WE GAMBLE £2000 ON A DAMAGED 2018 POLO BUT IS IT A WIN OR FAIL ???
Вставка
- Опубліковано 6 гру 2022
- We took a gamble on a crash damaged VW Polo but is it a win or a fail ??? #salvagerebuildsuk and we are always on the lookout for new #projects
Click here if you would like to buy us a coffee :- www.buymeacoffee.com/SalvageR...
USE CODE :- SR10 for 10% discount on your Car Vertical Check. Get 10% off car vertical with this link bit.ly/SalvageRebuilds
Instagram if you have a vehicle :- salvagerebu...
Instagram for Chris and his holidays, museum visits and classic cars:- / salvagerebuildschris
SRUK Cleaning kit www.jennychem.com/discount/SA...
For all sponsorship, Business /media enquiries please email :- rebuildssalvage@gmail.com
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Engine and Mechanical repairs , #Restoration and Structural repairs on the Celette Jig .
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , #Repairs , Salvage , #Restorations , Will it run , Will it Start , #Fail , #Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , NON Running , Banger ,Flood damage , insurance write off , #fire damage , electrical fault , #stolen recovered , Unfinished #project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , MGF , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab - Авто та транспорт
Chris keeps me highly amused with his understatements and pragmatism ... "Yeah, it's crept up that one, hasn't it". Another entertaining episode, thanks.
Hi Rob & Chris, I've been using those connectors for a couple of years, you're right they're brilliant, never given me any problems.
The tracking showed how perfectly the car was rebuilt! Top jobs lads
The idea behind the red rings in the heat shrink solder joints are to hermetically seal the silder joint from water etc. I have used similar in the RAF for years to rapir cables ...we use a heat shrink gun with a curved air deflector attachment to give all round heat so you get uniform shrinkage.
The little rings on the ends of your solder sleeves are environmental seals, to keep moisture out of the solder joint. They're great devices, just go easy with how you apply the heat on pvc-jacketed cable as the cable insulation can melt before the solder. I also would tin the wires before fitting the solder sleeve to avoid a dry joint. Very handy little things; I use loads at work (not cars).
I use those connectors quite a bit, if your joining a bunch of close wires
I use a wide blade metal scraper and place it under the wire I’m working on to avoid melting others around it!
Hard to look at the original damaged car to what you guys finished with. Shows how good Chris is at repairing with the tracking so close. Top job guy's, hopefully it will be sold soon and on to a new home.
Heatshrink solder sleeve connectors widely available on ebay. Also recommend Lidl Parkside heat guns when they have them on sale - wide range of temperature control with LCD display and lots of accessory tips so safer to use in tight spaces.
Great to see the before picys again as it's easy to forget how bad some of the cars are. Great job gents.
Damn those parts where expensive full face lifts on rare models have really pushed prices sky high happy for you both that you will be able to make a profit out of it & looks fantastic 👍👍👍
Hi chris, we use those solder splices in the aerospace industry. I use them daily. Good enough for a typhoon great for a polo. Dazza
When you make electrical joints, stagger them along the loom so you don't get a big lump when you tape over them. Use self-amalgamating tape as it will survive the weather better.
I am always astounded by you in-depth knowledge of salvage . Best channel on UA-cam by far.
not even the pros can tell you have repaired it, just goes to show the quality of the work you guys do !! another one saved .
thanks for the content guys
Usual perfection with a totally focussed attention to detail. Really tasty parts bill. A really lovely, low miles Polo. Form a queue guys. Glad to see a decent margin coming out of it for you👍😎
Haha the little cheeky grin when walking to front of car that’s the best feeling when you get things fixed 👍🏻👍🏻👍🏻
Hi Rob, great episode as normal. As an aside when in-line splicing multiple cables it’s best practice to stagger the joints if you can it saves ending up with a big lump in the cable and protects against possible issues further down the line.
A really good repair to the Polo, you have made it as good as new. Even the professionals could not detect that it was repaired. Regarding the heat shrink and solder joints, I use them for harness repairs which are exposed to the weather. They are really good if used properly.
Nice and easy end to this one. Love the heat shrink for the wiring, will certainly look for them when I need to do wiring again. At least you managed to keep your hands warm doing that 😂 what a cracking little runabout 👍🏻
yeah those little solder heatshrink things work well
I use those connectors all the time, they are brilliant
Those red rings in the heatshrink solder is adhesive. It makes the connection watertight. Good stuff with the polo
The parts total escalated quickly 😮
Still a cheap enough thing at £9k though, another quality repair 👌
Look at how lovely this turned out definitely a win 👀
Rob and Chris, great work! Especially those solder heat shrink! Always a pleasure watching!
Great example of you guys going the extra mile to get the right parts for a project. Great stuff.
Evening Guys. What a lovely Polo. I was trying to add up as you were talking doing the number and was as shocked 😮 as you both were. But a fantastic end result and a lovely little car for someone’s Christmas 🎄present 😄
Lovely job Guys parts are costly would you do another one 👍
Well done Rob, you got stuck in on this one.
congrants ,we do not miss any of your videos ,we are so far from you ,in Uruguay south america ,regards
Rob one thing to try with the heat shrink solder joints is to stagger them on the loom so you don’t end up with a large bump in the loom under the tape
The solder joint repair things are brilliant I’ve used them so many times, another good video and another good car, well done 🍺🍺
Cars like new guys, professional repair and rebuild as always,no corners cut in this garage,well done guys
Rob, when mentioning Chris’ Instagram you should mention an outrageous thing Chris MIGHT get up to, (a bit like Top Gear did with the Stig), eg hang gliding naked down Snowdon, being a magicians assistant, or talking about being a Scrabble grand master, etc. Could be a fun way to end each video. Well done on the car - looks good.
That will make someone a nice little car,well done lovely job as always.
Used to work on RAF Tornado fighters and we used those sorts of solder sleeves on the aircraft wiring, really good for hermetically sealing inline crimps
I used those heat shrink solder connections 43 years ago in the RAF. So long as both ends are tinned they work a treat.
Microphone sounded epic at the end!!!
Hello Rob and Chris, I used these 'solder shrinks' every day in my old job repairing looms on cherry pickers. I have even successfully repaired canbus looms with them, never ever had one fail. Much more reliable than soldering and a bit of electrical tape!
The Polo looks like brand new Rob!
Quality rebuild as always Rob,we never doubt your work! :D
Great to see before & after at the end.
I must add when a garage does the tracking make sure the device on the steering wheel is fitted on to make sure the steering is straight.
I had mine done once and it was all in the green on the screen like in this video, but there was no device on the steering wheel and when i drove away after he finished, the steering wheel was slightly to the left when going in a straight line.
I had to go back to get it redone and he got it right the next time round.
You're like a well-oiled machine, Rob. Nice work on this one.
Those connectors are great - Renault used to sell them in the crank sensor repair kits.
And those VW Center caps - I too bought some off eBay and last week tried to fit them - very tight!!
Good evening Rob and Chris, what a transformation.
That was one hell of a parts list.
Thank you for taking the time to upload another video. Ged.
I wondered if those easy solder joints were any good. Now I know. Thanks guys. Superb job as usual.
I have not seen those little joiners before and I am getting old! They look like a quick fix certainly if you don't do soldering. I was doing a thumbs up when the lights came on then I laughed realising of course that you can't see me! At least I followed your saying ' let's get involved'. That car is almost like new now with the low mileage and unrecorded. I think that is a fair price and a profit so well done to you both for another top repair. Thanks Rob and Chris for another great video.👍👍
Another great turn around guys, cracking little Polo all sorted for someone to grab a quality car at a bargain price 🙌
Another great job guys - and the mics are working well at last 😊
Another cracking job lads! That car's gonna make someone very happy.
Rob - there’s an attachment that fits on the end of the heat gun that spreads the heat all the way round those connectors, makes life easier when using them, it should have come with the gun. Great job as always
Well done guys. Always nice to see a car returned to MINT condition, especially a POLO. 😁😁
Lovely job. Expensive but well worth it. Cheers, Bob
I have been using those solder fittings for years,I always stagger the repair,but they are very good,get mine from RS Northampton
Lovely workmanship again guys
No bodge with these guys just a proper job well done lads.
Those heat shrink solder sleeves are mustard! I find the wind proof lighters work as well as a heat gun. Great to see it all back together.
Hi Rob, I mainly repair these new shape Polos, do you have a trade account with TPS? I find most the genuine parts are pretty reasonable, and cheaper than main dealer, especially things like the fog lights, front wings etc. They also stock the 3pin connectors you needed for pennies.
Sometimes not worth the time searching for used parts.
Anyway, great video as always 👍
Got the exact same connector ripped off on mine, will try them solder joints!! Also that radiator support grill cost me £20.45 before VAT from TPS, shopped around for most other parts, even got the bonnet in colour £130! 😂
I’m not a fan of VW’s but this is a nice little car. Top work! It’s cars like this that catch out the man doing it himself on his drive. A bargain can soon go down the pan if you need to load the parts canon.
It is amazing how all the small amounts add up to one big one
That is a lot of money but at least a profit still in it 👍👍
We had those solder joints at Citroën back in the 90's, there should be an heat gun nozzle adapter available for those connectors too mate 😊
Very nice results gents, and a good series, albeit an expensive one. You will still come out with a good profit, and someone will get a very nice car.
Always enjoy your projects and I thank you for keeping us entertained and engaged.
Another cracking video guys. The Polo came out well, says enough when your tyre guy made those positive comments. Looking forward to the next one!
Great job guys and have great and pleasant holidays enjoy your quality time with family friends 😊. Good luck
Really pleased you have got that one finished it Looks like new
Well done Rob with the solder connection's you can buy them to fit all sizes and if you don't have heat a disposable lighter work's just as good 👍
perfect audio. very nice to listen to. thank you
VW do make some nice cars, but they have become awfully overrated among other brands.
It turned out nice in the end, but you had a challenging, not to mention expensive hill to climb to get there. Hopefully, you will get the money you are asking for the restored and honour will be served. It turned out to be a bigger gamble than expected one way and another, but if anyone could turn it round, you two could achieve the right result.
Another informative post guys, when you went through the numbers rob it made me realise why I shy away from special edition cars they always seem to be more expensive and a nightmare for parts as you just pointed out, really enjoyed the post and already looking forward for Fridays post
I used the heat shrink connectors on my internal van lights 2 years ago no problem as yet
I've used those electrical connectors when refurbing my son's Westfield. Brilliant idea. Quick, easy and simple.
I've been working on bikes and cars for many years now. What you guys do is incredible, much respect from me here in Lincolnshire.
Good job , love this shape of polo had a reef blue r-line cracking car
Those connectors are brilliant and waterproof. The red ring at each end is a sealant adhesive . Used in aircraft many years ago .
Another great video lads, Things don’t be long adding up, I had a similar experience with a Mini recently, The price & availability of dealer parts is shocking! Keep up the great work, Happy Christmas from Ireland.
Wow looks amazing rob n Chris. Worth more like 10
As u dint count going to parcel force a few times.nice to hear u both on the 🎤 mics.great video again guys. 👍.
Fantastic. So good the solder connectors .
That picture of when you bought it; nasty!.
Nice car, now.
Hello Rob and Chris,what a awesome turnaround on this VW Polo,to how it was before,the postal strike makes everything late.
That’s the first and last time you chaps do a car with that spec.
Great result guys, a staggering overall figure to fix
It up but well worth it. Brilliant hack Rob on that three pin socket you needed for that front DRL.
On to the next one.
Those heat shrink things look really cool, thanks for sharing that :)
Thanks for the mention Rob, those connectors are ace! Andy.
Lol it wasn’t you bud
Those new mics are the dogs danglees... Thank you!
Great wk as always Rob & Chris.
Lovely car guys. The before and after pics show the amount of effort you both put into repairing the vehicle.
It’s still a cheap car. Low mileage, well sorted, and in lovely condition.
Nice one gents, and an interesting series of videos. The body repairs by Chris were a real pleasure to watch.
Someone will get a very nice little car.
Cheers gents….
wow what a transformation,thankyou gentlemen,,👍👍👍,im sure your happy to see the back of this one cost wise and sourcing the parts😌😰
Same I did a Jcw mini 2017 and it was crazy the cost of parts was 2x the cost of the car never again lol you have to be so careful with newer stuff
you got one of the center caps upside down mate. :P
Been using those heat shrink solder joints for 10 years👍🏻
Just brilliant work yet again from the dynamic duo. Well done guys. 👍👍👍👍👍
I would of thought 10k would've been a better price for that car with all the work you both put into it? Ended up lovely though boys. 😎👍
Another cracking little motor you fellas have turned around again someone will be well chuffed when they buy it 😀. Parts pricey but you get what 😳 you pay for, great video 📹 👍 as usual fellas. Take care and stay lucky and healthy looking forward to Friday's video 📹 😊 as usual.
Another one saved and expertly done ! 👍
Clever fix great job Rob and Chris, great work
Off to work to do late shift , at least I get to enjoy this part of the evening first !
Nice video I really like those new solder joints 😊
Another one sorted.Nice wee profit too.On to the next one.
Another sorted guys well done . Scary how the bottom line turns out on some projects.
That Polo was a parts nightmare Rob! But you came out on the right side.
Royal Mail are a disaster. I switched broadband supplier on the 23rd November. They sent my new fibre router out on the 30th on a 48 hr tracked service. The switch was scheduled for today (7th) but the router has not arrived.
So I am now using my 'phone as a 4G hub (as the old supplier has terminated their service of course) after buying a Wifi dongle until the Royal Mail decide to do their jobs.
Great build this one, bit unlucky with the harder to find parts but glad you have some profit, really nice clean car for someone
Great little Polo, well done - amazing how the price creeps up though !