OMG!!!!!! I was stuck all day with no remedy as to why my machine was not stitching the fabric. I watched this video after watching endless videos for 2 days straight. This is the only video that said thread the needle from left to right. I tried it, it fixed my issue! That's all it was and I am so thankful and amazed. THANK YOU SO MUCH FOR THIS VIDEO!!!!!!!
I liked how you showed the oil bath. I think newbies will be shocked to see the oil bath on the industrials. That was great how you even showed the oil that you use. Thanks! The light colored rest for the machine when you rock it back is called a post.
Babe that magnet needs to go in the oil compartment it is to catch any broken needle bits and stop them from being pumped into the machine via the machine pump x bless u
Hiya great video, I’ve just got my new juki machine and I was wondering if I could ask your advice?. The back of my stitches aren’t looping properly and I’ve tried adjusting the tension, the bobbin tension, the stitch length etc. But nothings really working if you have any suggestions on what could be the problem I would be grateful 🙏
🙋♀️ Hi Tammy. can you please do a video on how to slow the power down? Im starting a new job soon and will be using this and im embarrassed to ask my new boss to get maintenance in and slow it down for me. The last person who was at this job 30 yrs has been using it at full speed and im just not sure if I can do the same speed comfortably😢. Is there a way to get it slowed down by my adjusting it myself 😕
Hi, does anyone know how to add a speed reduce onto a DL-8700 Juki? I need a manual or instructions. The digital program doesn't slow it down enough for the precision curves I need to sew.
Do you have an industrial machine? The belt might be broken or misaligned which is why it’s not working. In that case you’ll either need to put it back in place or replace it. But please turn off your sewing machine while you’re checking!
OMG!!!!!! I was stuck all day with no remedy as to why my machine was not stitching the fabric. I watched this video after watching endless videos for 2 days straight. This is the only video that said thread the needle from left to right. I tried it, it fixed my issue! That's all it was and I am so thankful and amazed. THANK YOU SO MUCH FOR THIS VIDEO!!!!!!!
Aww really glad this helped. It’s a small detail but really makes all the difference when you know! 😆
You did a great job showing us how to use it. Thank you.
I liked how you showed the oil bath. I think newbies will be shocked to see the oil bath on the industrials. That was great how you even showed the oil that you use. Thanks! The light colored rest for the machine when you rock it back is called a post.
A post! really good to know, thank you! 😆
You're a genius my dear, good tutor and I hope you still bringing more tutorials for us.
May the good God bless you.
@@VincentPietMazibuko Amen, thank you babes
If I were younger this is the machine I would buy.
I like the picture on cushion on top of the machine. Very good video.
Thank you ☺
I'm just bought a Kingstar Dy -370 a week ago, still struggling with few things.
Babe that magnet needs to go in the oil compartment it is to catch any broken needle bits and stop them from being pumped into the machine via the machine pump x bless u
Thank you! that's super helpful to know! I've gotten so used to using it for my mini thread clippers and I'll probs continue that way 😆
@@ayeshakhan6169 You mean a round ring magnet
Thanks so much for this video.. your explanation got me to understand better.. I appreciate your video.. thank you once again.
Much appreciated, glad it helped you 🥰
Precise video!❤
Thanks a lot for these info
Thank you, glad you found it useful!
Hiya great video, I’ve just got my new juki machine and I was wondering if I could ask your advice?. The back of my stitches aren’t looping properly and I’ve tried adjusting the tension, the bobbin tension, the stitch length etc. But nothings really working if you have any suggestions on what could be the problem I would be grateful 🙏
I think you're missing a step in the threading part or the the thread in the bobbin is on the wrong direction
Thank you for the info I have problem the bottom side tread not nice
Fairly complete and lovely accent :)
thank you darling 😘
🙋♀️ Hi Tammy. can you please do a video on how to slow the power down? Im starting a new job soon and will be using this and im embarrassed to ask my new boss to get maintenance in and slow it down for me. The last person who was at this job 30 yrs has been using it at full speed and im just not sure if I can do the same speed comfortably😢. Is there a way to get it slowed down by my adjusting it myself 😕
Hi Rita, thanks for leaving a comment. I've just uploaded a video answering your question! So check it out and good luck at your new job!
Really like this video, thank you
Glad you found it useful :)
Hi, does anyone know how to add a speed reduce onto a DL-8700 Juki? I need a manual or instructions. The digital program doesn't slow it down enough for the precision curves I need to sew.
Hi, here's the tutorial on how to reduce the speed: ua-cam.com/video/69lsRXuhW_A/v-deo.htmlsi=CsGd2QVVD708aYNs
Am a beginner and just bought Vesta it is good and I need to learn how to use it can you help please
Hi there , thanks for the video. Do you mind writing the table measurements please as i want to be sure if it's gonna fit in in my space ?
42.5 inches wide
32 inches high
22 inches deep
Thanks for replying , I do appreciate
Hi.. Nice vid. Make more vids showing the foot pedal control. Have a nice day.
Thanks! Hopefully I'll get to it one of these days :)
@@tammy_silverthat's nice. I'll wait for. Have a nice day!
@@carlostavares2596 Hi! I have a new video up that explains the foot pedal control a bit more :)
Thank you very much!
The one I got is JUKY , hope they’re the same ? 😮
I have no idea 😂 it might be another brand trying to copy JUKI. But if it’s an industrial machine it will work in a similar way
@@tammy_silver thank you ❤️
Can you please help me out🥺I got a new sewing machine my motorbelt is not moving
Do you have an industrial machine? The belt might be broken or misaligned which is why it’s not working. In that case you’ll either need to put it back in place or replace it. But please turn off your sewing machine while you’re checking!
Thanks
Hi did this machina can titch zig zig I want to repair a thin dress like a flying paper 🪁
This machine can only do a straight stitch :)