How to change front shock absorber on VW TRANSPORTER 4 (T4) [TUTORIAL AUTODOC]
Вставка
- Опубліковано 16 жов 2024
- How to change front shock absorber on VW TRANSPORTER 4 (T4) 2.5 Minibus 09.1990 - 06.2003 [TUTORIAL AUTODOC]
Shock absorber on VW Transporter / Caravelle T4 Minibus (7D, 70X) (09.1990-04.2003) VW Transporter T4 Platform/Chassis (70XD) (10.1992-04.2003) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock absorber: KYB; MONROE; BILSTEIN; STARK; ASHIKA.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Shock absorber: www.autodoc.co...
Shock absorber for VW TRANSPORTER T4: www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️ The tools you need to replace pollen filter:
wire brush
WD-40 spray
copper grease
combination spanner No.17
drive socket No.18
drive socket No.21
wheel impact socket №17
ratchet wrench
torque wrench
tap wrench
crow bar
vice
hydraulic transmission jack
wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW TRANSPORTER T4 car repair tutorial - • VW TRANSPORTER T4 car ...
► How to replace front wheel bearing on VW TRANSPORTER T4 - • How to change front wh...
► How to replace Engine Oil and Oil filter on VW TRANSPORTER T4 - • How to change oil filt...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
UA-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...
![How to change front suspension arm on VW T4 TRANSPORTER [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/6PXjOalLokQ/mqdefault.jpg)
⚠ Attention! The mistake was made in the video at 4:33 minutes. The tightening torque is 160 Nm, not 80 Nm. We are sorry for the inconvenience.
Very helpful 👍
I love that ratcheting breaker bar!
Have a look at other videos on our channel:
🔸 VW TRANSPORTER T4 car repair tutorial - ua-cam.com/play/PLWep5LzT0sxmsjGRfdNu8mxqznGNvbhTL.html
🔸 How to replace rear suspension front upper arm on VW TRANSPORTER T4 -
ua-cam.com/video/6PXjOalLokQ/v-deo.html
🔸 How to replace front wheel bearing on VW TRANSPORTER T4 -
ua-cam.com/video/J_vq8pZZ_wQ/v-deo.html
🔸 How to replace Engine Oil and Oil filter on VW TRANSPORTER T4 -
ua-cam.com/video/viJI6vsFo6c/v-deo.html
🔸 How to replace fuel filter on VW TRANSPORTER T4 - ua-cam.com/video/yxmYmQ3MOjA/v-deo.html
The torque settings in this video are a lot less than all the manuals I've reviewed. Could you double check them and update the text? Thanks.
Also my T4 and all manuals I've seen have no washer on the lower shock bolt, why does your demo vehicle have one?
Thank you for your comment.
We will take this into account in the following videos.
Unfortunately, the answer to your question is not possible.
The washer was installed before us.
Best Regards,
Autodoc team.
very good......thank you
Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc!
Can anyone say what are the correct torque values, for both front and rear suspensions? or where i can look for it? ( i dont have the manual) thank you
The correct torque settings (according to VW service manual) are : 25Nm (not 45) for the small upper nut ; 100Nm (not 52) for both the nut and bolt securing the upper mount to the chassis ; 160Nm (not 80) for the lower nut.
Don't rely on the numbers on these videos and always double check ! (Also they have a weird fetish for copper grease)
Hi! Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of a car maintenance service.
Washer cups for the top rubber bushes were put on differently to how they were taken off .
Thank you for your valuable clarification! We understand that mistakes were made during the replacement on this video and we are working on them and we will not make them in our new videos.
AUTODOC
👍👍👍👍🍺🍺🍺🍺
He's spraying copper grease over spray, all over the disc! 😳
Врх !
☺☺☺☺☺☺😚😊😁
Safety warning! 🛑Wrong wheel bolts torque! Should be 160 Nm till 12/1995 and 170 NM from 1996 !
You are right, some moments in the video were missed, but our channel is not educational but is only for informational purposes.
We strongly recommend that all replacements, especially those relating to the brake system, be carried out exclusively at a specialized service.