HONDA CX500 TRACKER BUILD PLAN!! EP 2
Вставка
- Опубліковано 16 жов 2024
- Honda CX500 Build outline and plan! This CX500 is going in a tracker direction with upright bars and more comfortable riding position. This video is a quick walkthrough of the overall build plan and end goals on the CX500/650 tracker. Lots of parts ready and lots on the way. This bike is getting a Cognito spoke wheel set, digital dash, rearsets, GSXR forks, custom exhaust, and even a 650 engine! Follow along for more!
Rear shock info PLEASE READ:
This is a Ducati 900ss rear shock and I chose this based on the eye to eye design, overall length, position of the adjustment points, and reservoir position. You notice that I put on a new spring because the original is TOO SOFT! I knew this going in. The red spring is 850 lb/in rate and was determined by Racetech using their geometry calculator linked below. You will have to contact them directly to determine what spring is best for your application.
Racetech website:
racetech.com/i...
Geometry sheet:
racetech.com/d...
Front forks:
This bike came to me with these forks and it turn out they are a mix of components which caused problems later in the build. The basic components are sourced from a 2005 GSXR1000. Only some conversion bearings are needed to fit it to the bike. From there you need to fabricate steering stops and other things for full integration. I show all of these things in the videos.
Visit the Brick House Builds social media pages for daily content!
Facebook - / brick-house-builds-108...
Instagram - istagram.com/brickhousebuilds/
Website - www.brickhouse...
#brickhousebuilds #caferacer #cx500