Introduction to color correction in Nuke for compositors and artists | with

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • I will show Grading basics in Nuke for Photographers and Artists. We will be opening Nuke, Lightroom and Da Vinci to show some basic concepts like Highlights, Mid Tones, Shadows, Primary Colour and Secondary Colour Correction. This video is sponsored by ‪@AQCOLORbyBenQEurope‬ and ‪@BenQEurope‬
    Support Hugo's Desk by buying some products from my Amazon UK Storefront (all earned commissions go to the running of the channel): www.amazon.co....
    #nuke #compositing #grading

КОМЕНТАРІ • 191

  • @HugosDesk
    @HugosDesk  5 місяців тому

    To celebrate springtime my Nuke compositing courses are 60% Off until the 1st of April. This is the biggest discount ever! Don’t miss this offer. Use the promo code SPRINGSALE during checkout: hugosdesk.myshopify.com/discount/SPRINGSALE
    Two courses are available to buy:
    Nuke Compositing course:
    👉Access to 150 classes (already available, extra classes dropping soon)
    👉More classes soon!
    👉50+ hours of training
    The Workshops course (pre-order):
    👉Real Production Workshops (some classes already available. More classes dropping in 2024)
    All courses include:
    👉Student license path available (paid separately)
    👉Showreel material (200GB+)
    👉Private Discord (2000 students)
    👉Fully endorsed by @TheFoundryTeam
    I hope you can join our amazing community of 2000+ students.

  • @damascenoalisson
    @damascenoalisson 7 років тому +41

    Before watching: Oh man 1 hour, seriously?
    After watching: Every second was worth it, I want more!

    • @HugosDesk
      @HugosDesk  7 років тому +3

      +Alisson Damasceno Ha ha ha, sorry, next time maybe I should split the full video. Could be easier to watch I think. Thanks so much for watching. If you want to get my videos before everyone else check out my Patreon. There are 2 new videos there. www.patreon.com/hugosdesk

  • @briansmallwood4095
    @briansmallwood4095 3 роки тому +18

    Thank you Hugo! In my 20 years of Compositing, I have never seen someone describe these concepts in such and clear and relaxed manner. You have helped me break some bad habits and am I looking forward to more! #mustwatch

    • @HugosDesk
      @HugosDesk  2 роки тому

      Thanks so much for your kind words. Much appreciated.

  • @ZeusCreates
    @ZeusCreates Рік тому +3

    I feel like I finally understand the logic and science behind color grading! You explained the math going on behind the scenes very well! Super well-made tutorial!!

  • @riccardobancone3761
    @riccardobancone3761 7 років тому +8

    I can't believe that I discovered this channel only yesterday... Great!

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +Riccardo Bancone Thanks so much for the support. Means a lot to me. Don't forget to support the channel in Patreon if you can. A donation to keep the channel going is always appreciated. Thanks

  • @ikbenikHD
    @ikbenikHD 6 років тому +2

    This video was over in a blink, i couldn't believe i was watching for 1 hour. Thanks for giving us ALOT of insights at this topic! The different scope views are a nice addition in understanding the total picture :D Obrigado!

  • @Alohamora_13
    @Alohamora_13 7 років тому +2

    Thanks Hugo! This definitely has been a great help to understand the basic and simple concepts of grading and color correction. Really looking forward to watching your Color theory and Colorspaces video!

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +Viduttam Katkar Thanks so much. Glad you liked it. I would hope more people supported the channel in Patreon. It would help me to take time off of my work to make more tutorials. Thanks for the support.

  • @johnneTEE
    @johnneTEE 2 роки тому +1

    Great information here. I'm adopting the term "Software agnostic". Really helped me understand more the colorcorrection note

  • @NelsinhoSouto
    @NelsinhoSouto 4 роки тому +5

    I can’t believe I found this channel only 2 weeks ago best channel ever. I’ll soon work for u ;) write down my words ;) cheers.

    • @HugosDesk
      @HugosDesk  4 роки тому

      Thanks so much for the kind words. And thanks for being a Patreon. Much appreciated it. Obrigado 😊

  • @andresfelipegrajalessalas8524
    @andresfelipegrajalessalas8524 7 років тому +9

    1 hour of happiness thanks so much hugo!
    I am your big fan from Colombia jaja
    Thanks Thanks Thanks Thanks so much hugo!

    • @HugosDesk
      @HugosDesk  7 років тому

      +Andres Felipe Grajales Salas Thanks so much for the support. It's always tricky making long videos. Some people really don't like long videos so. Maybe I should have split it up or made a short subject.

  • @suzisantos957
    @suzisantos957 2 роки тому

    TNice tutorials is one of the best intro soft softs I've ever seen. The entire basic worksoftow with no B.S.!

    • @HugosDesk
      @HugosDesk  2 роки тому

      Thanks so much for watching and saying that. Much appreciated

  • @polyshader2435
    @polyshader2435 7 років тому +4

    This is amazing! I've been looking for a tutorial that teaches these principles of grading and not just specific software. I don't mind the length at all, I would happily sit through 5 hours of this. I would love see more things like this!

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +alexanderwurts Thanks so much for the kind words. Always worried about time since people only usually see the first 10-20 mins according to the stats on UA-cam. If you want to have access to content early and some exclusive. Support me in Patreon: www.patreon.com/hugosdesk

  • @izaakpardey9615
    @izaakpardey9615 4 роки тому +4

    Thank you so much you legend. That was a super amazing tutorial!!!

    • @HugosDesk
      @HugosDesk  4 роки тому

      Thanks so much for watching. Happy new year 🥳

  • @ShiroiAkumaSama
    @ShiroiAkumaSama Рік тому +1

    Even though I use Natron this was super helpful for my problem, thank you very much.

  • @fangtooth4471
    @fangtooth4471 4 роки тому

    Even now, props to ppl teaching on UA-cam, I do follow & support a lot of channels related to my field. Your videos are still, hands down...or up..the best technically explained :)

  • @IamJohnnyFan
    @IamJohnnyFan 3 роки тому +1

    Thank you for sharing your creative wisdom Hugo!

    • @HugosDesk
      @HugosDesk  3 роки тому

      Thank you for watching my video

  • @balajisampath8863
    @balajisampath8863 2 роки тому +1

    I love this tutorials. thanks a lot

  • @roshannaik4258
    @roshannaik4258 4 роки тому +1

    Thank u.. This wonderful tutorial..
    Please make more about colour greading..

  • @vipulhamirani4927
    @vipulhamirani4927 4 роки тому +1

    Thank you..... Hugo's Desk
    Thank you Benq

  • @kamireddymalakondareddy7193
    @kamireddymalakondareddy7193 3 роки тому +1

    Thanks Dude

  • @donjuni
    @donjuni 4 роки тому +1

    Muchas gracias Hugo; he aprendido mucho con tus tutoriales. Thanks so muchos Hugo, I've learned with your videos.

  • @niranjanyadavny
    @niranjanyadavny 2 роки тому +1

    Really great and so much informative in every step. this is pure knowledge, great to watch your videos.. would to live to watch them again and again to sock in more of it. thanks :)

  • @renosnicolaou8417
    @renosnicolaou8417 5 років тому +2

    Hugo, this is amazing explanation of all time. Thanks brother for the best explanation I ever seen.

    • @HugosDesk
      @HugosDesk  5 років тому +1

      No problem, I am glad you enjoyed this.

  • @merrymonad5295
    @merrymonad5295 7 років тому

    It's amazing how with all your huge experience and extended knowledge you still manage to stay consistent and simple. Many thanks from Ukraine! :)

  • @agustinvillanidesign
    @agustinvillanidesign 3 роки тому +1

    Great tutorial!!

  • @CJGaikwad
    @CJGaikwad 5 років тому +2

    Love your videos bro, really helps juniors to gain more knowledge!

    • @HugosDesk
      @HugosDesk  5 років тому

      Thanks so much for watching. Make sure to share.

  • @Bart1260
    @Bart1260 Рік тому

    Thanks Hugo!! This was VERY useful tutorial again! A lot of small but powerful tricks and hints!

  • @UmeshKumarprajapatiVFXworld
    @UmeshKumarprajapatiVFXworld 4 роки тому +1

    I was searching for this kind of tutorial. Finally I got it. Thankyou thankyou and thankyou. Its best.

    • @HugosDesk
      @HugosDesk  4 роки тому

      Thanks so much for watching. Glad you enjoyed it

  • @ronydey2696
    @ronydey2696 4 роки тому

    Great CC stuff tips it's much helping to understand that matters sir

  • @emmanuellerivard756
    @emmanuellerivard756 4 роки тому

    Thank you so much! Loved it! I like the idea of ''software agnostic''. Can't wait to drop it in a conversation, haha!

  • @BronicB
    @BronicB 7 років тому +1

    So awesome! Thanks so much Hugo!

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +Bronic Bednarek No problem. Thanks for the support.

  • @AlwaysDrawing2012
    @AlwaysDrawing2012 4 роки тому +1

    Excellent tutorial! Thank you!

    • @HugosDesk
      @HugosDesk  4 роки тому +1

      No problem, it’s getting old, I need to make a sequel with ACES some day

  • @madysonbearry460
    @madysonbearry460 3 роки тому

    Excellent video, thanks a lot 🙏🏾🙏🏾❤

  • @venkatvennu2298
    @venkatvennu2298 6 років тому

    Thank you sir.
    great tip of using radial and glow thank you sir and looking forward for more tutorials .............

  • @hassanmourad4966
    @hassanmourad4966 3 роки тому

    Thank you, Great explanation

  • @Adventure494
    @Adventure494 7 років тому +1

    Thanks Hugo! Very helpful...looking forward for more Nuke stuff! 😄

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +EFXCO TRAINING & CERTIFICATION CENTRE Thanks so much. More to come next week. Hope you are doing well. Miss you mate.

    • @HugosDesk
      @HugosDesk  7 років тому

      Thanks so much for the words mate, hope all is going well with the school. Don't forget to support the channel in Patreon. A single $1 a month can help me keep the channel running. Thanks so much: www.patreon.com/HugoCGuerra

  • @jamessenade3181
    @jamessenade3181 7 років тому +1

    thx for sharing this Hugo i am not real nuke user ( actually flame user ) but your content are always Gold for me. thx a lot .Obrigado

    • @HugosDesk
      @HugosDesk  7 років тому

      +James Sénade Thanks so much for the kind words. It is true, most of this can be done in any app really.

  • @LibreLobo
    @LibreLobo 7 років тому +1

    Great video as always! Very informative. Thank you!!

    • @HugosDesk
      @HugosDesk  7 років тому

      +Miguel M. No problem. Thanks

  • @bush9686
    @bush9686 7 років тому +1

    thanks for your hard work and sharing knowledge.
    great!

    • @HugosDesk
      @HugosDesk  7 років тому

      +Lesha You are welcome. More coming next week.

  • @Qbanpensil
    @Qbanpensil 7 років тому +1

    Great videos.I really enjoy the way you teach this stuff.

    • @HugosDesk
      @HugosDesk  7 років тому

      +Joan Sariol Levy Thanks so much.

  • @siddharthvasisth4050
    @siddharthvasisth4050 7 років тому

    Superb I have never seen this detailed tutorial of grading else where, I would love to see you making a tutorial on matching foreground with background

  • @blackpanda1302
    @blackpanda1302 4 роки тому +1

    Nice video very helpful

  • @matteoboni5976
    @matteoboni5976 3 роки тому

    just thanks hugo

  • @charlieorcharles
    @charlieorcharles 7 років тому +1

    This is just what i was looking for, great stuff thank you :)

    • @HugosDesk
      @HugosDesk  7 років тому

      +Charles Dockerill Glad I could help.

  • @matintorabi7051
    @matintorabi7051 7 років тому +1

    Thank you very much Hugo.
    In just one hour you managed to answer a lot of questions that I'm sure many people like me had for a long long time.
    Looking forward to the second part to this tutorial. I hope we can see more videos like this soon.
    please let us dive deeper...
    by the way you mentioned a problem with nuke's default scopes, would you care to explain more?

  • @whippet_boy8594
    @whippet_boy8594 5 років тому +1

    Really clear tutorial, thanks.

    • @HugosDesk
      @HugosDesk  5 років тому

      Thanks so much for watching

  • @ktyto33
    @ktyto33 4 роки тому +1

    You are amazing! I love you hahahaha Tks a lot! Best Tutorials ever!! Muuuito obrigado!!

    • @HugosDesk
      @HugosDesk  4 роки тому +1

      Thanks so much for your kind words

  • @nehasandhu8110
    @nehasandhu8110 7 років тому

    Thank you so much for this huge information. Very useful

  • @carinnagarcia2301
    @carinnagarcia2301 6 років тому +2

    Awesome tut! it feel so short, although it lasts an houuur

    • @HugosDesk
      @HugosDesk  6 років тому

      Haha, I am glad you liked it. Keep an eye on my Patreon for new videos. Thanks

  • @mizxe24
    @mizxe24 4 роки тому

    thank you so much!

  • @sohamdutta9612
    @sohamdutta9612 7 років тому +1

    awesome as always

  • @vfxhomie8141
    @vfxhomie8141 7 років тому

    Thank you for this. You are a great teacher.

  • @Pavan_Dinkar
    @Pavan_Dinkar 4 роки тому

    hey i started watching your tutorials..thats have very good information for compositing...thankyou for that..but i want to start learning about videography or cinematography.....my mean is pleas make one tutorial on camera setting for video shots..means colorspace,fps,size,aspact resio,file formats that's need for post porduction.whn we will compose it..i hope you understanding..you are providing very good knowledge keep going❤❤❤❤❤❤❤❤❤❤❤❤❤

  • @devapradhan2965
    @devapradhan2965 6 років тому

    Thank you for sharing your knowledge sir

  • @igorbohonsky
    @igorbohonsky 7 років тому +1

    Omg, 1 hour, Great work! Thank you.

    • @HugosDesk
      @HugosDesk  7 років тому

      +igor bohonsky Glad you like it. Some people don't like long ones. Sorry about the length. I just had so much to say on this. It is really 2 videos. A introduction to grade and then a quick workshop grade at the end.

    • @igorbohonsky
      @igorbohonsky 7 років тому +1

      do you know any method to improve edges? (Card>Alpha>Premult>Zdefocus.)

    • @HugosDesk
      @HugosDesk  7 років тому +1

      You mean doing DOF in the 3D system of nuke or with CG in general. With CG in general check this out:ua-cam.com/video/TkrbmaZoUSQ/v-deo.html&list=PLw7TZXbFAyfdHFSt5KTZf5zbMNavdYBVQ&index=7

    • @igorbohonsky
      @igorbohonsky 7 років тому

      really helpful. Thank you i solve my problem, Thanks again

  • @shivas4831
    @shivas4831 7 років тому +1

    Thank u Hugo...

    • @HugosDesk
      @HugosDesk  7 років тому

      +Shiva Krishna Thank you for the support.

  • @davidholder1769
    @davidholder1769 4 роки тому +1

    That was a super amazing tutorial! Thank you so much !! unfortunately the registration for your Nuke Compositing course 3.0 is closed, I hope there will be more !

    • @HugosDesk
      @HugosDesk  4 роки тому

      Thanks. If you want you can still signup to our 'slacker' campaign. We will launch in a few days. Just message me on social media privately we let's talk. Cheers

    • @davidholder1769
      @davidholder1769 4 роки тому

      @@HugosDeskOk, I wrote you in Patreon

    • @davidholder1769
      @davidholder1769 4 роки тому

      @@HugosDesk Hello Hugo, to sign up for the section, where do we send you a message?

  • @cobblesticks
    @cobblesticks 7 років тому +1

    Great tutorial again, thanks. I use Nuke at work, but for other personal projects it would be great to use Nuke too for similar Grading purposes. Only got Final Cut to use which is fine, just don't have all the toys I usually have in Nuke, so can't do the Sharpening, Glows or Masks etc. as well or as easily as I can in Nuke. I don't know After Effects, Fusion or Da Vinci. So moral of the story is, I wish Nuke was affordable. Thanks.

    • @HugosDesk
      @HugosDesk  7 років тому

      +cobblesticks Thanks so much for the words. Glad you like the video. I wish The Foundry would make a subscription based model for Nuke. Everything else is so would be great if they would do that.

    • @cobblesticks
      @cobblesticks 7 років тому

      Hugo's Desk Yes. I agree but I have a feeling your wish may be granted in the near future. Keep up the great work Hugo.

  • @michaelgibson2142
    @michaelgibson2142 5 років тому +2

    This is the most well explained color grading lesson I've seen. I finally feel like I understand the grade node. Thanks!
    Can you share what your set up is to run Scopebox? I'm missing something and can't find any documentation.

    • @HugosDesk
      @HugosDesk  5 років тому +1

      Thanks so much for the kind words. Means a lot to me. Scopbox and Nuke can be used in 2 ways. A single Blackmagic card with SDI in/out and use it to loop the signal back to the machine. Or you can get 2 seperate cards, one for IN and one for OUT. My sugestion is to use a laptop or smaller machine just for the scopes so you don't use CPU/GPU power in the machine you worrking on. You know what I mean?
      I personally use a Blackmagic Decklink Mini Monitor 4K PCI inside my main workstation to preview SDI 10-bit or HDMI 2.0 HDR. Then I use another card, this time a Decklink Mini Recorder 4K connected to another machine (a old Mac Mini server 2010) to "ingest" the signal to the ScopeBox software. This way ScopeBox, a pretty heavy software, is using the Mac Mini CPU to process the scopes in reatime, in fact this Mac Mini is only used for Scopes and as a ITunes server. Leaving my main workshtation free from having to deal with Nuke/Davinci, etc and ScopBox at the same time.
      Maybe I should make a video about this...

    • @michaelgibson2142
      @michaelgibson2142 5 років тому

      Thanks for breaking that down! You're the best!

  • @saeedzare2410
    @saeedzare2410 5 років тому

    Thanks for sharing such a useful info.

  • @ivan_v_videos
    @ivan_v_videos 7 років тому +1

    As always A m a z i n g! Thank you so so much!

    • @HugosDesk
      @HugosDesk  7 років тому

      +Ivan Vivas Thanks mate

  • @allandm
    @allandm 7 років тому +1

    Thanks again! Great stuff! Brigado. :)

    • @HugosDesk
      @HugosDesk  7 років тому +1

      Thanks so much for the kind words. Don't forget to support the channel in Patreon. $1 a month can help me keep the channel running. Thanks so much: www.patreon.com/HugoCGuerra

  • @ramonmartinez7613
    @ramonmartinez7613 5 років тому +1

    Thanks Hugo :)

    • @HugosDesk
      @HugosDesk  5 років тому

      No problem. Thanks for watching

  • @pablo-zn1mg
    @pablo-zn1mg 6 місяців тому +1

    hugo thank you so much for making this video !
    I was having so much trouble understanding the grade node and other color correction tools in nuke and now I have a much clearer picture.
    is there anything remotely similar to a 'Levels' adjustment layer from photoshop in Nuke ?

  • @olalekanaleem456
    @olalekanaleem456 5 років тому +1

    This is Gold!

  • @vikaskaushalrajput6464
    @vikaskaushalrajput6464 6 років тому

    Thank you for this valuable lesson..

  • @twifeedo
    @twifeedo 7 років тому

    Extremely useful! Thank you for sharing your knowledge :)

  • @cg-school
    @cg-school Рік тому

    great tuto and clean English

  • @bhushanmali2988
    @bhushanmali2988 7 років тому +1

    thnx so much..its a very helpfull

    • @HugosDesk
      @HugosDesk  7 років тому

      +Bhushan Mali Thank you

  • @RaphaelMatto
    @RaphaelMatto 5 років тому +1

    Thnx dude, super helpful!

    • @HugosDesk
      @HugosDesk  5 років тому

      Thank you so much for watching.

  • @PawelGrzelak
    @PawelGrzelak 4 роки тому +1

    This is actually a great tut.

    • @HugosDesk
      @HugosDesk  4 роки тому

      Thanks for saying that. Cheers

    • @PawelGrzelak
      @PawelGrzelak 4 роки тому +1

      @@HugosDesk Hey Hugo, is there a direct continuation to this tutorial somewhere?

    • @HugosDesk
      @HugosDesk  4 роки тому +1

      @@PawelGrzelak Well I guess that's my Nuke course on Kickstarter, it's 100 hours of this! The campaign is over now but I will be back next year

    • @PawelGrzelak
      @PawelGrzelak 4 роки тому +1

      @@HugosDesk Found it. It's huuuge! It's probably not targeted at me since I am a 3d guy, who wants to use nuke for fast comps of my non-commercial works.
      That introduction video was perfect. I see you have some videos for fast comping of 3d and I am definitely gonna check them out. Thanks for sharing quality content!

  • @cloudgold1
    @cloudgold1 5 років тому +1

    love this..thank u so much!

    • @HugosDesk
      @HugosDesk  5 років тому +1

      Thanks so much. Glade it helped. I am always worried these videos are too long.

  • @AbdoAchtioui
    @AbdoAchtioui 6 років тому +1

    Thanks for the great tutorial

    • @HugosDesk
      @HugosDesk  6 років тому +1

      No problem. Check out my other tutorials.

    • @AbdoAchtioui
      @AbdoAchtioui 6 років тому

      Sure! i will take a look in my free time :)
      Check out my portfolio:
      be.net/Abdo-achtioui
      artstation.com/artist/abdo-achtioui

  • @fretstain
    @fretstain 3 місяці тому

    thank you for this video Hugo
    1)when would you use gain vs multiply if they essentially do the same thing?
    2) how would control the fall-off of using lift (like a toe)? I'm coming from a photoshop background so I would set points in the curve to limit the area the lift affects. I guess I could do this in the colorlookup node but I'm curious what the workflow would be for something like the grade node? would you essentially have to use lift in combination with gamma/multiply to preserve the upper values? Or would you just use colorcorrect for that?

  • @akinlis
    @akinlis 6 місяців тому +1

    your explanation was so clear and understandable that i had to come back and look for your profile..........please how can i learn more from you

    • @HugosDesk
      @HugosDesk  6 місяців тому +1

      Thanks so much for your lovely comment. I’m doing live streams every Thursday so come by and hang out on the chat.

    • @akinlis
      @akinlis 6 місяців тому

      @HugosDesk I will be there every Thursday, please what's the West Africa time for the live stream?

  • @smartyarts
    @smartyarts 5 років тому +2

    Just to make it clear, the exposure node is mathematically different from the grade's node gain! Gain is linear, exposure is logarithmic. In Lightroom the exposure node clips the blacks when moved to the left as you can clearly see in the histogram, the white triangle is the indicator. Oh and by the way you did not mention the midtones/gamma adjustment in Lightroom, where is it?
    Nevertheless good tutorial... kind regards

    • @HugosDesk
      @HugosDesk  5 років тому

      Thanks for that. Always forget this. I am so used to using fully linear softwares like Nuke that I sometimes forget I am not in Nuke, lol

  • @vineetvm4485
    @vineetvm4485 6 років тому +1

    Great man its help me lot

    • @HugosDesk
      @HugosDesk  6 років тому

      Here to help. Thanks

  • @VictoriaFilmsgroup
    @VictoriaFilmsgroup 6 років тому +1

    could you show us the most important thing hollywood movies achieve: the hipass effect where the edges are extremely well defined, how do they do that?

    • @HugosDesk
      @HugosDesk  6 років тому

      Sure, but not sure it's only that treatment that makes Hollywood films look good. There are plenty of factors to make that possible. But thanks so much for the great suggestion. I can put that in my list of upcoming tutorials. Thanks for the suggestion.

  • @TheBobLemmon
    @TheBobLemmon 7 років тому +1

    Hi Hugo, great video as always, very interesting !
    Is there a way to find a playlist or a website with all the "private video" you might have uploaded ?
    I'm scared I might have miss some awesome stuff ! Thanks

    • @HugosDesk
      @HugosDesk  7 років тому +1

      Thanks so much mate. Glad you liked it. This video will be unlisted for 1 month since it is a exclusive to BenQ. I will be listed later in the month. Thanks

  • @AhmedAmmash
    @AhmedAmmash 7 років тому

    35:18 you make color balance by grade node
    it's working fine but I think you must down multiply to 0.5 because when you balanced by black and white level its make footage more brighten
    and please, I want to see episode about color space and color management in nuke and davinci to understand this point
    and don't miss aces color management
    thanks +Hugo's Desk

  • @ReinOwader
    @ReinOwader 4 роки тому +1

    Very good explanation, but I didn't agree with color correction logic with that actor in corridor scene. I think when background window was blown out it didn't pull my attention as much as now when detail is visible in window. Lighting that face was OK. I tested on myself several times - at first my attention goes to actors eyes, and then immediately to window. But very good tutorial nevertheless. I even got courage to buy Benq monitor thanks to you. At first it was unknown brand for me.

    • @HugosDesk
      @HugosDesk  4 роки тому +1

      Thanks for watching. Well this video is about showing The basis of grade. The creative part is completely open for interpretation. Everyone would have their own creative opinion about how to grade and approach that shot I think.

  • @bkdsn
    @bkdsn 7 років тому +2

    Great video. Very informative.
    Do you have a workflow for 3:1 compressed raw dng files from blackmagic cameras (URSA mini pro). Nuke won't read them natively so I'm currently converting them to exr in Resolve, but the file size doubles and I have to run all my footage through Resolve first.

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +Bart Kuczewski I never use nuke to convert the RAW files. DaVinvi processes the files correctly. If you convert in nuke overall image quality is much worst. More blurry and without the dynamic range. I should make a video to show you guys.

  • @Headlantern
    @Headlantern 3 роки тому

    Hi! Really appreciate for the great tutorial!
    May I ask the 'PlogLin' in Colorspace in Read node? I have heard Slog 1/2/3 is log-curve that Sony uses, but I can't find any information of PlogLin.

  • @satyammishra1736
    @satyammishra1736 Рік тому

    Sir please can you make one tutorial about obj Texturing like elements 3d in nuke 🙏

  • @arifulislamsunny2992
    @arifulislamsunny2992 4 роки тому +1

    Awesome tutorial, thank you.
    A question, Without Nuke's vectorscope, how can I use a vectorscope? Is there any 3rd party application available?

    • @HugosDesk
      @HugosDesk  4 роки тому

      Yes there is but you would need a video card like a Blackmagic Decklink ti output and input a signal. I have used this with great success: www.divergentmedia.com/scopebox Alternatively you could get hardware scopes like these: www.blackmagicdesign.com/uk/products/smartview/scopes

  • @po0okie
    @po0okie 5 років тому +2

    I am curious, is there any specific reason you do not use Nukes built in waveform and vectorscope? Whats the difference between using nuke's versus the setup you have?

    • @HugosDesk
      @HugosDesk  5 років тому +2

      I use them sometimes. Here is a couple of reasons: They are very low resolution compared to real scopes. They also don’t playback in real time. Last thing, I use multiple applications so it’s easier to move from app to app and ‘see’ the same scope. Example, moving from Nuke to Nuke Studio to DaVinci and FCPX.

  • @factsduniya3193
    @factsduniya3193 4 місяці тому

    sir kindly provide some practice footage

  • @FraYoshi
    @FraYoshi 3 роки тому

    It's curious how on the internet, Color Correction is defined as the correction of what has been captured in camera and Grading the feel you get from a certain colorization..
    instead on Nuke it works the opposite!
    Who is wrong in this?
    Referring to the part at the 18:35 th minute.

  • @monocore
    @monocore 4 роки тому

    I just moved from AE. Everything is somewhat intuitive so far, and the OCIO workflow is way, way way way easier.
    Now, I cannot deal at all with color in nuke. Jesus christ I fall short so quick.

  • @naifox1
    @naifox1 4 роки тому

    What is the best making color correction Davici Resolve or Nuke ?

  • @kerklunk
    @kerklunk 7 років тому +1

    Hi Hugo, can you explain how you got ScopeBox to work with Nuke? Divergent says they don't support it directly. thanks

    • @HugosDesk
      @HugosDesk  7 років тому

      +Andrew Coleman Of course. I use a blackmagic Mini Recorder with SDI to feed the image to a separate Mac Mini. This machine is only running Nuke BG rendering and Scopes. I found using the same Mac Pro to run both SDI in and OUT was too taxing on the CPU. Maybe I should do a video about my setup. Many have asked.

    • @kerklunk
      @kerklunk 7 років тому

      Yeah, def would be interest to see.

  • @joojosart7772
    @joojosart7772 4 роки тому

    So you do this process before every shot you are working on and than render the final composite with your primary color correction before giving it to the client?

    • @HugosDesk
      @HugosDesk  4 роки тому +1

      This video is to show basics of color correction it’s not a VFX pipeline video. VFX should always be done to in processed footage. So the CG lighting, HDRs and textures match the plate. Color correction is always done after. Thanks for watching

  • @benmoqbel9516
    @benmoqbel9516 4 роки тому +1

    what is the name of the vector scope that you are using ?

    • @HugosDesk
      @HugosDesk  4 роки тому

      I am using the Blackmagic SmartScope Duo 4K www.blackmagicdesign.com/uk/products/smartview/techspecs/W-HDL-07

    • @benmoqbel9516
      @benmoqbel9516 4 роки тому

      Woow thank you so much 😘😘😘

  • @HugosDesk
    @HugosDesk  7 років тому

    Do you like this tutorial? Want to see more? Support my channel in Patreon for $1 and have exclusive timed access before everyone else. Don't miss out: www.patreon.com/hugosdesk

  • @picosdrivethru
    @picosdrivethru 3 роки тому +1

    nuke vs resolve for color grading cgi?

    • @HugosDesk
      @HugosDesk  3 роки тому +1

      Resolve is much faster but only up to 16 bit, Nuke is much much slower but more precise and 32 bit float! They are very different! For grading as a colorist, go DaVinci, if you have time, Nuke is a good option!

    • @picosdrivethru
      @picosdrivethru 3 роки тому +1

      @@HugosDesk thank you master :)

  • @BernardoAmorim
    @BernardoAmorim 7 років тому +2

    so litle views. damm it the world is upside down on youtude. this video is full of usefull tips.

    • @HugosDesk
      @HugosDesk  7 років тому +1

      +Bernardo Amorim Ha ha ha, maybe I should film my cats in the next video. Lol

    • @BernardoAmorim
      @BernardoAmorim 7 років тому

      Yes maybe. If you can comp them into a shakira kardashian video clip. I would bet they would definitly go way above 5million views....

  • @moifat8113
    @moifat8113 2 роки тому

    das ist ja aber sehr meggggggggggggggggggggggga

  • @mister-f313
    @mister-f313 2 роки тому +1

    XD

  • @kleindavid9416
    @kleindavid9416 4 роки тому

    Great tutorial, but the shot looks ... not so nice at the end

    • @HugosDesk
      @HugosDesk  4 роки тому +2

      Well, I am teaching the nodes and I did it on the fly without really thinking too much about it! Anyway, follow the tutorial and make your own shot with the same principles!

    • @kleindavid9416
      @kleindavid9416 4 роки тому

      @@HugosDesk Alright, alright, just could not leave out the oportunity to be an asshole and criticize a great and free tutorial :D

    • @HugosDesk
      @HugosDesk  4 роки тому +2

      @@kleindavid9416 Haha, it's ok! I am used to it! I work with clients! haha. Anyway, that shot isn't' that great to begin with!

    • @kleindavid9416
      @kleindavid9416 4 роки тому +2

      @@HugosDesk Shit, I got compared to a CLIENT! What a shame! And yes, the shot was difficult...

  • @VictoriaFilmsgroup
    @VictoriaFilmsgroup 6 років тому

    me i just wanna know what s so flatterring about mentioning maths among vfx people, this is an insult to maths

    • @HugosDesk
      @HugosDesk  6 років тому

      Not really sure what you mean? Compositing is basic math. What do you mean?

    • @VictoriaFilmsgroup
      @VictoriaFilmsgroup 6 років тому

      Hugo's Desk i mean that there is no math in there unless you call for example a news article as literature... anyway waiting your reply about the edges thing

    • @HugosDesk
      @HugosDesk  6 років тому

      Well, I will have to disagree. All operations in Nuke are math based. In fact, you can do complex math calculations using code or python inside Nuke (and on many VFX applications), in fact, I have many colleagues working in the VFX industry that has a math degree. They use their math skills in Houdini making simulations or even to make complex VFX shots possible.

    • @VictoriaFilmsgroup
      @VictoriaFilmsgroup 6 років тому

      Hugo's Desk the most complexe operations you might have are multiplying or adding values between 0 and 1... tell me what maths is that?... really.