I love your videos and appreciate your work. I see you drill the holes for the pegs before you put the pegbox together. Dont you have problems with the angle? Because the walls of the pegboxs are not parralel. Thanks
As you may be familiar with instrument making tools, we usually use a Spiral Reamer blade in finishing the holes process while making pegboxes. These reamers make holes, lets say 7-8 mm. Gradually difference from one side to another for fitting the pegs. This reamering process will make the holes angles correct automatically
There is a mythical story about how the oud invented in the first place. The story described the oud as a kid's leg and the pegbox is his foot and pegs are foot fingers.
Great technique, friend! You are armed but at the same time you use basic techniques, for those who do not have industrial tools. I keep learning from you, great idea for a very didactic video.
I used to postpone my projects because I lacked the right tools. Now I don't want to make that mistake again. Also, making tools and using creative methods is a lot of fun. I'm happy that you liked it.🌹
I do have plan to share my oud plan on pdf, but right now it's still in testing process, and sometimes I change some small measurements based on experience. As soon as I could release it, I would be very happy to do that 🙏🌹
There is no screw or nail will left on the pieces. it's just glue that holds pieces together. but as a clamp and holder, I use two screws for better gluing.
@@TKD-c4c yes, building an instrument is also a: art of connecting woods. No gap accepted and no light could pass through before gluing. And it is just one aspect of this beautiful magical process 👌
سلام. سپاسگزارم از توجهتون. استاد اگر زاویه چسبیدن سرپنجه به دسته رو توضیح بدید عالی میشه. من همیشه موقعه اتصال و این دو نقطه مشکل دارم ، کارم فیکس در نمیاد. البته گارگاه ندارم توی خونه با وسایل ابتدایی کار میکنم
@@Saher0369 چشم. برا اونم یه ویدیو درست میکنم. هرچند که در نهایت با هر ابزاری هم که کار بکنید باید برای جزییات کار و دقیق شدن دست به مغار و سنباده و لیسه بشید و اون جزییات آخر رو تنظیم کنید. ولی چشم
اجالتا خدمتتون عرض کنم که معمولا دیواره‌ها رو من تمام شده روی ۷ میلیمتر میگیرن. چوب کف رو ۲ میل در نظر میگیرم. سوراخ گوشی‌ها رو هم من ۷ به ۸ میزنم. که گوشی‌های مرسوم عود توی بازار تقریبا رو این سایز هستن 🙏❤️
Hello Mansour! Wonderful work. I didn't understand what the red piece you made at the beginning was for? Was it just a template for cutting the sices of the Peg Box? Best wishes - Peter in Paris
وقت شما بخیر. این موضوع بستگی به زاویه دسته و سطح گریف سازتون داره. منتها من اکثر عودهایی که دیدم سوراخ‌ها رو روی ۸.۵ تا ۹ میلیمتر از سطح صفحه زدن. البته نه همشون. خودمم روی ۹ بیشتر مواقع جواب گرفتم.کمتر که باشه معمولا مضراب زیاد به صفحه برخورد میکنه و سعی کنید اکشن رو با زاویه‌ی سطح گریف و بلندیش جبران کنید 🙏❤️
Again thank you for this awesome video and for ur knowledge sharing 😘😘😘
thank you for watching. I believe in sharing what I know.
I love your videos and appreciate your work. I see you drill the holes for the pegs before you put the pegbox together. Dont you have problems with the angle? Because the walls of the pegboxs are not parralel. Thanks
As you may be familiar with instrument making tools, we usually use a Spiral Reamer blade in finishing the holes process while making pegboxes. These reamers make holes, lets say 7-8 mm. Gradually difference from one side to another for fitting the pegs. This reamering process will make the holes angles correct automatically
دست مریزاد و خدا قوت.
فدای شما. ممنون که میبینید 🙏❤️
Bravo. L'artiste
Thanks a lot 🙏❤️
👍👍👍👍👍🙏❤That is is a work in the rules of measurement and art nice video.
There is a mythical story about how the oud invented in the first place. The story described the oud as a kid's leg and the pegbox is his foot and pegs are foot fingers.
I am very impressed by your calmness and precision in your work. You are truly an artist.
thanks for your kind words 🙏❤️ it's a lot of joy
Perfect work 👌🎼🌹
Beautiful work. Thanks for the video
Thanks a lot for watching and your support 🙏♥️
Many thanks. Good job. Mohamed from Marrakech
Thank you too for watch and support 🙏🌹❤
ایول منصور🙌
مرسی یاسر که دیدی 🙏🌹❤️
Great technique, friend! You are armed but at the same time you use basic techniques, for those who do not have industrial tools. I keep learning from you, great idea for a very didactic video.
I used to postpone my projects because I lacked the right tools. Now I don't want to make that mistake again. Also, making tools and using creative methods is a lot of fun. I'm happy that you liked it.🌹
👍👍👍👍👍🙏❤
استاذ ممكن تنزل لنا مخطط صنعها pdf راح اكون ممنون لك كثيرا اخي
I do have plan to share my oud plan on pdf, but right now it's still in testing process, and sometimes I change some small measurements based on experience. As soon as I could release it, I would be very happy to do that 🙏🌹
Do you glue it together and or you a screw/nail for a better hold? Or does only that angle connection hold it in place which build be crazy for me.
There is no screw or nail will left on the pieces. it's just glue that holds pieces together. but as a clamp and holder, I use two screws for better gluing.
@@mansouroud Dang, the building of instruments surprises me more and more! Thats why I find the oud so interesting :)
@@TKD-c4c yes, building an instrument is also a: art of connecting woods. No gap accepted and no light could pass through before gluing.
And it is just one aspect of this beautiful magical process 👌
سلام و درود خدمت استاد بزرگوار. اگر امکانش هست در حین کار توضیح بدید خیلی خیلی عالی میشه. سپاسگزارو تشکر بابت این همه زیبایی
خیلی خیلی ممنونم از کامنتتون. رو چشمم. حتما توضیح میدم از این به بعد 🙏❤️
سلام. سپاسگزارم از توجهتون. استاد اگر زاویه چسبیدن سرپنجه به دسته رو توضیح بدید عالی میشه. من همیشه موقعه اتصال و این دو نقطه مشکل دارم ، کارم فیکس در نمیاد. البته گارگاه ندارم توی خونه با وسایل ابتدایی کار میکنم
@@Saher0369 چشم. برا اونم یه ویدیو درست میکنم. هرچند که در نهایت با هر ابزاری هم که کار بکنید باید برای جزییات کار و دقیق شدن دست به مغار و سنباده و لیسه بشید و اون جزییات آخر رو تنظیم کنید. ولی چشم
درود بر شما .اگه ممکن ابعاد رو بفرمایید
اجالتا خدمتتون عرض کنم که معمولا دیواره‌ها رو من تمام شده روی ۷ میلیمتر میگیرن. چوب کف رو ۲ میل در نظر میگیرم. سوراخ گوشی‌ها رو هم من ۷ به ۸ میزنم. که گوشی‌های مرسوم عود توی بازار تقریبا رو این سایز هستن
🙏❤️
Hello Mansour! Wonderful work. I didn't understand what the red piece you made at the beginning was for? Was it just a template for cutting the sices of the Peg Box? Best wishes - Peter in Paris
hello brother. yes, that red piece is just a template
@@mansouroud Thankyou! slowly I'm watching all the videos - wonderful ( Peter in Paris)
I'm so happy that you liked it. It's my honor@@anepictree
استاد سلام روز بخیر. ببخشید عذرخ‌واهی میکنم فاصله سوراخ سیمگیر از سطح صفحه چقدر باید باشه که اکشن درست در بیاد. ممنونم
وقت شما بخیر. این موضوع بستگی به زاویه دسته و سطح گریف سازتون داره. منتها من اکثر عودهایی که دیدم سوراخ‌ها رو روی ۸.۵ تا ۹ میلیمتر از سطح صفحه زدن. البته نه همشون. خودمم روی ۹ بیشتر مواقع جواب گرفتم.کمتر که باشه معمولا مضراب زیاد به صفحه برخورد میکنه و سعی کنید اکشن رو با زاویه‌ی سطح گریف و بلندیش جبران کنید
🙏❤️
@@mansouroud بسیار سپاسگزارم از شما استاد خوب و با حوصله و معرفت
Ok
درود و سپاس فراوان
уи