This video saved me $450 a month in parking fees! I was able to finally move my truck to the new company im witj and park for free! I have a 2014 Mack CXU613 and this hack worked like a charm! Nkw i can use those funds to get a new sensor! Wish i found tbis video much sooner! Anyway thanks for posting! Appreciate the info!
Only works on older trucks, freightliner reprogrammed and now you can't do that any more. The truck is derated by rpm now. Not by speed sensor, at least on the 2016 Freightliner, might try pulling the fuse for the ABS sensor, might work on the newer trucks.
@@josephwinfrey5732 don’t unplug the sensor u have keep the sensor connect but take it out the hold the sensor it work my guy to make it easier on u just buy a new sensor unplug the old one put the new one in the plug and zipper tied it down it get U home or to a shop
It didn't work for a 2017 cascadia. All it did was give me a transmission warning and get my clothes and myself dirty. All the lights stayed on. Maybe for an older truck?
It works on my 2015 freight liner cascadia. However, since it disconnects speed it throws the ELD off. For me, it continued to log off duty even while I was moving!
@@Darubini01TV yeah bro tell me about it. That’s towing alone. Everytime I had it towed to a shop they kept saying def sensors were bad. I’ve since solved the issues. Best way to fix the problem!!!!sell the trucks😂
So your Def level was reading empty and u disconnected the speed sensor and then your def level went to full? And your yellow/orange check engine lights r still on and u can still drive?
0 seconds ago Hafid brother I have same issue sue with def truck going 5 mile per I disconnect speed sensor but yet still I don’t have any change with speed
Tengo un Isuzu nqr y me reduce la velocidad después de 20 millas y más cuando hace calor y me tengo que parar un rato para poder volver a avanzar otro pedazo me podría. Ayudar con eso! Gracias!
hello bhaji, i tried this method and remove clutch switch on my cascadia 10 speed manual but not works, adviced this trick not work for freightliner detroit motor,
My truck derated and wont go over 5mph (only goes to 3rd and 4th gear). Hear a slight hiss and draw back every time It tries to change out of 4th gear. My stop light came on. Loves roadside came and hooked up PC and said its def pump. Went and bought a used entire def unit. Only switched the pump but still has same problem. I hooked up my scan tool and noticed it saves def tank has 75 percent but then it goes away at times and then reads at times (all while scan tool is connected). Def status, exhaust temp and all reads NA. Could it be that unit that sits in the tank? Is that where the sensor is? If so do you think ifs best to replace that part since I have the entire used unit?
Also what spn code did you get at the time? It takes us truckers banding together to share our experiences and facts about things to defeat the corrupt dealerships and manufactures. They hide and keep everything secret only to rip us off and beat us over the head and all we want to do is drive to make a living for our families. Thanks.
SPN4374/FMI 0 = DEF PUMP SPEED & DEF PRESSURE 👌 engine reaction will be 25% Derate. This code is set whe. DEF pump speed is higher than Normal for given Def Pressure. need to replace DEF pump if you have this code. If you buy from junk yard it might cost from 400$ to 1000$ Always call multiple people and dealers.
@@desitruckersinu.s.a2797 Loves “road side assistance” lol said def pump. I didn’t have that code. Fool told me my problem is def pump not working. Turns out It was the def doser valve had burned at the connection. I went to junk yard and just replaced the pump also because I didnt know it was the doser until a few days later. Sad thing is that warning and derate will not go away until code is clear. The manufactures should be in place a default reset once the problem is fixed. Its unfair to consumers that you need to take it in somewhere or buy in expensive reset tool to do so. You could be stuck out in the Arizona desert or in the mountains with no phone service smh
If your doser valve/pump is bad try to disconnect the sensor switch from the doser valve. It bypass the reset requirements it worked on my truck hopefully help someone else.
Didn’t work, I’m having the exact issue as you but when I unplug the sensor I still can’t go over 5, on top of that I have another code for radar and the truck is running even worse than before. Thanks anyways
If it's an automatic transmission the transmission will not shift. depending on the transmission it could only have 3rd gear which would make it hard to start off.
This video saved me $450 a month in parking fees! I was able to finally move my truck to the new company im witj and park for free! I have a 2014 Mack CXU613 and this hack worked like a charm! Nkw i can use those funds to get a new sensor! Wish i found tbis video much sooner! Anyway thanks for posting! Appreciate the info!
This information literally got me to the shop that I was two hours away from. Thank you for this video!!!
You are so welcome!
Thank you so much brother! It worked on my 2015 International.
Glad to hear that
Thank you sir that happen to me tow truck cost me $800 from long beach to Fontana and they still don't know what's the problem thank u
this trick works my friend atleast saves road service۔ glad it helped you۔
Perfect for the plandemic of def and diesel shortages
Only works on older trucks, freightliner reprogrammed and now you can't do that any more. The truck is derated by rpm now. Not by speed sensor, at least on the 2016 Freightliner, might try pulling the fuse for the ABS sensor, might work on the newer trucks.
Yeah I tried pulling the sensor on my 2015 and it didn't work. Where is the ABS sensor?
@@josephwinfrey5732 don’t unplug the sensor u have keep the sensor connect but take it out the hold the sensor it work my guy to make it easier on u just buy a new sensor unplug the old one put the new one in the plug and zipper tied it down it get U home or to a shop
Well that explains my problem
@@trustinthelord2248 So, does this mean that he had a bad sensor?
@@LiveLifeLivTrucking no
Hafid brother I have same issue sue with def truck going 5 mile per I disconnect speed sensor but yet still I don’t have any change with speed
It didn't work for a 2017 cascadia. All it did was give me a transmission warning and get my clothes and myself dirty.
All the lights stayed on.
Maybe for an older truck?
Question do you leave it disconnected or do you connect it back?
Excellent tip!
Glad it was helpful!
It works on my 2015 freight liner cascadia. However, since it disconnects speed it throws the ELD off. For me, it continued to log off duty even while I was moving!
IM glad it worked for you and ELD isnt catching driving isnt that good ? 😄
Come on, man
Us paper for emergencies
Hmmm. Gonna keep this in mind. I (no joke) have over 20k in towing bills just this year alone from the stupid DEF system😡
Me same bro
Damn,that's a lot of cash 😡
@@Darubini01TV yeah bro tell me about it. That’s towing alone. Everytime I had it towed to a shop they kept saying def sensors were bad. I’ve since solved the issues. Best way to fix the problem!!!!sell the trucks😂
How far could drive like that
@@arringtonboysracing once turtle light comes on the trucks I owned usually go about 5 miles then it bogs down to 5mph
Thanks buddy keep making more vedios
So your Def level was reading empty and u disconnected the speed sensor and then your def level went to full? And your yellow/orange check engine lights r still on and u can still drive?
LIFESAVER !!! Thank you!
Which abs fuse do you remove? There is like 3 of them: ABS BATT1, ABS BATT2 and ABS IGN....Freightliner Cascadia 2016
Warning, you’ll have no engine brakes, you’ll have very little boost power. Be careful on hills.
Thanks for some additional information:)
Thank you i have a 2011 GMC is only drives at 55
I’ll try this today.
Does this work for 2023 Pete 579? Thxs
Great info
Good to know,thanks bro
Always welcome
Thank you
0 seconds ago
Hafid brother I have same issue sue with def truck going 5 mile per I disconnect speed sensor but yet still I don’t have any change with speed
Awesome!!
good video man
Does this work with the hino trucks.
Tengo un Isuzu nqr y me reduce la velocidad después de 20 millas y más cuando hace calor y me tengo que parar un rato para poder volver a avanzar otro pedazo me podría. Ayudar con eso! Gracias!
hello bhaji, i tried this method and remove clutch switch on my cascadia 10 speed manual but not works, adviced this trick not work for freightliner detroit motor,
Yeah right
I was told that would not work on an automatic is that true ?
Anyone know how many miles we can drive like this? I want to get back home and I'm looking at 1200 miles
Does this work for Pete 579 2018 2019?
I tried did not work. My 2011 Freightliner Allison 6 speed transmission won't shift out of first gear after disconnecting the space sensor .
How far you think I can drive after unplug it??
What is the model of the truck nd does it work on freightlinets
Freightliner cascadia 2016
Does this work on automatic???
Is def doser going bad
It doesn’t works on 2020 model cascadia works on volvo but
WARNING ⚠️ ⚠️ ⚠️ ⚠️ When you do this step turn ur EXHAUST BRAKE OFF!!! (ENGINE BRAKE) Or you will damage ur automatic transmission!!!
My truck derated and wont go over 5mph (only goes to 3rd and 4th gear). Hear a slight hiss and draw back every time It tries to change out of 4th gear. My stop light came on. Loves roadside came and hooked up PC and said its def pump. Went and bought a used entire def unit. Only switched the pump but still has same problem. I hooked up my scan tool and noticed it saves def tank has 75 percent but then it goes away at times and then reads at times (all while scan tool is connected). Def status, exhaust temp and all reads NA. Could it be that unit that sits in the tank? Is that where the sensor is? If so do you think ifs best to replace that part since I have the entire used unit?
Also what spn code did you get at the time? It takes us truckers banding together to share our experiences and facts about things to defeat the corrupt dealerships and manufactures. They hide and keep everything secret only to rip us off and beat us over the head and all we want to do is drive to make a living for our families. Thanks.
SPN4374/FMI 0 = DEF PUMP SPEED & DEF PRESSURE 👌 engine reaction will be 25% Derate. This code is set whe. DEF pump speed is higher than Normal for given Def Pressure.
need to replace DEF pump if you have this code.
If you buy from junk yard it might cost from 400$ to 1000$ Always call multiple people and dealers.
@@desitruckersinu.s.a2797 Loves “road side assistance” lol said def pump. I didn’t have that code. Fool told me my problem is def pump not working. Turns out It was the def doser valve had burned at the connection. I went to junk yard and just replaced the pump also because I didnt know it was the doser until a few days later. Sad thing is that warning and derate will not go away until code is clear. The manufactures should be in place a default reset once the problem is fixed. Its unfair to consumers that you need to take it in somewhere or buy in expensive reset tool to do so. You could be stuck out in the Arizona desert or in the mountains with no phone service smh
If your doser valve/pump is bad try to disconnect the sensor switch from the doser valve. It bypass the reset requirements it worked on my truck hopefully help someone else.
Didn’t work, I’m having the exact issue as you but when I unplug the sensor I still can’t go over 5, on top of that I have another code for radar and the truck is running even worse than before. Thanks anyways
I wanna know how to trick the truck into thinkin' it needs a regen. This way the truck will idle until you actually do a forced reg.
I just tripped this but my acceleration was power much nonexistent
This does not work on a Isuzu NPR. Just for reference
It’s not working in my cascadia 2019 😢
How did you resolve it
@@krisgonzalez5625 tow truck 😭
Didn’t work. Mine won’t rev up.
*DEF?*
If it's an automatic transmission the transmission will not shift. depending on the transmission it could only have 3rd gear which would make it hard to start off.
It drives in manual mode, trans doesn’t know when to shift because no speed sensor. That’s how it is in a Volvo, at least
I did this but it didn't work
auto truck wont work like that
It doesn’t work hino!
U need an alignment 😂😂😂buy an OTR performance diagnostic tool
Trust me! OTR device failed to regen so I had to use this trick. After I got to truckstop I was able to regen with OTR device.
That did not work on my 2016 with a Detroit
it works on my 2016. some trucks dont accept this trick not sure why but there is nothing wrong in trying when we stuck.
@@desitruckersinu.s.a2797 having this trouble now . I got 2016 should I pull the abs once I find out... Cummins
With my 2017 international, this trick DIDN'T WORK 👎👎
Hafid brother I have same issue sue with def truck going 5 mile per I disconnect speed sensor but yet still I don’t have any change with speed
Doesn't work for 2021 Western Star
it does not work for 2012 Hino 268.
Hafid brother I have same issue sue with def truck going 5 mile per I disconnect speed sensor but yet still I don’t have any change with speed