Har du problem med din Volkswagen / Audi original radio? Mer info om hur du kan laga din radio utan att ersätta hela systemet finner du här www.oem-efterm...
@@benzoabuse still no fix huh? Most likely you need to replace the Hard drive…. However the hard drive (ssd) PATA is like 60$ then you have to track down the original software and firmware. Some guy on eBay says he can fix it for like 120$ im going to send mine in. Let y’all know if he fixes it!
@@benzoabuse I have the same issue. Mines used ($200 off Offerup), I was going to swap it into my 2010 Jetta. I believe it's a software or hardware issue
@@carsonac4163 its a sofware probleem...first you need to know the hardware version...than you will need to burn the firmware on a dvd and let the radio update by dvd
@@tristin7347 idk about that but I did solve this just now by holding both arrow buttons and the star at the same time. Hope it works for you (it's a soft reset)
This is how I fixed this issue on my RNS 510 : 1 - Download of an older version of firmware (2660 for mine) 2 - Burn the ISO file on a CD / DVD 3 - Go to the car 4 - Start the RNS pushing and holding (about five to ten seconds) the three buttons : voice/eject/setup 5 - The RNS show this message : "system unable to start, insert SWL DVD" 6 - Insert the DVD you burned earlier, a message to ask you to confirm the installation. Answer that you want to run it and wait... 7 - Let the install finish the downgrade and reboot the RNS 8 - Tadaaaaa !!! Now it works ! (no more maps or music but no more looping "boot" too ! :) Then you can chose to let it like this (after maps install)... or try to upgrade step by step... You now know how to fix the issue of booting screen... then if it appears again, redo all these steps... and stop at the last upgrade that worked at your first try. ;) This just worked on my RNS 510 (official)... hope it will work with yours !
what was the point in this video?
This issue is there for many in USA . Did you solve the problem?. If so, how?
Did you get an answer???
I have same the same issue
Where did u get ur bench setup?
What problem is that??
Brother, I have the same problem, the radio does not turn on. Can you help me?
Did you fix this? I have same problem
Hey, did you found a fix?
How we fix it ?!
@@benzoabuse u found a fix ?!
@@gilgameshirq6582 nah still trying to find a fix. Reply asap when I find smth new
@@benzoabuse still no fix huh? Most likely you need to replace the Hard drive…. However the hard drive (ssd) PATA is like 60$ then you have to track down the original software and firmware. Some guy on eBay says he can fix it for like 120$ im going to send mine in. Let y’all know if he fixes it!
Hi
How did you solve this problem, same in my car
Hey, did you found a fix?
@@benzoabuse I have the same issue. Mines used ($200 off Offerup), I was going to swap it into my 2010 Jetta. I believe it's a software or hardware issue
@@carsonac4163 its a sofware probleem...first you need to know the hardware version...than you will need to burn the firmware on a dvd and let the radio update by dvd
@@sanka920 how do you go about finding the firmware , a specific website or through Volkswagen ?
@@tristin7347 idk about that but I did solve this just now by holding both arrow buttons and the star at the same time.
Hope it works for you (it's a soft reset)
What's the problem?and what can I do to fix it
This is how I fixed this issue on my RNS 510 :
1 - Download of an older version of firmware (2660 for mine)
2 - Burn the ISO file on a CD / DVD
3 - Go to the car
4 - Start the RNS pushing and holding (about five to ten seconds) the three buttons : voice/eject/setup
5 - The RNS show this message : "system unable to start, insert SWL DVD"
6 - Insert the DVD you burned earlier, a message to ask you to confirm the installation. Answer that you want to run it and wait...
7 - Let the install finish the downgrade and reboot the RNS
8 - Tadaaaaa !!! Now it works ! (no more maps or music but no more looping "boot" too ! :)
Then you can chose to let it like this (after maps install)... or try to upgrade step by step... You now know how to fix the issue of booting screen... then if it appears again, redo all these steps... and stop at the last upgrade that worked at your first try. ;)
This just worked on my RNS 510 (official)... hope it will work with yours !
@@kenhutchinson2655 you saved me. I was so close to give up
@@alpha-tsx how do you fix it?
@@kenhutchinson2655 who can i download swl 2660?
@@kenhutchinson2655 How do I know what software to download and where do I get it?
i have same issue anyone find fix for this
You didn’t have a solution!
Update it
Same problem here...
Any news?
Kurva sokat érő videó. Fasza vagy 😡😡😡