You guys are so lucky to be able to get such an engine for just 150 Pounds. In Turkey, things are a little bit crazy. The second hand value of a 2008 Micra is about 100k TL. You heard it right, 100k. This is less than 10k pounds. The min wage is 300 pounds a month. I know, this is our problem but just wanted to say how lucky you are. Good job.
Hi there Wow so 100k TL is about £8700 over here, that would get a lot of car. It does mean unfortunately that people here want the latest and greatest and don't tend to fix their cars. Im happy driving an old Peugeot every day and work on it myself when needed. These old micras now are almost considered disposable and a lot would have probably scrapped this one but it seemed such a waste.
@@peugeotCitroen2CV My wife has the same car, we drive it on daily basis. I like it because it is very fun to fit into a parking spot where big cars just drive off. :D
@@geodreieck2 Watching this video as I was in the search for a tutorial about engine disassembly, and I think I'm going to get it rebuilt. They quoted me about 10 times the price of a new engine mentioned in the video, and I don't think that it is well earned. Yes, very complicated, but nothing that would cost 1500GBP.
No it wasn't too bad, the usual wee bit of scab behind the drivers headlight but it has not got serious yet. The rest of the car was fairly sound to make it worth putting the engine into. It is unfortunate that these and the yaris rust for there generally isn't many common problems. The blown head gasket surprised a few mechanics i had discussed this with but i suppose no matter how good the engine poor maintenance will still wreak havoc.
Great video by the way . I've broken those two back bolts hidden behind the engine mound they were coroded as they never really felt like breaking loose . An oldish car as a daily runarund ( 2006 Nissan note 1,4) on the engine mount when doing a rocker cover re-gasket and valve seal issue any idea what lenght they are I know they're M8 did not want to waste money probably between 20 and 30 mm I'd guess .
Hi, i have since sold this car not too sure what length they were. I have a box of nuts and bolts from stripping a few cars down to the bare metal very handy for times like that. However a few M8 bolts will not cost a great deal either.
I have a k12 which will be going to scrap due to excessive corrosion on the chassis, im wanting to remove the engine and strip it down as a project and to see why it was knocking. Do you know if removing the engine is possible without a ramp by removing the front bumper and crash structure?
Hi, yes there are many other ways to remove the engine without having a 2 post lift. If you get an engine crane (possibly even rent one, some hire stores do that) remove the bonnet and lift the engine and gearbox up and out of the car. The front bumper and slam panel shouldnt need to come out, i think but removing them will give better access to the manifold bolts. There are probably a handful of other approaches to take to getting the engine out A forklift for example could lift the car. Hope that helps and enjoy dissecting the engine.
Hi there its not something i have changed, like a lot of petrols of this era they dont have a stand alone fuel filter, typiically just a gauze as part of the fuel pump. This might help: club.autodoc.co.uk/manuals/how-to-change-fuel-filter-on-nissan-micra-k12-replacement-guide-32435
Hi there, i see in the video it is shown at 23:00. i think from memory this is on the side of the gearbox. In the shot you can see the gearbox "sump" and where the driveshaft goes in.
@@peugeotCitroen2CV Thank you so much... i saw it in video but i didnt know exaktly where is it... i took Foto from this shot but i search in car and i didnt found it... and in Internet i cant find anything about it... and i have a automatik Transmission.
@@ghandiali8931 Hi, not too sure exactly where the switch is on the automatic version as i have never had one in. However the best spot to ask would be one of the K12 micra owners clubs, facebook has a few
It was considered but the replacement engine was £150, trying to sort out the original could potentially have cost much more and there was a risk of other expenses along the way so it seemed safer to just replace it.
You guys are so lucky to be able to get such an engine for just 150 Pounds. In Turkey, things are a little bit crazy. The second hand value of a 2008 Micra is about 100k TL. You heard it right, 100k. This is less than 10k pounds. The min wage is 300 pounds a month. I know, this is our problem but just wanted to say how lucky you are. Good job.
Hi there
Wow so 100k TL is about £8700 over here, that would get a lot of car.
It does mean unfortunately that people here want the latest and greatest and don't tend to fix their cars. Im happy driving an old Peugeot every day and work on it myself when needed. These old micras now are almost considered disposable and a lot would have probably scrapped this one but it seemed such a waste.
@@peugeotCitroen2CV My wife has the same car, we drive it on daily basis. I like it because it is very fun to fit into a parking spot where big cars just drive off. :D
@@geodreieck2 Watching this video as I was in the search for a tutorial about engine disassembly, and I think I'm going to get it rebuilt. They quoted me about 10 times the price of a new engine mentioned in the video, and I don't think that it is well earned. Yes, very complicated, but nothing that would cost 1500GBP.
I'm surprised - the corrosion isn't as bad on that car as I was expecting.
Looking good so far. Never seen an engine pulled out of one of these.
No it wasn't too bad, the usual wee bit of scab behind the drivers headlight but it has not got serious yet. The rest of the car was fairly sound to make it worth putting the engine into. It is unfortunate that these and the yaris rust for there generally isn't many common problems. The blown head gasket surprised a few mechanics i had discussed this with but i suppose no matter how good the engine poor maintenance will still wreak havoc.
You can see the experience here, thank you for the video and best regards! 👍
Thanks for the comment.
I enjoyed your video bro...thankx...very infomative.
Thanks for the comment glad it helped
In other news, said Alfa Romeo 147 made it home is still proving endlessly reliable covering 60 miles per day. Sterling service from a £400 car.
great video. thank you
thanks for the comment
Great video by the way . I've broken those two back bolts hidden behind the engine mound they were coroded as they never really felt like breaking loose . An oldish car as a daily runarund ( 2006 Nissan note 1,4) on the engine mount when doing a rocker cover re-gasket and valve seal issue any idea what lenght they are I know they're M8 did not want to waste money probably between 20 and 30 mm I'd guess .
Hi, i have since sold this car not too sure what length they were. I have a box of nuts and bolts from stripping a few cars down to the bare metal very handy for times like that. However a few M8 bolts will not cost a great deal either.
I have a k12 which will be going to scrap due to excessive corrosion on the chassis, im wanting to remove the engine and strip it down as a project and to see why it was knocking. Do you know if removing the engine is possible without a ramp by removing the front bumper and crash structure?
Hi, yes there are many other ways to remove the engine without having a 2 post lift.
If you get an engine crane (possibly even rent one, some hire stores do that) remove the bonnet and lift the engine and gearbox up and out of the car. The front bumper and slam panel shouldnt need to come out, i think but removing them will give better access to the manifold bolts. There are probably a handful of other approaches to take to getting the engine out A forklift for example could lift the car.
Hope that helps and enjoy dissecting the engine.
Where's the fuel filter located please for micra 1.0 k12 ?
Hi there its not something i have changed, like a lot of petrols of this era they dont have a stand alone fuel filter, typiically just a gauze as part of the fuel pump. This might help:
club.autodoc.co.uk/manuals/how-to-change-fuel-filter-on-nissan-micra-k12-replacement-guide-32435
Hallo... thank you for this vedio.... cann you pleas pleas pleas... tell me where ist the nissan micra k12 reverse light switch location??
Hi there, i see in the video it is shown at 23:00. i think from memory this is on the side of the gearbox. In the shot you can see the gearbox "sump" and where the driveshaft goes in.
@@peugeotCitroen2CV Thank you so much... i saw it in video but i didnt know exaktly where is it... i took Foto from this shot but i search in car and i didnt found it... and in Internet i cant find anything about it... and i have a automatik Transmission.
@@ghandiali8931 Hi, not too sure exactly where the switch is on the automatic version as i have never had one in. However the best spot to ask would be one of the K12 micra owners clubs, facebook has a few
He'll will this be similar to swapping an engine on a k11 ?
Possibly, i have never done an engine change on a K11 but the same basic process should be similar.
Good day sir. Do you know where i can buy EPS assembly for my nissan march k12?
What is an eps assembly?
@@peugeotCitroen2CV the Electronic Power Steering assembly sir
Tbf doing the head gasket wouldve been easier haha
It was considered but the replacement engine was £150, trying to sort out the original could potentially have cost much more and there was a risk of other expenses along the way so it seemed safer to just replace it.