I gave you 5 stars. ✨🌟🌟 You should how to get the job done and your video was not 20 minutes long. Your voice was spoke well and I applaud the video. thank you for your help. Ks Kid
This works on older printers. A newer model I have, uses cartridges that read a computer chip or something that needs to be reset inorder to function. I bought refillable cartridges, but their measurements were slightly too big and messed up the printer. Be sure to cover the holes after. While working in a large corporation when refilling these cartridges began, a few appeared to blow up in the printers because employees did not cover the ports that were filled and did not wait for the sponge inside the cartridges to absorb the ink. I watched this video to refamiliarize myself with the process.
Thanks so much and I hope it works my old 4500 series they used to refill at the Ace hardware, I've printed out a lot of stuff this month costing me around a hundred and 60? Maybe more I use the 65 and opened the color ink from Walmart and it's 63, and I know since I opened the foil that Walmart won't take it back! It looks exactly like the 65 and the little dot's I assume are some code that only the printer recognizes but it didn't except the 63 and the color is so expensive especially the XL I should have looked at the foil before I opened it but I probably tossed the box so it would fit in the drawer and I remember this nice old black man in Walmart who gave me the best advice, before you buy a printer you gotta shop the ink! And ya know he was right it's the cheapest one, unless you can share ❣️ Now I hope I can find the kit I used to use 🤣 it's here cuz I'm on the 3rd floor and it is a pain taking more than the garbage down to the dumpster! 🙏🙏
If you peel the sticker off, it'll display an ink mark on the sponge. Magenta: top (singular) hole...Blue/Cyan: Right hole...Yellow: Left hole. Your question is valid! Why make a tutorial if you're not going to detail each step 🙄
My cartridge needs to be reset. It’s saying low ink still. Idk what to do. I did the method of putting 3 others in Then the refill and it’s not working. Ready to toss this out the window
Will you please be more specific? You said you were refilling the blue ink. The syringe went in the top right hole. The sticker showed blue on the left. Also, as another reader pointed out: There are 4 holes, and 3 colors. Which holes are for what?
Thank you! What kind of ink is the refill and do you know what the approximate cost per cartridge refill is? (how much $ do you save roughly). Where did you buy the syringe and ink?
Hi I was wondering if there are certain holes for color cartridge that each color goes in. Like does the cyan have to go in to top right or can it be any hole?
Oh crap so I can't just suck out the 63 that I accidentally bought and fill my 65 that is empty? I swear the box said 65 but inside the foil was a 63 don't they have quality control?
@@mrprints1660 I think my cartridge is still okay since it print perfectly for now I make a guess that my filter is still good, so next time I will refill it with 150° syringes injection.
Hello good day... Please is it a must i use refilling kit to suck out a little bit of ink from the cartridge after filling the cartridge with ink or just as u did, after filling the cartridge i should leave it for 10 minutes and after 10 minutes i insert the cartridges back in the printer and start printing?
My ink cartridge was empty, yet every time I filled with only 2 ml of ink, the holes would overflow ink. Then the print head would drip ink. It seemed that all ink I put in would just drip out of print head. Why is this? Is the sponge not absorbing properly or damaged?
There is a limit on the number of times ink can be added to the cartridge.The sponge in the cartridge is no longer absorbing water.I can send you a new set of cartridges. How can I reach you?
@@mrprints1660 so is it possible to put the 63 in the 65 if I clean it? I swear the code looks exactly the same but it was flashing right away so I took it out and put the old back in! There has to be such small changes not visible to the naked eye
I gave you 5 stars. ✨🌟🌟 You should how to get the job done and your video was not 20 minutes long. Your voice was spoke well and I applaud the video. thank you for your help. Ks Kid
This works on older printers. A newer model I have, uses cartridges that read a computer chip or something that needs to be reset inorder to function. I bought refillable cartridges, but their measurements were slightly too big and messed up the printer. Be sure to cover the holes after. While working in a large corporation when refilling these cartridges began, a few appeared to blow up in the printers because employees did not cover the ports that were filled and did not wait for the sponge inside the cartridges to absorb the ink. I watched this video to refamiliarize myself with the process.
Thanks so much and I hope it works my old 4500 series they used to refill at the Ace hardware, I've printed out a lot of stuff this month costing me around a hundred and 60? Maybe more I use the 65 and opened the color ink from Walmart and it's 63, and I know since I opened the foil that Walmart won't take it back! It looks exactly like the 65 and the little dot's I assume are some code that only the printer recognizes but it didn't except the 63 and the color is so expensive especially the XL I should have looked at the foil before I opened it but I probably tossed the box so it would fit in the drawer and I remember this nice old black man in Walmart who gave me the best advice, before you buy a printer you gotta shop the ink! And ya know he was right it's the cheapest one, unless you can share ❣️ Now I hope I can find the kit I used to use 🤣 it's here cuz I'm on the 3rd floor and it is a pain taking more than the garbage down to the dumpster! 🙏🙏
It would be VERY HELPFUL if UA-cam didn't remove the dislike counter. That way we can ALL know if this ACTUALLY works or not.
😎
You can get a chrome plugin to show dislikes on UA-cam
I wish you had filled the magenta & the yellow as well, because there are 4 holes & only 3 colors, I needed to know which holes to fill.
what a joke!
@@mrprints1660 wdym I have the same question 😢
He'd put himself out of work if he showed everything. That's not good business
If you peel the sticker off, it'll display an ink mark on the sponge. Magenta: top (singular) hole...Blue/Cyan: Right hole...Yellow: Left hole.
Your question is valid! Why make a tutorial if you're not going to detail each step 🙄
@@marshallmagsam Why make a tutorial, then, Mr. Prints?
My cartridge needs to be reset. It’s saying low ink still. Idk what to do. I did the method of putting 3 others in Then the refill and it’s not working. Ready to toss this out the window
Do you clean the syringes after use?
quick question. Hp says the Black cartridge contain Black pigment ink instead of dye. should I refill them using pigment ink?
Hi 64 xl how many ml it can take
And the colors too please let me know please thank you
OK on black and blue inks. Where does red and yellow go? How typical...
On the 63xl even ones that do not say HP look to be the same size.. do they also take 10 units of black ink?
Hi, thanks for the great video. But may I ask how to reset the ink cartridges to tell the printer the ink level is reset?
Does it still print?
@@maykaspringer6868 yes, it is. but the cartridge shows very low ink. I am wondering whether it will continue to print after a while. Thanks
Id like to know if it’s possible to reset that warning as well
@@me53485 I will let you know as soon as I find a solution
Yes,After refill Press and hold the stop button for 5-15 seconds, and it can be removed after ink cartridge starts to move.and then it's work.
Will you please be more specific? You said you were refilling the blue ink. The syringe went in the top right hole. The sticker showed blue on the left.
Also, as another reader pointed out: There are 4 holes, and 3 colors. Which holes are for what?
i used 63. can i use 61 ink cartridge too?
Awesome!thanks for the tutorial
Clean the chip position with alcohol or an eraser, and then test again.
What kind of ink should i use
I cant find 305 bottle
Search:hp 305 ink on amazon
I dont know how you figure what color goes where with the colored ink? or is there color visible under the sticker?
There are 4 holes in the color cartridge, what color do i put in what hole.
Awesomee!! Can I somehow use sublimation ink instead to make it a sublimation printer for printing t shirts and such with my cricut machine
No, sublimation inks can only be used on specialized printers
@@mrprints1660 okay that was funny! I was just thinking about the huge mess that would be all over the place
Hi can i use other ink for my hp 4635?
How about a close up of the insertion part
With the coloured one, which hole corresponds to which colour (top right is blue but what about the others?)...
when you peel off the sticker you can see the color in the holes. It is a little tiny dot of each color
You could use toothpick and poke it in there to see the colour
so how do you know what colors are to injected to each whole are the holes labeled red blue green?
On the plastic there's a dot of the color that goes in the hole. Red dot, blue, yellow dot.
hey i have a hp 63 catridge it is pigment based one can i use dye ink instead of pigment for the black one
Don't mix.The print head will be easily blocked.
You sound like Alan Watts 🤩
How do you know wich color goes where?
What brand of ink refill do you use? I have hp 7855 evnvy photo printer takes 64 ink
You can buy on Amz.
YOOO UR SO UNDERRATED
Why do you say
@@mrprints1660 bcz the video quality is very good and the subs are too low so that's why I said ur so underrated dude u should've had like 100k+ subs
i have hp 64 non xl.... how much black ink do you put in the black cartridge and how much ink in the tri color chambers?
I thought he said like 10 something on the syringe.
Black 10 Color each 3
Where do I buy ink and siringe in US?
US and still don't know for Amazon ?
where did you buy the syringes for the ink?
From a pharmacy
amzn.to/3y5H74R
How would u set the lowbink? Or can you keep printing like that?
Press and hold the stop button for 5-15 seconds, and it can be removed after ink cartridge starts to move
Press and hold the stop button for 5-15 seconds, and it can be removed after ink cartridge starts to move
You don't seem to be using a clip. Will it work without one? And it won't drip?
just add it according to the steps and cover the original label.
Thank you! What kind of ink is the refill and do you know what the approximate cost per cartridge refill is? (how much $ do you save roughly). Where did you buy the syringe and ink?
What is your printer model?
HP
HP - ENVY 6055 Wireless All-In-One Instant Ink-Ready Inkjet Printer - White
Model:5SE16A#B1F SKU:6404827
ok.That’s envy 6055 suit for hp 67. Contact my Facebook 617433693@qq.com.l send you link.
.
What color is each hole?
You can insert a toothpick and pull it out to see what color it is.
What can i use if the sticker wont stick anymore?
adhesive tape
How many prints does one refill give
Same question
How much ml?
Black 10ML Color 5ML
what ink brand do you use?
amzn.to/3y5H74R
I have the same printer and my screen went blank do you know how to fix that?
Click print, see the computer prompts printing error, and then Google search printer to add error
@@mrprints1660 Thank you so much I will try this
Aaaaaaand...... How about if you still have low or 0% ink warning?
Hi I was wondering if there are certain holes for color cartridge that each color goes in. Like does the cyan have to go in to top right or can it be any hole?
Yess theres a way to pop off the top so you know inwant to say its blue top red left and yellow right but don't quote me
.
Oh crap so I can't just suck out the 63 that I accidentally bought and fill my 65 that is empty? I swear the box said 65 but inside the foil was a 63 don't they have quality control?
Do you need to wash and clean the syringe each time? If so by water?
After refill you can use an alcohol wipe to clean the ink outlet of the ink cartridge.
Where do I get the refill kit for HP 3830 uses 63 ink cartridges. I live in the USA. Thanks
follow my Facebook Ura Kim
Amazon
@@garyr7027 CG 245 ink cartridges
You didn't show where the other colors go.
Oh no I refill it straight up not and angel injection, what happen if you inject straight up ?
It is recommended to use a syringe, add it diagonally according to the video tutorial, otherwise the printerhead will be broken
@@mrprints1660 I think my cartridge is still okay since it print perfectly for now I make a guess that my filter is still good, so next time I will refill it with 150° syringes injection.
@@aintmucho5257 After refill if you have the tool that you can pump out the air from the printhead.It will be better.
@@mrprints1660 yess I do have suction tools
How many time fill it?
one time bk 10mk and cl 3ml/each
Ok Black is black job done. on the colour cartridge why is there 4 holes and we would only use 3 colours ? As Toyah said its a mystery
Where do I get refill kit for 61 hp cartridge (from india)
Can I buy from Amazon
@@safvanasaifu1179 yes.we just sell on us amz
Hello 👋, I’m new to printing/printer usage. Where can you buy this re-fillable ink? Thank you 🙏 I’d appreciate your help
amzn.to/3y5H74R
Hello good day...
Please is it a must i use refilling kit to suck out a little bit of ink from the cartridge after filling the cartridge with ink or just as u did, after filling the cartridge i should leave it for 10 minutes and after 10 minutes i insert the cartridges back in the printer and start printing?
Yes ,any issues just text me on my FB:Ura Kim. Have a good day
Sir iam filling black cartridge not filling colour catridge what happened ? Print does Not work
HI,If you print error occurred, please check the printer display code first.
Ink comes off very easily from hands using natural soap, marseilla soap.
So smart
My ink cartridge was empty, yet every time I filled with only 2 ml of ink, the holes would overflow ink. Then the print head would drip ink. It seemed that all ink I put in would just drip out of print head. Why is this? Is the sponge not absorbing properly or damaged?
There is a limit on the number of times ink can be added to the cartridge.The sponge in the cartridge is no longer absorbing water.I can send you a new set of cartridges. How can I reach you?
my officejet still shows ink incompatible how to solve it 🙏
Clean the chip position with alcohol or an eraser, and then test again.
@@mrprints1660 so is it possible to put the 63 in the 65 if I clean it? I swear the code looks exactly the same but it was flashing right away so I took it out and put the old back in! There has to be such small changes not visible to the naked eye
Can anyone tell me how to reset the ink level so that my printer thinks theres ink on my HP 2652 printer?
There is no way to reset, the printer will show a lack of ink, but it does not affect
@@mrprints1660 But it just wont print... even though ive added 4ml of ink to the cartridge... it still shows empty and wont print. any ideas?
You said 10ml but the video shows 4 ml.
black 10ml color each 4ml
I think you need larger gloves...!
LOL.