unable to discern the difference between a paid ad and when someone is trying to genuinely educate and help out the guitar community. That would probably be why.
Scoop up the Otto Audio II II II II for half off with my code XANDER50 :ottoaudio.net/collections/ii-ii-ii-ii
Thanks for the shout and for using the II II II II in this video man
OA is my go to.
@@OTTOAUDIOyeah but what if I want to tune my guitar from drop C to drop A# digitally with guitar sim?
Do I really have to go buy a damn 2000 pedal or deal with neural dsp? Why can’t I just choose the tuning or pitch in semitones if we have came this far??
Do I guys offer that?
@@jerryfick8547can u put a take a guitar from drop c to drop a# with it?
@@feedthewolf6930 not yet as pitch shifting is quite different from amps. Stay tuned on that front :)
Your drums and mixes sound fantastic, a video showing your workflow and some mixing techniques would be great!
I second this!!!!
I third this!
@@captainoakleaves36I fourth this
I’m coming forth, to forth this
I’ve been a subscriber for years and would looooove to see this!! I also have a problem with drum programming and them sounding so basic. Maybe some in-depth details about that too?
Nice and clear instructions, like how you explained it and not rushed through allthe steps
You explained everything very well and it only took 7 minutes!
Awesome awesome video! Thank you for breaking this down so simple 🤘🏼🤘🏼
Extremely comprehensive and concise, incredible video!
I recently bought my first audio interface and slowly managed to figure out most of these things through trial and error, but still couldn't figure out how to sort out the noises in the input when trying to record myself. I guess I'll have to invest in a DI box soon enough haha. Thank you for the quick instructional video, much appreciated! I'm sure this is going to help quite a few people
Hey thanks for watching!
Noise gate
I just bought a di and I’m still getting noise I can’t pinpoint what it is I’m starting to think it’s cables or electrical interference but I can’t pin point and it’s really starting to piss me off
@@okami_youtubeit could be because your using single coil pickups, they make Alot of noise
I just started using amp sims this summer and I have a pretty sweet practice and recording setup now. This video was perfect to check my work and confirm that I haven’t been fooling around this whole time lol
This tutorial is quick, detailed, and comprehensive. Great work
I learned recently that on an interface when you are in instrument mode you just have to put the gain ALL THE WAY DOWN and not right before it clips and the amp responds more realistically and how the company expects it to work.
Very clear and good tutorial, thank you for making this video
dude!! thank you!! you are the only one I have seen mention a DI box. Love your sound!
There's a current trend around youtube guitar community of setting the gain to 0, if you go above that you're just boosting the guitar signal with the interface.
If you set the gain to 0 you're using the ampsim as the developer intended.
Of course if you like the sound of the signal boosted, by all means.
I loved watching you playin with your smile on your face, taking pleasure to share your metal riffs with us. Please, bring back this smile ! ;)
Thanks - I have been looking all over for info like this.
Excellent job Sir! Killer tracks!
Thank you for the excellent advice.
next drums and mixing techniques video? I always stuck at mixing and programming good drums
Will do! Thanks for watching!
I just switched to amp sims like 8-9 months ago I got a new laptop, upgraded the ram to 16 gig. We got a beheringer interface. Mackie studio monitors. I got 5 pairs of IEM. I got my cables so no RCA's .I'm using Asio , Reaper. I'm using Audio Assault amo sims. I like to use stand alone vs running in reaper. I got active guitars and passive. And I got tons of impulse responses. It's not hard or expensive if you shop around. More metal!🎸
Great video! Would love to see a video of playing amp sims from daw/audio interface back through a real guitar cabinet. Even better, how to include a pedal board into this setup. Thanks!
You should do a video on dialing in a guitar tone.
X Ray Charles..... My name for you! Good content with some interesting subjects, keep on keeping on !!
Great vid, thanks !
A quick question. If I own an analog studio preamp and plug my guitar into it before sending it to the audio interface, do I still need a DI box ?
Wish I had this video 2 years ago 👌🏼
Do I need a daw?
I just want a good tone to play and practice with.
I could care less about recording.
Question, do you need an IR cab sim to record as well? Or can you just use the amp sim alone to record?
This amp sim from us has it all built into one program & plugin.
You're a maniac, Ray!
In regards to the DI box, how necessary is it? Does it tonally improve the quality of the plugins?
Thank you for this video.
Is daw really important for it? And if it is are there better (free) alternatives to Logic Pro X that you recommend?
Great Video, always something to learn! my question is Do you actually need a DI box? most audio interfaces come with specific input for guitars
You do not need it. Just cleans it up. I personally don’t use one
It's beneficial, but if you have a modern interface, the input for direct is plenty good. His advice is accurate, but not required for great tone.
It's not mandatory but definitely helps. If you consider yourself as a beginner and just play for pleasure, don't spend money on a DI box cause I don't think you'll hear a difference
Excellent video. One question. Can you buy standalone amp sims or is a DAW always necessary to run them
Some run standalone, but you can’t record with them.
I have a standalone mode yes, but you can't record with it is only drawback.
depends on the software/sim. for instance guitar rig 6 has built-in pre and post recorders so you can both record unprocessed and processed signals. it varies from sim to sim but if they offer standalone, they'll most definitely tell you they have that.
Is the DAW absolutely essential for those who just want to play guitar and jam through the amp sim like they would a normal amplifier?
I do have a DAW but unless you want to record would you need really one ?
It is not, however not every amp has a standalone feature. Most do but not all.
What about using pedals with amp sims? For example switching from clean to dirty or delay while playing a song,
Do you just run your pedalboard through the audio interface or is there another foot-switch device for this?
@@markfranx you'd have to get a midi switcher. I however don't like using amp sims live. I have had computers crash wayyyyyyy too may times to to rely on an amp sim at a gig. At most I'd run an overdrive, wah or say a chorus into an amp sim but that's about it. Amp sims for me are strickly for recording and for practice.
@@xanderraymondcharles Thanks Ray,
After playing through guitar amps and pedals for many years the thought of using a sim on a computer seemed weird to me, however over the last few months I have slowly started using amp sims. The one I have been using mostly is the ottoaudio 1111 which came highly recommended by you and I’m loving it.
Thanks for your videos man, keep up the good work !!
That's exactly what I wanted to ask. I'm not really looking to record at this point. I'm more interested in playing along to some songs on my spotify playlists.
Im thinking about purchasing amped roots. I have the scarlet 2i2 and havent been getting any sound. Ill try turning the gain down but im struggling to get sound or work reaper. I studied hiurs before finding this. Hope this works and im not missing anything. I have an asus laptop, ltd guitar, cable. Minus a speaker set and camera or editorial software. Any info helps thanks!
Newbie question: What's the difference using an audio interface vs. connecting guitar directly through pc line in jack by using converter? How much does the sound quality differ out of 10?
The signal from a guitar is far too weak to feed into the microphone input or USB port of a PC. The audio interface is essentially a pre-amp that increases the strength of the signal before it goes into the computer. You need an audio interface if you want to record guitar on your PC - you can't plug it directly in
I wish I found this video like a year ago. You explain complicated shit like this in a way that would have been so useful for when I was starting out. I had too go through so many useless videos that I just didn’t understand what they where talking about:/
great! please make tutorial how to dial or blend ampsims and pedalboards thank you!
i still dont get what a DI box is exactly. i get that its for a clean unaltered tone, but is it more for recording a separate clean track that can be altered later? or does it affect the actual tone thats got all the effects running through it in real-time?
dude, i downloaded the Otto amp sim. sounds amazing! but its latency is worse than most amp sims i use. how did you remedy this ?
has to do with buffer settings of daw and or interface, the plugin has no latency.
Recommend you diagram setup for visual learners. Thanks for fast but precise video!
Thanks so much man! This was very helpful
Glad it helped!
So is a DAW only required for recording. Im about buy a Scarlett Solo and use STL Toneforge to just jam and play with tones.
Toneforge is made by JST. Tonehub I believe is what you’re looking for. Cheers!
@@xanderraymondcharles oops my mistake I have STL Tonehub installed not toneforge lol. But I don't need a DAW if I dont plan on recording?
@@1992airmanyou do not need a daw for just jamming. Our plugin has a standalone app for that, as do other companies quite often
What dose the DI box do then? I thought the DI box took a clean signal that you would then use an impulse response over the clean tone. Do you get pro results with an amp sim or do you have to do heavy mixing to it to achieve what you did in the demo? We need a longer step by step lol.
As per my video, a DI box protects your signal from any outside interference. A cab IR is irrelevant to a DI box. It is like wearing a helmet when riding a bike. You can still ride without it, but it is recommended. I mix my demos in about 10 minutes. No major processing, I’ve just been doing it everyday for 6 plus years. I appreciate you saying my results are pro sounding! Thanks a huge compliment. I’m contemplating on doing a mixing tutorial video here soon! Does this all help? Thanks for watching!
YES it does. I hope you do more vids like this and one on mixing quickly so at least songwriting ideas don't sound like poops. I'd like to learn more about IR s too though. I think you explained it all in simple terms that even people like me can understand. Most vids I see gloss over certain aspects I get hung up on.
@@xanderraymondcharles
I have an audio interface and use audacity. I can't hear my guitar in real time, I can only hear it during the playback when I finish recording.
Great video Ray! Can you please do a tutorial on how you create drums for your tracks?
how can I put into the chain a real cab? which kind of amp do I need for it? I like when the cab move air around me...
Yeahbhh🏋🏾🏋🏾🏋🏾🏃🏾🏃🏾🔥🔥🔥🔥💯💯☠️☠️☠️☠️rock and roll Mane 🤟
Can you use FRFR speakers instead of studio monitors? I dont see xlr outputs on your Audio Interface.
Is it safe to unplug the cable from your guitar when it's connected to the audio interface? The audio interface I'm using won't turn off after turning off my pc or laptop. (asking since you have experience with the equipment) thank you c:
this was very helpful! go birds!!
What laptop/desktop do I need ? Do specs play a big factor?
Any computer that is 10 years old or newer will have no issue playing my amp the II II II II. I'd get a small interface as well as something like Presonus eris e 5 monitors. If you want less crashes, get Mac.
@xander. - amazing tutorial for beginners. big fan of what you do thank you!
p.s. the house of masks riff you wrote is amazing
Great explanation! is there anyway to go from your interface to an actual amp so you can use and hear the sims through a real amp while playing? or could that not work. Thanks
If you record a track "that your recording IS the di signal" you don't need a di box. if you want record that includes amp sim let the signal go via the track with amp sim to a aux track. And if you record both at the same time, you get a di recordng and a amp sim recording.
Here is a signal path to this
Gtr > daw > input track (rec nbr 1 the di) >amp sim > output track > input aux track (rec nbr 2) > out put aux track.
The part where the mouse pointer was dragged down, went straight into the UA-cam play-button area and of course, it whizzed by at two million miles an hour...so it means having to stop and rewind until the viewer understands and even then, this video was vague towards the end, but yeah, you are so damn good at guitar, we get that.
How if the drum and bass is ready midi? can it be zero latency? and the sound of the guitar is heard
Yes with the proper settings it is zero latency and you can play along with it.
how do I use my 4x12 cabinet using my amps power only?
This could not come at a better time, I've just gotten an interface!
I hope this helped!
So complete like amp sim noob but ive wanted to get into the scene and ive bought a focusrite and ive got my plug ins but i cant my plug ins to work through Alberton or like at all? Im very confused lol
did you get it sorted? I can advise if not...
@OTTOAUDIO thankfully I did. Thanks for the offer!
What's your opinion on amp sim vs multi fx unit such as a helix?
Great video, no bull
Hey Xander, is there any difference to a passive/active D.I Vs a two notes IR DI box?
Hey i have a katana mk50 and it can connect to my pc and transmit audio. Should i still get an audio interface?
in my opinion, yes.
Hey man could you make a video on how to use amp sims live?
This whole time i thought I needed a real amp to use with a DI box. But I guess not lol. I guess it's an option if I wanted to?
Ok now how do you make those backing tracks
i make them from scratch
Thank you for this video. I really want to get into using amp sims but was really intimidated by it.
I wanted to ask you if you think my laptop can handle it. I have a Lenovo Legion 5 laptop. It has a processor AMD Ryzen 7 5800H and 16GB RAM. I'm concerned about having issues with latency. One thing that's made me apprehensive on getting started is buying all the gear necessary only to find out i can't handle it.
You'll have no problem, the latency on my plugin, even with 12 year old machines, is ultra ultra low.
Ha! That is THE MOST powerful laptop processor I have ever seen!! You could run a nuclear reactor with ur billion dollar laptop! Amp sims are not that demanding. Like Mr Otto said, basically any computer made in the last 10 years can run them. While ur computer affects latency, it's also about ur audio interface. But again, basically any audio interface is good enough. And one thing that wasn't mentioned in this video is that u should set ur buffer size correctly for ur audio interface (usually 128 or 64), otherwise u might have glitches in ur audio (for example Behringer drivers install u an app in the taskbar, where u can easily change ur samplerate and buffer size).
This was so helpful lol
Can I run my wah pedal into my interface?
Yes
The DAW is for recording, so you're saying that if I want to practice for a few hours, I have to open up the DAW, arm for record, then play the amp sim through the DAW? I'm sure people will figure stuff out for themselves but this hasn't been very helpful, so glad you know how to shred.
Yes. But some amp sims have a standalone version, so u don't have to open ur daw!
I want to buy that guitar! What is it?
So is the sound we hear just the output of the Otto II or so you have any post effects used ? I also use the Otto but it always sounds flat in the mix.
can you use an Irig as an alternative?
Im so lost. How doni use an amp sim? How do you download it how how idk
I'll let you guys know how budget you can get from buying a second hand guitar to the equipment for amp sim playing and jamming with the band!
is the di box necessary to not have a shitty sound
Damn. I'm still confused. I'm starting from scratch.. not computer literate at all. First step is buy a computer correct? Then I get confused, where do I even purchase this stuff I need from here? Help please!! Anyone that knows how this works
every time I have used an amp sim, it always sounds like crap. As if I just ran a distortion pedal right into my stereo. How do people get these good tones? must be something i am missing. i have been recording music for 30 years.
You’re going to have to give more info. Your setup, studio monitors, headphones. Guitar, Amp sim, etc
I'm a wee bit confused. Almost all audio interfaces have a hi-z/'guitar' input which is, in itself, a 'DI box'. Why do you need a separate, additional DI box before your interface?
It might be the reason why most folk's sims/plugins sound sh#tty compared to the YT demos? impedance issues? Still, I would have though the interface's hi-z input took care of that?
Ditto. I was also confused by this
Does the Di XlR force the scarlette in mic mode?
im not sure i understand your question
@@xanderraymondcharles sorry I’ll try to explain better, on the Scarlett there is a instrument button when you have a standard guitar jack in your supposed to push it, but I remember reading somewhere that when you go through the di box and out into the XLR cable into the Scarlett it forces the “port” te become non instrumental and more of a mic input I could be wrong I have scarlette 2i2 and a radial I should just try and see what it does lol I was just wondering if you can confirm this
@@Djdross ahh yeah I understand now. Correct, using a di box essentially turn the guitar di into mic level or "line" level and is no longer has instrument level signal. This is a good thing! You don't have to engage the instrument level button because the DI box is doing its thing and converting your signal to line level. Line levels IMO are better than the interface instrument cable signals. Hope this helps!
how do i get it i cant find anything for free when i try to
As someone who already knows the basics of how to turn on a DAW, this doesn't feel like it's particularly informative about working with Amp Sims specifically, it's more like a video on how to record guitar on your computer.
I get that's the first step in using amp sims, but that's kinda like making a video called "How to run properly" and it's a video of you putting on running shoes and filling a water bottle.
For the record, I think this is a great and informative video, just poorly titled.
Ok
not bad riffin yo
I appreciate you
If the audio interface already has a Hi-Z, you don't really need a Di Box.
reaper totaly changed the look. I can't find the monitoring button :(
download an older version from their site?
so what do i do with ilok
its free, sign up is all you have to do
all i want is an amp sim that doesnt require some insanely complicated DAW....all ii want is to play sound from my speakers like an amp. Couldnt give 2 shits about making an album, recording, producing etc...thats the thing thats REALLY turned me off of this is how complicated the DAWs are
Ours has a stand-alone so get it, it’s all you need to riff
I promise if you spend 2 hours in fl studio or any other major daw you will be able to do everything you need and more. Definitely takes some learning though
Neural DSP let's you use the amp sims without a DAW
You can use our amp sim without a DAW
@ how? 👀
Why don't you try cakewalk th3 vst? i think you will like a bit.
🤘
What the hell is ilog is it necessary?
I literally explained what it is in the video. It’s pronounced ilok. Hope this helps
Having noise issue in logic even with a di can someone please help me pinpoint the issue Jesus Christ
Go birds
Have you thought about painting your studio a cool color? You got some cool gear and guitars you should put them on display behind you not trying to tell you what to do buy I think it could possibly help you grow as stupid as that sounds you have the talent and make better content then most the larger UA-camrs
Holy shite. Why so incredibly insanely complicated? Can't anybody make it as simple as an amp with an overdrive? Humans are so good at trying to improve nothing. With an inferior digital shit.
AN AMP AMPLIFIES THE SIGNAL, THATS ALL IT DOES... A GOOD AMP RETAINS THE SAME SIGNAL WITHOUT DEGRADATION.... apples in apples out. no worms... measure with an oscilloscope as a wave form, a guitar is just a microphone, all these videos seem like some kind of joke... make sure you have brand new strings or it wont work 0:48 and 3:10
6 and a half years and only 113,000 subs ? lol Dude, let people use an amp sim they way they want to....
Why does this feel like a 7min commercial?
My guess would be because you are used to watching creators trying to sell you products in every video, and you are unable to discern the difference between a paid ad and when someone is trying to genuinely educate and help out the guitar community. That would probably be why.
All was going well until you started playing. There is nothing that you could set up incorrectly or do wrong that would possibly make a worse sound.
Dawg you gotta give us a tutorial on how to get plug-ins and how to use ilok/ where to get activation code and how to transfer it to DAW lol