Не хватает жестокости скручивания вдоль оси трицикла для задних маятников: колесо стоит далеко по ширине от шарнира маятника. А также не была бы лишней корзина под сиденьем 😉👍🏻
Hebat mantap teruskan menciptakan yang sangat di butuhkan orang lain yang menurutnya sulit menjadi mudah semoga sukses dan ciptaannya bermanfaat bagi semua orang
Congratulations on your talent, you have a very powerful and beautiful 3-wheeled vehicle. Great effort. Proving that anyone can dare to think and do anything. Is this car difficult to drive on curves?
Öncelikle selamlar saygılar sunarım değerli insan. Çok güzel muhteşem, çalışmalar sergiliyorsunuz. Zevkle takip etmeye çalışıyorum. Eline, emeğine sağlık.🇹🇷👏
Other than doing so many things utterly wrong is kind of cute. The angle of the front forks is wrong, not a lock washer was used anywhere on this bike. The brakes were put together improperly the welds were not robust enough. When he test drove it the axles on both sides as well as the tires wobbled and the gears also wobbled. The list goes on andon. It is a nice idea and with somebody that was more technically capable it would have been a wonderful idea. In addition there are no Transmissions, just a clutch. The chain goes from the engine to a jackshaft then to the rear wheels no transmission involved. Oh yeah where is the battery? Thank you have a nice day. Bob from Virginia USA
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
I have no idea, I'm just a spectator and a craftsman. Maybe I've overlooked something, but I think it's just a single nut that holds the rear wheels in position
you need a solid rear axle, too many reasons to explain why, you will find out as you use it, but trust me you will fit an axle from wheel to wheel soon,
12:39 размеры и прочность задних рычагов просто поражают; звёздачки так и вовсе кричат в экстазе от предстоящих нагрузок! Блин, думах хоть сегодня не будет подобного треша, но автор упорно всё делает сам, не желает позвать человека, который хоть немного понимает в конструировании.
hola saludos desde Venezuela felicidades por tu proyecto, me gustaría fabricar un parecido pero con un cajón encima para carga, me podría alguien guiar en las medidas
El proyecto es muy bueno, pero falta precision que se obtiene con maquinaria para centrar los ejes y deberias intentar colocar del embrague al eje principal una correa dentada de distribucion, ejemplo peugueot o Nissan... con la de 83 dientes basta.... para asi eliminar el molesto ruido de la cadena principal. Me gustaria verlo modificado asi, solo dejando las cadenas para la traccion de los neumaticos. Ademas que sin diferencial es dificil doblar.... pero como dije muy buen proyecto
The first Harley Davidson production motorcycles had a single cylinder soup can (tin) cylinder liner and only produced 4 HP at maximum. This 200cc motor could produce 20 HP or more, depending on carbonation, etc. 14HP or more is generally enough to drive a small motorcycle to 55 MPH.
Dunque: A) non c'e un differenziale,un giorno scoprirai a cosa serve... B) un prototipo simile lo abbiamo costruito nel 1997 (con differenziale) e mandato in BMW e Piaggio,nessuno sembrava interessato,stranamente nel 2006 Piaggio mise in vendita l'MP3,che era molto diverso,ma aveva adottato parecchie delle innovazioni del nostro prototipo...
Keren banget sukses bosku lanjutkan dengan cepat bikinnya sediri mantap 👍🙏👎
Thank you!
wow nice video 👌👌👌👌👌👌🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩 Bangladesh
❤❤❤
Не хватает жестокости скручивания вдоль оси трицикла для задних маятников: колесо стоит далеко по ширине от шарнира маятника. А также не была бы лишней корзина под сиденьем 😉👍🏻
Parabéns pelo projeto do triciclo motorizado ficou top meu amigo ...
Agora a diversão vai ser só alegria...
Now that's what I call a beautiful video.................... congratulations.
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪
❤❤❤❤❤❤❤❤
good
Thanks!
Hello Fawa Bros beautifully made excellent work good job well done
Thank you!
Hebat mantap teruskan menciptakan yang sangat di butuhkan orang lain yang menurutnya sulit menjadi mudah semoga sukses dan ciptaannya bermanfaat bagi semua orang
Excelente trabajo.. felicitaciones desde Argentina..
Thank you!
Love from India ❤
Thanks!
Congratulations on your talent, you have a very powerful and beautiful 3-wheeled vehicle. Great effort. Proving that anyone can dare to think and do anything. Is this car difficult to drive on curves?
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
Canada 👎
That looks wow fun. I'd love something like that. Great video
Thanks!
Amazing brother powerful video good job
Thank bro!
Very good 👍👍👍 bhai ji
I like his videos because I'm looking forward to find some minor or major mistakes in his creations.
Was not disapointed ... ;-)
Craftsman I like your videos all the time do more by helping the world
جميل جدا رائع جدا عبغري😉😆💪👍👏👏👏👏👏من اين انت انت مخترع بارع جدا
Thank you so much! I come from Timor Leste.
VERY GOOD 👍👍 THANKS FOR KNOWLEDGE SIR YOU ARE REALLY GREAT THANKS AGAN HERE KRISHNA HARI BOL
Öncelikle selamlar saygılar sunarım değerli insan. Çok güzel muhteşem, çalışmalar sergiliyorsunuz. Zevkle takip etmeye çalışıyorum. Eline, emeğine sağlık.🇹🇷👏
Thank you so much!
👍🙏
Mantap bang seht selalu ❤❤
Thanks!
You're a genius.
Mantap, 👍 exsellent
Thanks!
А ни кого не смутило, что выхлоп, держится только на 2 болтах, которые на движке? Не хватает точки опоры. А так идея отличная!
Если б только это ...
Isso é só pra quem sabe e entende, muita precisão e seguro no que está fazendo 👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏😘 br.
Thanks!
😅😅
Hello ikut belajar cara buatnya 👍🇲🇾
Other than doing so many things utterly wrong is kind of cute. The angle of the front forks is wrong, not a lock washer was used anywhere on this bike. The brakes were put together improperly the welds were not robust enough. When he test drove it the axles on both sides as well as the tires wobbled and the gears also wobbled. The list goes on andon.
It is a nice idea and with somebody that was more technically capable it would have been a wonderful idea.
In addition there are no Transmissions, just a clutch. The chain goes from the engine to a jackshaft then to the rear wheels no transmission involved. Oh yeah where is the battery? Thank you have a nice day. Bob from Virginia USA
Test superbe😁😀👍
Thank you!
Most impressed with the engine that runs on 7UP !
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
I have no idea, I'm just a spectator and a craftsman. Maybe I've overlooked something, but I think it's just a single nut that holds the rear wheels in position
Good
Inovasi nya sangat bagus tapi 👍👍👍
👍🤝Друг мне кажется слабенькая подвеска☝️🤔🤨😳
Semangat slm sehat bosku🙏👍👍👍👎
Thanks!
So good 😮😮❤
new subscriber...
Thanks!
you need a solid rear axle, too many reasons to explain why, you will find out as you use it, but trust me you will fit an axle from wheel to wheel soon,
12:39 размеры и прочность задних рычагов просто поражают; звёздачки так и вовсе кричат в экстазе от предстоящих нагрузок!
Блин, думах хоть сегодня не будет подобного треша, но автор упорно всё делает сам, не желает позвать человека, который хоть немного понимает в конструировании.
The brake banjo bolts should have a washer on each side. In video they were both stacked up on only one side of banjo bolt. Very cool trike!
Parabéns 🎉pelo trabalho ❤
You got those directional chris crossed.
Keren 👍
Thanks!
Good stuff
hola saludos desde Venezuela felicidades por tu proyecto, me gustaría fabricar un parecido pero con un cajón encima para carga, me podría alguien guiar en las medidas
Гарна робота❤
Смотрю уже давно супер а можноли реобрести эти самоделки.
❤ good man
Woow!!!!!
Dont care what anyone elsa has to say I want one😂
El proyecto es muy bueno, pero falta precision que se obtiene con maquinaria para centrar los ejes y deberias intentar colocar del embrague al eje principal una correa dentada de distribucion, ejemplo peugueot o Nissan... con la de 83 dientes basta.... para asi eliminar el molesto ruido de la cadena principal. Me gustaria verlo modificado asi, solo dejando las cadenas para la traccion de los neumaticos. Ademas que sin diferencial es dificil doblar.... pero como dije muy buen proyecto
The first Harley Davidson production motorcycles had a single cylinder soup can (tin) cylinder liner and only produced 4 HP at maximum. This 200cc motor could produce 20 HP or more, depending on carbonation, etc. 14HP or more is generally enough to drive a small motorcycle to 55 MPH.
а как "это" поворачивает? ведь межосевого дифференциала нет. и привод жестко на оба задние колеса.
И конструкция подвески неправильная. От количества косяков аж хреново стало
Very, good, guru
Clip đã đầu tư đến như thế, thì gắn thêm bộ vi sai ngay giữa 2 gối đỡ vòng bi là ok ngon luôn 🙄, hơi tiếc nhỉ 🤔
Legal com sempre parabéns
Thanks!
عمل متقن جميل جدّا صديق
Thank you so much!
Just amazing
Thank you!
Jngn bilang luar biasa sebelum mampu ciptakan sendiri bom nuklir jelajah antar benua di negrii sndiri,citptaan sndiri !!
Where do you buy the tubes for the bearings ?
I am purchase this bike please 🙏 reply
Dunque:
A) non c'e un differenziale,un giorno scoprirai a cosa serve...
B) un prototipo simile lo abbiamo costruito nel 1997 (con differenziale) e mandato in BMW e Piaggio,nessuno sembrava interessato,stranamente nel 2006 Piaggio mise in vendita l'MP3,che era molto diverso,ma aveva adottato parecchie delle innovazioni del nostro prototipo...
Amazing video
😎👍👏👏👏
Lol the hand grips on the pegs, if it works it works I guess.
What is the name of the clutch drum you put on an engine's axle?
اللهم صل على محمد وال محمد
عيد مبارك سعيد وكل عام وانتم بخير
Велосипед это-транспортное средство приводимое в движение при помощи мускул ной силы. А это мопед на трех колесах
Ficou show muito bom só que ele poderia ter colocado motor com partida elétrica
Deberías de ponerle placas de quita y pon para tapar el motor y protegerlo de la lluvia.
Felicidades por todos lsus proyectos, donde puedo conseguir los planos de algunos proyectos que me gustaron?, espero de su respuesta, gracias
Whit wht bulding cartogena or oxinitroso? Ir butano?
Ottimo lavoro ma manca il differenziale, prova a fare una curva stretta!
Great job but the differential is missing, try to make a sharp turn!
Klo di indo ada tk samperin bos ,,❤❤❤❤
Parabéns pela engenharia. O que você faz com esses veículos, depois de fabricados?
5:00 замок на цепь установлен неправильно, не той стороной. До этого ещё мотор был прикручен без шайб.
Т.е конструкция подвески тебя вообще не смутила?😂
@@X_Killer. 12:39. Был у меня коммент и про это.
Кстати, а вас там размер приводных звёздочек не смутил? 😊
@@ИгорьЛисица-в1ъ самое маленькое зло🙂
عمل جميل ومتقن
Thank you!
👍
Очень. Клёва
1:35 WHAT IS THIS?
Helo my name os Jesse, I'm com Brasil. You can make one little car with the same motor for 2 people?
Thank from Brasil 🙏🙏🙏
Esse inventor ê um gênio pRabens
author, this is a great job. please tell me, what is the cruising speed of this instance? Like definitely. thanks for the reply.
waygel na waygel uh.
What model your welder Sir?
Fantadtico
👌
Rear left brake disc has a right wobble 😂
сделав независимыми подвески колес, он больше проиграл, чем выиграл. лучше бы диференциал сделал.
A differential is always needed with 2 driven wheels.
Hi ! could you please let me know the solder equipment you use for the project. Thanks
Muito bom.
Thanks!
When you will make someting real powerfull? 😁 you can do it. 💪🏻😎🙏🏻👍
Try to make your own engine...next level creation
Thanks for your suggestion!
Super schöner Bau . Ob man(n) den motor startprobleme bereiten kann wenn der choke zulange an ist?
😮😮😮😮😮😮 by @@fawabros
@@TAKNT. N. Nnn. N. .nbbbbv l,😮❤
Ở Việt Nam chạy ra đường sẽ bị thu hồi 😢
Nise
13:05 и снова замки установлены неправильно!
Ficou top muito bom
You must take off the governer from the engin to get max power
Центровки ноль все на глаз...беение это пиздец,аморы поставлены без учёта веса пассажира капец кароче 😢задумка хорошая но материа испорчен в хлам