How to Replace Antenna Base & Mast Assembly 00-07 Ford Focus
Вставка
- Опубліковано 1 лип 2019
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/115/g/radio-antenna
In this video, 1A Auto demonstrates how to remove and replace the antenna on a 00, 01, 02, 03, 04, 05, 06, 07, Ford, Focus
This process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o7P/1AXAA00013
• Phillips Head Screwdriver 1aau.to/o7P/1AXAA00013
• T25 Torx Driver
Subscribe: / @1aauto
Check out our playlist:
Ford Auto Repair Videos: • Ford Auto Repair Videos
Ford Focus 2000-2011: • Ford Focus 2000-2011
Ford Focus 2000-2004: • Ford Focus 1st Generat...
For More Info visit us at 1aau.to/h/bIg/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I love your videos. You all explain every step that’s needed and you all speak very clear.
I’m a very handy girl and have replaced many things on my little 2003 Ford Focus…
This demonstration is ideal and so perfect to follow in replacing the antenna mount.
Thank You!! 😊
Awesome instructions for a non-mechanical woman. Thank you!
Interesting and informative video on how to remove an antenna mount and what issues we face sometimes ie. potential corrosion that develops underneath these antenna mounts. I suspect on my car the 2015 CMAX hybrid has it as well under my antenna mount not as bad but enough to degrade my medium and long distant am stations i think an ant. coil is inside for AM if any. FM works well with 16-inch replacement antanna. I have been having a difficult time finding information on how to replace antenna mount for my 2015 Ford CMAX 4 door hatchback 2.0 liter engine. I have a feeling it will be a pain in the rear on mine!
Thanks! Happy New Year!.
Iv done this 😊. Prior to watching the video , but would be nice if you show us how to get to the back of the radio of a Ford Focus 2007 ghia model as nobody has don’t these videos , and the antenna seems to stop working so I’m wondering how to check the back of the radio . And how to test if the inbuilt radio with a 6 dc stacker In built in the dash stoped working . We ghia models have this type of radio CD player and wood finish
I have a 2006 Ford Focus Station Wagon and things are a bit different. The longer ceiling console which has a sunglass holder and garage door opener holder has 5 screws holding it and they all have to come out so the console will come off and give easy access to the torx mounting screw. There is no cut out for your Torx driver access so the console comes out. I did not need to disconnect the power plugs to the light assembly. To get the bit into the torx screw head I had to get the bit into the socket and then keep frontward pressure on the extender shaft of the rachet set. It seems as though you cannot get the torx driver at 90 degrees straight into the socket but you can and once it is in you can loosen the old base by holding the base and the torx driver simulaneously by embracing the front windshield pillar. Reinsall the ceiling console starting with the light end.
+K. R. Gardner We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
very helpful video. my antenna is in good shape but my radio won't play AM any longer. any ideas or thoughts? Thanks.
Did you use the seal from the older antenna base or did the new one come with a seal?
You don't need to tighten it that much when putting the antenna on the mount, hand tight is just fine it's not going to fall off. overtightening it like that you run the risk of breaking the new mount of the internals in the flexible part of the antenna, either would result in a useless antenna.
Could you include a wireing portion ?
+Garnet Grenon We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
What's a "veericle"?
What if u loose the screw that goes into the base
ebay