Honda CB360 Cam Chain Tensioner Replacement
Вставка
- Опубліковано 12 лис 2014
- www.common-motor.com
Cam Bearing Journal Failure Explained: • Honda CB360 / CL360 Ce...
Cam Chain Tensioner Recall Explained: • Honda CB360 / CL360 Ca...
The cam chain tensioner has been the weak point of the Honda CB360, CL360, and CJ360 family of motorcycles for years. It was in fact recalled in the early CB/CL360 bikes. In this video, we show you step by step how to change your old tensioner and the cam chain guide to a brand new set while giving you tips and tricks to look out for to get you back on the road and riding as safely as possible.
Cam Chain Tensioner Kit: www.common-motor.com/honda-360...
Three Bond (Hondabond 4) Gasket Sealer: www.common-motor.com/Honda-Bond4
Honda CB360 Cam Chain: www.common-motor.com/honda-36...
CMC Chain Breaker / Assembly Tool: www.common-motor.com/chain-br...
If you have questions you can always contact us for help at www.common-motor.com - Авто та транспорт
Ordering these parts soon, thanks for taking the time to make this video! Best one ive found yet.
Gotta say, that was a great vid, good angles, great info and well edited. I'm starting out on a cb550 4 and need to replace my cam chain tensioner and bolts so my education starts here on UA-cam-subscribed! :)
Great video!
Excellent thanks.
Per the CB360 Cam Tensioner Update/Supplement to the Honda Service Manual, the top of the cam chain tensioner should rest just below the upper surface of the cylinder head, where in this video, it appears to pop out 8-15mm above the surface of the head with some "springiness" to it. Is the lowering of the cam chain tensioner by use of a push bar tool not shown in this video?
Thanks Brendan, great video. Looking forward to the next one!!
Thanks again!!!!
Do y’all have a video on replacing the Tensioner arm?
Awesome!
9:50 what do you mean the tensioner could be cocked? my cam tensioner doesnt seat properly as it will not snap back like your does. tips?
Can you guys do one on a cb350 motor? Thanks!
I'm new to your channel,only just found it, it's great to see these bikes being used, i had a 250 G5, where do you find them all ?
A lot of people confuse cam covers with valve covers ;)
Well done. I need to do this on my 1974/550CB. Do you ship parts in Canada?
Sir please make video honda cb 175 supersport.enginr rebuild.
How am I supposed to remove the cam and not disturb the timing. I have to replace the head gasket and I don't want to mess up the timing.
Guys I need a big help. For the ones that knows the Honda CB400N Superdream: do I have to put the engine down to replace the cam chain tensioner? Is there a way to remove it by only removing the head cover and not to split in two the lower engine? Thanks
Brendan , Loved the video on cam chain tensioner . Could you tell me if you can loosen up on the tension to make it easier to install the guides. I have a 1976 cb 360t and the cam chain tensioner isn' removable.
you adjust it
thank you for this great video. I just got a non running b75 cb360t. I'm not sure if tensioner failure was the culprit. is there a way to tell if this work has already been done? if the chain tensioner failed, what should I look for?
Great question. I have a CL360 I'm wondering if this needs to be done also. Did you ever get a response?
If the work was done, there will be a punch hole by the VIN number. Symptom of the issue is a loose sounding chain while running, that can't be resolved by tightening the chain tensioner.
Brendan, any tips on removing the cam chain without having to split the case?
You could cut the chain but that's about it. The new one would need to be cut and then re riveted together. I wouldn't recommend it though.
Can someone please tell me the production number of CB and CJ 360T's in 1976. ??? I looked everywhere except Japan
Due to their high volume we are not usually able to offer support to customers through our social pages. Please contact us via our website www.common-motor.com for more information.
Dear Brendan I live un Mexico city is it posible to get the set, how much
does it cost being sent to Mexico? I need at least an used set mine are broken. Thank you in advance
Jose F. Barrera Yes Jose we ship to Mexico. You can buy the part directly off the website:
www.common-motor.com/honda-360-cam-chain-tensioner
does this work on a 76 honda cb360t?
MidasZ yes it applies to all the Honda CB360 engines
I went to replace mine and it was snapped in half I wonder if i have to worry about engine damage?
I'd swap it outbutton the engine up and see if it runs. Watch our other two videos on tensioner recall explained and the center cam bearing journal.
HI I HAVE A HONDA CL360 1974 CAN YOU TELL ME HOW TO SET THE CAM TIMING. THANKS
Wow, that street in the intro looks familiar. Is that Houston? Is that near the Rothko Chapel?
yup, it is! That's Menil Park.
Cool, I lived for 10 years at 3814 Mulberry, before the Menil was built.
way to clean
Should never have gone into production like this.So weak R and D.Apart from disc brake and maybe 6 speed box,cb350 was far superior.Standard shockers were crap also.Worked on lots of both models back in the day.Sometimes rockers were pitted at 10k.
Found the same thing.Terrible motor.Camshaft,rockers tensioner just crap.