Yamaha virago 250 xv250 part 21 paint the chain guard and motor
Вставка
- Опубліковано 15 вер 2024
- I paint the motor and exhaust flat black on the 2000 Yamaha Virago 250 xv250. Looking good!!
Use this link below when you shop on Amazon and it will help fund my channel!! It won't cost you anything and everything will look exactly the same !!!
------- My Amazon Affiliate link!!! amzn.to/301x7sn
------
Playlists you may be interested in!!!
1979 Triumph Bonneville T140d Special, back to life !! -- • 1979 Triumph Bonnevill...
1983 Honda CB1000 Custom, back to life !! -- • 1983 CB1000 C - back t...
2000 Yamaha Virago 250 xv250 V-Star 250 back to life !! -- • 2000 Yamaha Virago 250...
Thats what im talking about! Those fins look way better polished.
Yep, looks pretty good IMHO. :-)
I love that you’re breaking down everything. I’m really enjoying the vids!
I'm so glad!
man great videos in this series. I'm considering getting a virago 750 and doing it up. For someone who knows nothing about bikes, this is a great watch . Thanks!
Exellent videos man👍🏼
Lot’s of respect from Denmark in the cold north
Thank you very much!
Nice job. greetings from Finland
Thank you!
I hope this paint holds up better!!
Sweet
I painted my engine graphite grey and fits really well with the jet black frame
OH, I'll bet that looks cool!
looks great!
Thank You!!! That means a lot coming from you!
Youve done a great job on it, cant go wrong with the black white and red such a classic hotrod colour scheme love it!
Gonna be using your videos to work on my Virago (2001). I don’t have HALF the experience and knowledge you do, but the videos are very helpful and hopefully I’ll learn a thing or two throughout the project. How many miles did your father’s bike have when you started the project?
Got for it !! That's how I learned. Lots of mistakes but in the end, got the look and performance I wanted !!!
Rabid Squirrel Garage Thank you! It’s gonna be a great project to keep me busy through this New Jersey fall/winter. Off the top of your head do you know how much you spent to restore the Virago?
Красиво конечно. Что будет после попадания в лужу. Вся красота покроется пятнами и отмыть эти пятна не получится.
Very good, beautiful, awesome color combination, flat black with the piano always fit fine. Can you please help me with the carburetor tune? My bike is drying too much fuel, 18 liters per Km, this with a 250 engine is too much. If you could get me a hand with this I will really appreciate
My best guess is that you are not in the U.S. If true, stay away from gas stations that are small and don't have a big name. Also, you can run something like Stay-Bil in the gas to help combat the ethanol.
@@rabidsquirrelgarage745 Yeah, I'm from Brazil, and here the gas stations suck, the gas is poor and suck too, but I mean the carburetor adjustments to save some fuel, what can I do to not spend too much fuel? Change jets, needle, or something else? Thank you for your time sir.
@@jorge.barcelos You can try to adjust the air fuel mixture screw but I would not do anymore than that. Like I said, fuel additives like Stay-Bil will help out a lot.
Go with the left side
I have a 97 virago 250 and the cam and chain cover on cylinder 2 fell off going down the road and I cannot find the replacement part ANYWHERE. Would you have any idea where to find one??????
Try bikebandit . com -- They have all kinds of stuff and a parts schematic break down of the bike.
Rabid Squirrel Garage I can’t even find the part on schematics. All I see is to order a whole new cylinder :( thank you so much for your help though!
i have a virago 250 from 1992 i have one question for the transmission is that the same oil then for engine or is that and other thank you serge
The oil in the engine is for both the engine and transmission.
thank you for your reply
serge
@@sergebaele5577 No problem !!
is that round air filter easy to instal
Yes, just need to warm up the rubber boot some and it slides right on. Here is the video of me installing it! ua-cam.com/video/WVl1nrjuuvE/v-deo.html
Where did you get that seat
I just shaved down the original seat.
What year is the bike
2000
@@rabidsquirrelgarage745 thank you brother I really want to build a bobber and I really love the look and what you’ve done where did you get all your bobber stuff rear fender etc. I live in Canada so some part I might not be able to get but.
@@ferrelli76 Most all of it came from Amazon or eBay. The rear fender is the stock fender that I cut down and reshaped. Check out the playlist for every step I took to make the bike look like this !!!! ua-cam.com/play/PLWdE9doE8QNAAIABw3OdPIsoMHYWsJmAW.html
@@rabidsquirrelgarage745 and I shall do so thank you for the reply a lot of people don’t reply I am great full to meet your acquaintance stay safe out there with all this covid crap going on and have a great weekend.
@@ferrelli76 You're Welcome !! Stay safe out there.