Technically they have the technology to do this now using GPS, ILS, etc. all combined with an extremely powerful autopilot computer but itll in my view never be fully automatic should always have a set of two eyes on whats going on. It would make (in normal conditions) the job a lot less stressful for pilots who do lots of flights id think.
Actually I think this will happen sooner then you think fully automatic flying planes by computer without any pilots on-board. Reality is most crashes are because of human error where computers can't make those mistakes. It will be a slow transition first still have pilots on the flight deck but just watching computers fly then it will go down to one pilot in the cockpit then no pilots.
These videos from Baltic are the best! Pranis is a excellent instructor, controlled and measured... It would be a pleasure to learn to fly heavies from him... BTW, my father taught commercial helicopter pilot training for years, so I know competent instructors... Thank you!
There is a goof: When setting the flaps you can see on the ECAM that the FOB is 3480kg. But a second later the FOB is 2100kg. Anyway this is a very cool video. Thank you for uploading!
You can't do it exactly like this in the standard fsx planes bcuz they suck u need to spend 40 bucks on aero soft planes or watch perfectgamer30 where he showed u how to download it free
It's only used when conditions warrant, or depending on local rules. Also, most pilots will perform a full autoland just once in awhile to practice. It's always up to the pilot to make the final decision.
I have two questions : - 07:18 what is idle reverse? - In order to taxi to the gate you apply thrust as soon as you disengaged the autopilot on the ground right? Excellent video thank you
Engines of large aircraft produce some level of forward thrust, even at idle power, so reverse still needs to be engaged to cancel out this effect. Idle reverse is just that - "extended" reverse panels with engine power at idle.
Very well explained. For me it has been very useful since I fly the Airbus family planes in "Flight Simulator" and there were some things I still didn´t understand. Thank you so much :)
I'd like to see Pranas do a full flight in his Airbus 320.. From gate to gate... Mostly because I want to see if I'm doing some of the setup of FMS right especially for arrival.. For all departure.. I understand how to do the route that's no issue there.. I just find I can learn a lot from watching others do it & Pranas is pretty darn good with the Airbus.. :)
I’m jealous of these sophisticated autopilots. When I was flying, my ‘78 C172 didn’t even have a wing leveler. No GPS then. LORAN-C was the hot thing....didn’t have that either! 😆
@m7mad95 AP2 is autopilot 2. You press it when the copilot is flying. Autopilot 1 is engaged when the captain is flying. When on approach you press them both to make the autopilot more accurate. BRK FAN stands for brake fan. It does what the name states. It cools the brakes down.
Depends on the weight. I can see the outer wing tank are transferring so it's probably not carrying much fuel. 122 sounds fine for an empty aircraft on Flaps 4. The speed is reduced in a segmented manner to each flap setting, which is exactly what Pranas did. The autothrust is fully capable of reducing the speed in a controlled fashion to any selected value within VMO and VLS.
Pranas, why do the Boeing equivalents have so many flaps positions compared to the seemingly small number on the Airbus aircraft? In any case, Airbus avionics always seem to make it look so easy...
yeah watching the Airbus version of this and also the Boeing video on auto land the Airbus seems so much easier and simpler to use with less work to do
The reason is, the Boeing make their premade degrees. The Airbus uses a computer to create its own degrees based on speed weather and height and weight. airbus is all by computer..Boeing is all by captain.
this video was so helpful, I’ve been doing it wrong this whole time. This tutorial was so helpful as I undergo my training stages in my career that I’m finally taking somewhere. Now I can finally commute to my nearby McDonald’s so that I’m never late again
1. Tune the ILS freq. of the runway on the NAV1 radio. 2. As you approach the runway's general heading, click the 'App' button on the MCP. 3. The flight-director will show your deviation from the glideslope & course, but there will be no actual movement as the autopilot is off (if it is off, that is). 4. Finally, switch on the autopilot using the appropriate button and the aircraft will guide itself to land! These are general instructions for the stock FSX a/c. Search youtube for specifics. :)
Just a wonderful clip that makes it all sound so easy when in fact it isn't. When something goes wrong is when they earn not near enough for all the skill they have.
Plainly spoken both autopilots are the same thing, but they are using different data sources (like air data, flight director, etc). There is more than one basically for redudancy (in normal ops usually when the Captain is PF, they fly on AP1, when the FO is PF - they fly on AP2) and for when performing a CAT III approach (coupled data sources give higher precision)
awesome video. i have sim check in the coming month....so will be required to do circuits...one with 2 eng and one with one eng failure at v1.....i knw its easy stuff...but been out of flying since 3months.. so would be better if get a chance to get to see..when to do what stuff..thanks guys...keep it up u doing grt stuff for aviation community
That is an ILS approach you're thinking of I think. For a full autoland, you do not need or want to switch off the autopilot. All current tech aircraft with full autoland capability can perform all phases of landing, including final approach, flare, and rollout. In a full Cat 2 autoland, you only switch off the autopilot when you've decelerated enough to start looking for your taxiway to exit the runway :)
That's the problem with the old CRT screens. They are also heavy and get really hot. For many years now Airbus has been using LCD screens which are much better.
Oh! Thank you for your response. I have no question for now (because I am new on this.) At this moment I am learning from others people comments and I did not see the response for azert69ify or Leon B. so I was wondering where their answer are. I booked mark your home page so you’ll be hearing from me once I have meaningfully questions. Thanks again
+George Pierson airbus uses a fly by wire system that uses a joystick, located to the left of the seat, so the captain has it in his left hand and the copilot has it in his right
DH(decision height) and minimums are the same thing. Here it is set to 20 feet meaning the pilot must have the runway in sight at "minimums" callout to continue with the landing. If the pilot does not have a visual on the runway they must execute a go-around.
I'm not a pilot but when I saw this video I bought MFS on Steam games. It's fun to spend free time playing games. However, your video is my reference. Thank you.
rojamb And if the landing must be aborted at DH (Decision Height ) the aircraft will touch the runway and as the engines spool up the climbout is performed.
That is correct. Usually you can feel the difference as autoland is.. let's say less gentle. Also, if you are seated in one of the first rows you can hear the autopilot disconnecting from the flight deck.
Hi, would be nice if you can include the MCDU where you need to confirm the approach and maybe a focus where the localizer is intercepted on the Nav screen...
Far from it. And I am sure this aircraft was configured to be probably 75% full of passenger and cargo. These planes actually can go alot slower than I used to think.
If you'd looked up the published Cat 3 ILS approach to KLAX RWY 25L (the preferred emergency runway there), you'd see they have you intercepting the localizer and glide slope at either 3600' or 5000' when assigned by ATC. Not 10,000.
Hola Cordial Saludo, Lo Felicito, Excelente Vídeo, Muy didáctico, Gracias por compartir tus conocimientos de manera tan generosa. Saludos desde la Ciudad de Ibagué, Colombia.
@Nick V: Did you consider reading the question? Of course pilots have to know how to land the plane manually. In fact even with the technical possibility mosts landings are done manually. But landing with success in cat 3 conditions (ZERO vertical visiblitiy and 50 meters horizontal visibility) manually is next to impossible, because you can't see the runway until it is too late and you have possibly already created a nice crater. You win dumbest answer of the year, without any doubt.
Colaholiker Thank you. I asked this same question to an actual airline pilot yesterday and he said no, the plane must be flown on autoland. Thanks for pointing out who won the dumbest answer.
I'd be surprised if thy were required to land on autoland all the time, as they absolutely MUST be fit to do it manually any time, as long as the conditions allow it. (If conditions don't allow and for technical reasons autoland is not an option, they have to divert.) I would guess the percentage og how many landings must be manual or automatic can vary, but an "always autoland" policy seems as strange to me as the intention to attempt a manual landing in CAT3 conditions, unless there is really no other option.
Is there anyway you could attempt to show a full flight video of you flying the plane with a step by step walkthrough of everything you do? You can break up the flight into different videos too! I would love to see something like this in an A320
Depends on weight, but also elevation of airport, temperature, air pressure, length of runway etc. VRef is a tricky calculation on a flight computer, but thankfully pretty much done for you on modern airliners.
Normally all 3. Using full reverse thrust with just the mains down can get squirrelly, esp when there is a crosswind. It has to do with the sideways component of reverse thrust, which reduces directional stability.
In the A3** family the AP1 and AP2 decisions during app/landing are always compared one to the other. If they are different, the decision that provides the *least* movement is executed and AP disengaged. This is to prevent instrument error from causing, like, AP1 to think "I should really go full nose down at 100 feet" and nothing stop it.
Basically AP2 does exactly what AP1 does. They both essentionally monitor each other to add a level of redundancy. You could use just AP2 if you wanted, but that would not provide the level of redundancy required for a CAT3 approach.
A lot of the time an ILS approach will be used, but then the autopilot is switched off when they have runway in sight, or, when MDA or MDH is reached (minimum descent altitude, or minimum decent height). An MDA is a baro height, an MDH is a radar above ground altitude. Of course, if the A/C reaches minimums on an ILS approach in instrument conditions, and the runway is not in sight at that time, a missed approach is declared. (ICAO Annex 6)
sykkel boy vwhat are you bullshitting about? Gamers are weirdos that have no life just sit at a video game for 24 hours a day in their moms basement getting fat.
There are many more things to do in fmc...if u dont put the proper information in the flight computer nothing will work... u have to put the ILS frequency for the ILS to work. This video only shows the autopilot aspect of a320. Great video! I want to see a 747-400 simulator vdo...please make 1 if its possible!
Well, they recommend no more than about 1.3 - 1.4 EPR on reverse thrust. Something about too much reverse thrust can greatly reduce directional stability, not something you want to try on a wet runway... There was an accident long time ago at Little Rock where some pilots tried to land in a thunderstorm, were too busy pre-occupied with landing in bad weather, and forgot to arm the spoilers. They applied max reverse thrust, lost control, and the PIC died when the A/C hit the approaching lighting.
I am so jealous.. As a 911 dispatcher in NY, my only dream was to have been a commercial airline pilot but naturally, we all don't get what we want. I'm content helping save lives, but I so badly want to get flight time in a simulator-would be a dream come true!!! Whether 737 prefer or airbus, this would be amazing! I envy the instructor in this video who can do this all he wants, what amazing thing to learn and practice!! Back to my 911 lines now
Hey Eisa, I must say you are a little bit wrong on this one. Cat III is widely used and can be found in basically any big airport nowadays. The pilots must be rated and the aircraft have to be equipped for that, and very often they are. You can see loads of videos on youtube where a Cat III landing is performed in real life :)
If you are from the US like stated in your profile, than quite a few airports have Cat III in your country. The first one I looked at is JFK, and it has a Cat III on 4R-22L
Hello Baltic Aviarion, I`ve watching your videos for a few months now, and they are so great !, Im an Aviation Enthusiast, Best Regards from Costa Rica, Our Airport Code MROC.
Using this tutorial for FSX lol.
Update: 4 years later using this for MSFS 2020 lol.
Same bro
me too
Haha same
Haha X plane
same lol
finally a simple, precise and clear explanation.
Flaps 20 , gear down . and everthing happens automaticaly !
Im flying an A320 tomorrow for the first time. Don't know how id manage without this great youtube tutorial. THANK YOU!!
Good luck
how was the experience?
I want an autopilot that allows me to sleep until the plane has stopped.
Lmfao!!!
LMAO!!! :D
Technically they have the technology to do this now using GPS, ILS, etc. all combined with an extremely powerful autopilot computer but itll in my view never be fully automatic should always have a set of two eyes on whats going on. It would make (in normal conditions) the job a lot less stressful for pilots who do lots of flights id think.
THE SANDSEEKER U.K that's the future
Actually I think this will happen sooner then you think fully automatic flying planes by computer without any pilots on-board. Reality is most crashes are because of human error where computers can't make those mistakes. It will be a slow transition first still have pilots on the flight deck but just watching computers fly then it will go down to one pilot in the cockpit then no pilots.
Who is watching this for Flight Sim 2020? xD
I admit
Me. Did you get it to work? Because I didn't. At least not in the landing challenges. I'm going to try a manual flight now
me!
Gsonz me too because at least this guy knows what he is talking about, finally learning it the proper way, tonight gonna practice more :)
Yup! :D
Thanks Pranas - I've always wondered how they do that. One of the best instructor videos
These videos from Baltic are the best! Pranis is a excellent instructor, controlled and measured... It would be a pleasure to learn to fly heavies from him... BTW, my father taught commercial helicopter pilot training for years, so I know competent instructors... Thank you!
Great series of videos to use with Aerosoft's A320 series for FSX and P3D
Ben Bosley And FSLabs A320
K
now its relevant for XP11 A320 Ultimate lol
Recently purchased the Aerosoft A320/21 & love it. I've also been checking out these & other tutorials. It's work in progress🤣
ua-cam.com/video/SMg3J8IzdnM/v-deo.html
Wow. It's just so magical and beautiful that this massive hunk of metal and composites can labs itself so gracefully! Thank you for uploading!
There is a goof: When setting the flaps you can see on the ECAM that the FOB is 3480kg. But a second later the FOB is 2100kg.
Anyway this is a very cool video. Thank you for uploading!
Fantastic tutorials! You're a good instructor, Pranas! First rate simulators and demonstrations!
Always wondered how to do this on Microsoft Flight Simulator-now I know! Great job.
You can't do it exactly like this in the standard fsx planes bcuz they suck u need to spend 40 bucks on aero soft planes or watch perfectgamer30 where he showed u how to download it free
So do you know how to do it in msfs 2020? ;)
ua-cam.com/video/SMg3J8IzdnM/v-deo.html
This is great. I never knew you could learn piloting on UA-cam.
Thank you Baltic Aviation Academy
Pranas drulis sir u are explaining very good..your videos are very interesting.
I wish baltic aviation would hire you permanently for explaining us.
when did Michael Cera become a pilot?
It's only used when conditions warrant, or depending on local rules. Also, most pilots will perform a full autoland just once in awhile to practice. It's always up to the pilot to make the final decision.
It is easier than driving a car in Romania :)
LOL
:)))
Not a pilot but still I love to watch it. I'm a Cabin Crew. You're absolutely stunning with your details about everything. Thank you
Excellent introduction Pranas, although I've the PPL the step into heavy AC is not as easy
An excellent EIS1 Airbus simulator you have there. Lovely!
You are the Master Pranas.
Superb presentation. Clear, concise and accurate, and not in your first language...respect, sir, respect.
I have two questions :
- 07:18 what is idle reverse?
- In order to taxi to the gate you apply thrust as soon as you disengaged the autopilot on the ground right?
Excellent video thank you
Engines of large aircraft produce some level of forward thrust, even at idle power, so reverse still needs to be engaged to cancel out this effect. Idle reverse is just that - "extended" reverse panels with engine power at idle.
in the action i didn't see any difference with normal reverse. is there any specific button to push or something to pull?
Nope, no buttons. Reverse thrust has multiple positions: "reverse idle" and if you pull thrust lever further down into rev - "reverse thrust".
excellent thanks
Excellent, Pranas! Thanks for the truly outstanding instructions.
Very well explained. For me it has been very useful since I fly the Airbus family planes in "Flight Simulator" and there were some things I still didn´t understand.
Thank you so much :)
You can also play around with some MCDU trainers and learn to really setup the 320. You can find them via google for free :)
Pranas you are the best! hugs from Brazil! ✈
"Does anybody know how to fly a plane?!"
Ah.. Yes.
I do. Not an A320, although I would stand more chance than someone who has only ever flown sim programmes in an emergency.
Captain it was a pleasure flying with you.
I'd like to see Pranas do a full flight in his Airbus 320.. From gate to gate... Mostly because I want to see if I'm doing some of the setup of FMS right especially for arrival.. For all departure.. I understand how to do the route that's no issue there.. I just find I can learn a lot from watching others do it & Pranas is pretty darn good with the Airbus.. :)
The thing I love about watching these videos is that the guy explains very clearly and it is so interesting the way he does!
I’m jealous of these sophisticated autopilots. When I was flying, my ‘78 C172 didn’t even have a wing leveler. No GPS then. LORAN-C was the hot thing....didn’t have that either! 😆
LORAN C in a C172 lol, and why not...
I've been following this channel for quite a while, and I really like Pronas! He is very cool and he can explain things really well!
Another great vid by the drooling Prawn!
+jolly herb haha lol
He's not drooling.
Pranas, you are gonna be a great pilot. Anybody who will have you as an instructor, is lucky.
...do pilots learn how to fly planes off of youtube?
No
sim pilots can ;)
Virtual Pilots do learn from here.
737 Max pilots learn it through iPad course
@@PanduBiasramadhan that would be good they didn´t get no training at all for the new max version
@m7mad95 AP2 is autopilot 2. You press it when the copilot is flying. Autopilot 1 is engaged when the captain is flying. When on approach you press them both to make the autopilot more accurate. BRK FAN stands for brake fan. It does what the name states. It cools the brakes down.
Funny that he said "We are FIFTY MILES to the rwy" and he was at 2200 feet and getting the ILS signals.
Maybe he meant 15??
I would not trust him on a cessna 150 lol
Chris castella I thought I heard him say that too
He 15. Do you dont understand english? You're not a Pilot, right
Idiot.
Depends on the weight. I can see the outer wing tank are transferring so it's probably not carrying much fuel. 122 sounds fine for an empty aircraft on Flaps 4. The speed is reduced in a segmented manner to each flap setting, which is exactly what Pranas did. The autothrust is fully capable of reducing the speed in a controlled fashion to any selected value within VMO and VLS.
Pranas, why do the Boeing equivalents have so many flaps positions compared to the seemingly small number on the Airbus aircraft?
In any case, Airbus avionics always seem to make it look so easy...
yeah watching the Airbus version of this and also the Boeing video on auto land the Airbus seems so much easier and simpler to use with less work to do
The reason is, the Boeing make their premade degrees. The Airbus uses a computer to create its own degrees based on speed weather and height and weight. airbus is all by computer..Boeing is all by captain.
will lowe ahh that makes sense, thanks!
No probem mate. I love the airbus..great bird. Happy tail winds
will lowe cool. I also heard that the airbus auto retracts the flaps after takeoff when it reaches certain speeds, is this true?
this video was so helpful, I’ve been doing it wrong this whole time. This tutorial was so helpful as I undergo my training stages in my career that I’m finally taking somewhere. Now I can finally commute to my nearby McDonald’s so that I’m never late again
"So where did you get your licence from again?"
"Oh, UA-cam"
1. Tune the ILS freq. of the runway on the NAV1 radio.
2. As you approach the runway's general heading, click the 'App' button on the MCP.
3. The flight-director will show your deviation from the glideslope & course, but there will be no actual movement as the autopilot is off (if it is off, that is).
4. Finally, switch on the autopilot using the appropriate button and the aircraft will guide itself to land!
These are general instructions for the stock FSX a/c. Search youtube for specifics. :)
He Flies Bombardier Dash Q400 now!
What a change 😁
On board an A319 right now. Worst comes to worst, I’m ready.
Lol you’d never remember half of what he said nor in the right order lol 😂😂😂
@@Joe74854 I had it downloaded and still have it downloaded hahaha
Today I'm going to show you how to have a seizure...
Took me 10 minutes but i figured out your joke finally: hahaha.
Thanks for this excellent tutorial! Now I can easily set up for autolands in MSFS.
I love Pranas, no homo, but you can see that he loves what he is doing. He is the star of baa
reverse thrust he graduated along time ago
What do you mean "no homo"?
Wow this worked perfect on Flight Sim 2020!!! Thanks so much! The whole thing landed itself!
Just watching this in case I’m flying as a passenger one day and something happens to the captains and I need to find a way to get it on the ground 🤣
Your security details can do it for you if that happens, mr president.
I'm soooooo in love with this guy! ❤❤❤❤❤
2:25 where did you get 1 tonne of fuel in air?? lol
Magic
He was playing on Easy difficulty
He paused it and went into the payload menu
ua-cam.com/video/SMg3J8IzdnM/v-deo.html
air drop
Just a wonderful clip that makes it all sound so easy when in fact it isn't. When something goes wrong is when they earn not near enough for all the skill they have.
Who else is here trying to save hundreds of passengers after the pilot died mid-flight? P.S. what does it mean when it's yelling "terrain" at you?
Plainly spoken both autopilots are the same thing, but they are using different data sources (like air data, flight director, etc). There is more than one basically for redudancy (in normal ops usually when the Captain is PF, they fly on AP1, when the FO is PF - they fly on AP2) and for when performing a CAT III approach (coupled data sources give higher precision)
Thanks, love your vid's
A great video from a great Pranas!
Oh brilliant thanks! Both the pilots in my plane to London have fainted. Lemme handle this emergency landin.
Oh wait! Am on a B747!
Ik it's a joke but,
They're kinda similar so you could land.
DONT WOOOOSH ME
@@mimted2614 😂 They are so different
awesome video. i have sim check in the coming month....so will be required to do circuits...one with 2 eng and one with one eng failure at v1.....i knw its easy stuff...but been out of flying since 3months.. so would be better if get a chance to get to see..when to do what stuff..thanks guys...keep it up u doing grt stuff for aviation community
beautiful! i cant wait to be a pilot :)
hey are u a pilot now
@@barackobama743 😂
@@barackobama743 😂😂
Mate did you become a pilot now? If yes, congrats
That is an ILS approach you're thinking of I think. For a full autoland, you do not need or want to switch off the autopilot. All current tech aircraft with full autoland capability can perform all phases of landing, including final approach, flare, and rollout. In a full Cat 2 autoland, you only switch off the autopilot when you've decelerated enough to start looking for your taxiway to exit the runway :)
The flickering from the screen gave me a cancer. Great video though.
That's the problem with the old CRT screens. They are also heavy and get really hot. For many years now Airbus has been using LCD screens which are much better.
Wow you're hilarious because you used cancer as a joke
Wonderful video. Thank you for telling us these complicated-looking things in a such easy way.
I like the video but I don’t see any response or comments from Baltic Aviation.
Luis Medina Hey Luis, what kind of questions do you have?
Oh! Thank you for your response. I have no question for now (because I am new on this.) At this moment I am learning from others people comments and I did not see the response for azert69ify or Leon B. so I was wondering where their answer are.
I booked mark your home page so you’ll be hearing from me once I have meaningfully questions. Thanks again
Baltic Aviation Academy Airbus is recommended to make all landing with speed managed, but you have used speed select its not correct:)
+BAA Training Where's the control stick that pilots traditionally used?
+George Pierson airbus uses a fly by wire system that uses a joystick, located to the left of the seat, so the captain has it in his left hand and the copilot has it in his right
DH(decision height) and minimums are the same thing. Here it is set to 20 feet meaning the pilot must have the runway in sight at "minimums" callout to continue with the landing. If the pilot does not have a visual on the runway they must execute a go-around.
One question...why Reverse Thrust under 60knts though?
if using full reverse, the Airbus Rule:
70 kts Idle reverse
40kts Reverse completely off
you dont want engine ti throw debris into the inlet
I'm not a pilot but when I saw this video I bought MFS on Steam games. It's fun to spend free time playing games. However, your video is my reference. Thank you.
I am never planning to land a plane.
How did I end up here?
Just incase the 2 pilots on your flight fall asleep, here ya go!
felobatir moheb The Cockpit door is locked....
@@orgelfan1675 that was a joke dumbo.
Thank god... i've been landing my A320 manually on a daily basis. Now i can autoland. Thanks.
I've heard it's a fairly hard landing, not quite as smooth as when done manually.
Ye its mostly for a confirmed landing when your in Zero visibility. Lands hard to assume that its a wet runway.
rojamb And if the landing must be aborted at DH (Decision Height ) the aircraft will touch the runway and as the engines spool up the climbout is performed.
Yes, but its better than landing on the grass because you can barely see the runway.
That is correct. Usually you can feel the difference as autoland is.. let's say less gentle. Also, if you are seated in one of the first rows you can hear the autopilot disconnecting from the flight deck.
Hi, would be nice if you can include the MCDU where you need to confirm the approach and maybe a focus where the localizer is intercepted on the Nav screen...
120, that not staling the plane even with flaps on?
Far from it. And I am sure this aircraft was configured to be probably 75% full of passenger and cargo. These planes actually can go alot slower than I used to think.
***** well what if it's a boeing 737-800 ? what is the minimum landing speed on this plane sir ?
I have heard of empty planes landing at 105 kts
woow too slow :) thank you :)
LOL THAT FLAPS LOWER YOU STALL SPEED LOL
If you'd looked up the published Cat 3 ILS approach to KLAX RWY 25L (the preferred emergency runway there), you'd see they have you intercepting the localizer and glide slope at either 3600' or 5000' when assigned by ATC. Not 10,000.
when i think "automatic" i think "push button, automatic land and chill"
Yeah no it’s not really that automatic
Believe it or not Autolanding is more work than manual landing…..
Hola Cordial Saludo, Lo Felicito, Excelente Vídeo, Muy didáctico, Gracias por compartir tus conocimientos de manera tan generosa. Saludos desde la Ciudad de Ibagué, Colombia.
after i watch this, without a doubt, i can fly the airbus A320... really
For a student you're a very good teacher. Cool vid !
Do airline pilots have to know how to successfully land a plane manually in a cat 3 approach?
Duh! If you were a passenger, would you not want a pilot who knows how to land a jet manually? You win dumbest question of the year.
@Nick V: Did you consider reading the question?
Of course pilots have to know how to land the plane manually. In fact even with the technical possibility mosts landings are done manually.
But landing with success in cat 3 conditions (ZERO vertical visiblitiy and 50 meters horizontal visibility) manually is next to impossible, because you can't see the runway until it is too late and you have possibly already created a nice crater.
You win dumbest answer of the year, without any doubt.
Colaholiker Thank you. I asked this same question to an actual airline pilot yesterday and he said no, the plane must be flown on autoland. Thanks for pointing out who won the dumbest answer.
I'd be surprised if thy were required to land on autoland all the time, as they absolutely MUST be fit to do it manually any time, as long as the conditions allow it. (If conditions don't allow and for technical reasons autoland is not an option, they have to divert.)
I would guess the percentage og how many landings must be manual or automatic can vary, but an "always autoland" policy seems as strange to me as the intention to attempt a manual landing in CAT3 conditions, unless there is really no other option.
In Cat3 conditions they have to land with autoland.
Is there anyway you could attempt to show a full flight video of you flying the plane with a step by step walkthrough of everything you do? You can break up the flight into different videos too! I would love to see something like this in an A320
123 knots are a bit slow. isn't it?
+Itz Srexor [Pause] Depends entirely on the weight.
+Mads Frost yes. you're right
Depends on weight, but also elevation of airport, temperature, air pressure, length of runway etc. VRef is a tricky calculation on a flight computer, but thankfully pretty much done for you on modern airliners.
*Lucky* You're not Pilot, right? I love people without competence and a great mouse. ;-)
Normally all 3. Using full reverse thrust with just the mains down can get squirrelly, esp when there is a crosswind. It has to do with the sideways component of reverse thrust, which reduces directional stability.
why ap1 and ap2 ?
to ensure if one autopilot fails, the other will take control smoothly and rapidly
In the A3** family the AP1 and AP2 decisions during app/landing are always compared one to the other. If they are different, the decision that provides the *least* movement is executed and AP disengaged. This is to prevent instrument error from causing, like, AP1 to think "I should really go full nose down at 100 feet" and nothing stop it.
Basically AP2 does exactly what AP1 does. They both essentionally monitor each other to add a level of redundancy. You could use just AP2 if you wanted, but that would not provide the level of redundancy required for a CAT3 approach.
baltic01, exit runway when able, airbus a380 on final, thank you.
Baltic01 go around. Baltic01 go around. Air France JT062 exit runway immediatly via taxiway L on your left, Baltic01 is not responding and on final.
A lot of the time an ILS approach will be used, but then the autopilot is switched off when they have runway in sight, or, when MDA or MDH is reached (minimum descent altitude, or minimum decent height). An MDA is a baro height, an MDH is a radar above ground altitude. Of course, if the A/C reaches minimums on an ILS approach in instrument conditions, and the runway is not in sight at that time, a missed approach is declared. (ICAO Annex 6)
ALWAYS CHECK AUTOLAND FAIL LIGHT BEFORE AUTOLAND!
:)
+MinecraftSBCGaming your a gamer,what would you know?
+David Harris most gamers tend to know more about stuff than non gamers. When playing a flight sim ur kind of a gamer
sykkel boy vwhat are you bullshitting about? Gamers are weirdos that have no life just sit at a video game for 24 hours a day in their moms basement getting fat.
+David Harris wtf is your problem? Are you mad or something? Not all gamers get fat you fucktard get a life
+sykkel boy all gamers are fat Virgins everyone knows that
I really love your videos. Keep it up.
Very Excellent teaching method.. my brother.. Good
But I am not really sure what BRK FAN is. Probably a fan near the tires to stop then from overheating.
There are many more things to do in fmc...if u dont put the proper information in the flight computer nothing will work... u have to put the ILS frequency for the ILS to work. This video only shows the autopilot aspect of a320. Great video! I want to see a 747-400 simulator vdo...please make 1 if its possible!
Pranas on landing and stopping the plane on runway: That's it we're done now
Another plane coming from behind: Hey youngster you forgot something!!
Thanks, I’ve got no idea how to land this thing and my passengers are terrified rn lol 😅
Well, they recommend no more than about 1.3 - 1.4 EPR on reverse thrust. Something about too much reverse thrust can greatly reduce directional stability, not something you want to try on a wet runway... There was an accident long time ago at Little Rock where some pilots tried to land in a thunderstorm, were too busy pre-occupied with landing in bad weather, and forgot to arm the spoilers. They applied max reverse thrust, lost control, and the PIC died when the A/C hit the approaching lighting.
This is very very interesting movie!!!!!!
Million times thanks!!!!!!!!!!
I can now finally say that I learned to fly a plane from an 8 minute UA-cam tutorial
I am so jealous.. As a 911 dispatcher in NY, my only dream was to have been a commercial airline pilot but naturally, we all don't get what we want. I'm content helping save lives, but I so badly want to get flight time in a simulator-would be a dream come true!!! Whether 737 prefer or airbus, this would be amazing! I envy the instructor in this video who can do this all he wants, what amazing thing to learn and practice!! Back to my 911 lines now
Hey Eisa, I must say you are a little bit wrong on this one. Cat III is widely used and can be found in basically any big airport nowadays. The pilots must be rated and the aircraft have to be equipped for that, and very often they are. You can see loads of videos on youtube where a Cat III landing is performed in real life :)
Thanks Pranas, awesome training :)
If you are from the US like stated in your profile, than quite a few airports have Cat III in your country. The first one I looked at is JFK, and it has a Cat III on 4R-22L
So what is Pranas doing these days? All these vids are great. Has he completed training? Working for an airline?
Hello Baltic Aviarion, I`ve watching your videos for a few months now, and they are so great !, Im an Aviation Enthusiast, Best Regards from Costa Rica, Our Airport Code MROC.