VICKY IS THE COOLEST PERSON! She's an amazing wife, mother, and is a good friend to others. A perfect lady that brightens up the room with her warm smile 😁. She always helps out and chips in to help as best as she can for the people she loves. YOU ROCK VICKY! Keep up the good work on taking care of your amazing racing family. Another great video 📸. Have a good day today 😎🌞. Thanks.
The compressor switch is high pressure. The dryer switch is low pressure. They both should be present. They are wired in series. Too high or too low, the correct switch opens and disconnects the 12v dc from the compressor. Do NOT install it on the dryer.
Everytime I watch your videos it reminds me of days gone by granted we didn't run cars of your caliber but it still takes me back to that place and time.
Can’t wait to see the 55 back at your place! I just picked up a nearly rust free 55 4 door 210 and plan on doing a 2 door conversion and a nice small block swap. It has 72k original miles and the 6 still runs like a sewing machine.
THANKS FOR SHARING AN AMAZING LOVING FAMILY MOMENT, THE MODEL FAMILY UNIT THAT OTHERS CAN ADMIRE DURING THE HOLIDAYS. Great video that's very appreciated! Keep up the good work 👍. Have a good day today. Loved the video! Thanks.
I'm glad you all had a awesome Christmas, Wyatt never fails to put a smile on my face, he's such a happy boy with awesome parents and grandparents. I'm impressed with your 427 sb Bill for it to go that long after the oil pressure issue, that's a true testimony to uncle Bob's work. Hope everyone has a safe and happy new year. I'm looking forward to the sick week video. God bless and as always be safe.
More stroke, goes good with NX. When a roller doesnt roll,it's wiped. Their is a way of cutting the locks off the rod bearings. Somehow pen the bearings. It keeps the bearing from spinning. I've seen literature in a GM machinest guide. It had the 3.8 Buick. All the stainless crank motors. Geometry of cutting rotating mass. I'm sure,Bob has got em all, Ford Bible. I'd like to see, secrets, and process, of a build,in depth. Well I thought it would be good content. Thanks for the ride.
Everytime I Built a 400 SBC and used Non 400 Heads with Steam Holes I always Drilled the new heads to eliminate dead areas between Syamese Cylinders on a 400
You guys had me laughing fussing about the fuel gauge. You are a very fortunate man to have her for your wife.I really look forward to your videos Bill, you have a knack for this stuff.
Bill thanks for another great video. I look forward to seeing all of your videos and adventures in life. Thanks again for sharing the best family and friends anyone could ask for. Merry Christmas and Happy New Year
Bill I think you're gonna like the soild roller. I've put 3000 + miles on a old old .600 roller in my Nova.. it's old comp stuff with a rev kit. Took valve covers off once to check everything and no problems at all. Didn't even have to reset lash
This is why I love my dart shp block. Primary main oiling so you hear valve train noise first anytime there is oil level issue. I can't count how many times this has saved me, kinda embarrassing to admit but it is what it is race car motor and ring gap makes a fun driver but needy when it comes to fuel and oil.
Bill, that sucks about the 421. I was always lery of something like that on my 421, which is why i installed an oil pressure switch and a bright-azz Autometer light...just for oil pressure (or actually a LACK of pressure). If that light EVER came on then I could instantly kill ignition and coast to a stop, wherever I might find myself.
Happy New Year!!! Can't wait to see what bring on 2025 for y'all! It's getting bigger and bigger than ever for anything y'all put mind into! Have a great journey!
Just what I needed for this Monday morning another video from da ol man thanks Bill for everything you do I love all of your families channels Happy New Year ❤
Up with heartburn! This video couldn't have come at a more perfect time! Thank you! 😊 Tommy's motor is looking sharp in the Malibu! Can't wait til all the electrical and nitrous issues are fixed so we can see what it runs! So glad the nitrous didn’t spray in Florida so you can still use that motor! 😬
@@bustedknuckles6051Interesting have to look this water fasting up,I suffer from heartburn and don't like taking meds. Their just a temporary fix and my gut doesn't like meds either. Take care of 1 thing 4 another issue to show itself.
@@KTL72-ul7ej just water and black coffee, no food. I did make some homemade electrolytes with a recipe online called snake juice to keep from getting cramps or anything.
@@kaedyncopper12 exactly. Don't over complicate it, the only thing I would recommend is doing keto for a week or two leading up to it or it really sucks. Last year I did it and didn't eat keto leading up to it and dealt with nausea and feeling absolutely terrible the whole time. Ended up quitting on the 6th day because I was dry heaving, but the year I did it following keto It wasn't even that bad, just a mental game.
There's always something, isn't there Bill !! Little things that bite you and take time, but it looks like you've got it under control. And another family adventure is sooo cool ! And as I've said before--Wyatt has no idea how great his life is, and will continue to be, with a family like yours ! Hey, I was watching House Of Pearls last video on dad's '55 and it's looking unbelieveable !! That paint is like liquid glass---so deep !! HAPPY NEW YEAR everyone.
What a great surprise Sunday night video saw Dad‘s 55 house of pearls video. Outstanding Can’t wait for sick week. Wish you guys luck. Enjoy the experience. Merry Christmas and happy new year.
Hell, yeah man keep the videos coming merry Christmas to you and your family and a happy new year to y’all. Hope y’all have a good and keep the videos coming. Can’t wait to be on y’all level one day my channel.
Mannnn part way through now. I hope that kid had a good Christmas and mom and dad came to their senses and just buzzed the rest off. It’ll grow back, shit happens!
Ive had to massage those cast BB valve covers before. Had to cut back corners off on a diagonal and weld flat plates in to clear firewall. After repolishing them they looked fine.
Haven't. Read. The. Comments. But. I. Use. To. Drill. 1/8. Hole in. Hinges. Door. Or. Hoods. When. U. Take. It. Off. Then. When. U. Install. 1/8. Drill. Each. Hole. Tighten. No. Adjusting. Take. Thick. Touch. Up. Paint. In. Hole. It. Works. For. Me. I. Hate. Adjusting. But. Unless. It. Needs. It. To. Begin. With. Great. Video. Thanks. To. All. Family. And. Bob. An. Mark. Everybody.
Shifting at 7000 into 3rd at Bradenton noticed that oil pressure was 0😮. Took the 468 Chevelle engine apart. I got lucky it was fine. Just a broken oil pump shaft.
I see you still have the bypass in the filter adaptor on the 421. Block that bypass, a lot more oil than you think goes through that bypass. Just tap it for a 1/4” pipe plug, and install a hex pipe plug from the inside of the adaptor. Don’t use a wix racing filter. They don’t filter as small a micron partical. Use one of these filters. Mobil 1 M1-302 Wix 51061 Purolator PBL34631 Fram Ultra Synthetic XG5 Ac delco PF1218A AC Delco PF35L Baldwin B6-HPG Donaldson P166564 Fleetguard LF3488 K&N HP-3003
That Pontiac 421 super duty dual four barrel is a beautiful engine and when paired with a big bore intake and a big single carburetor especially with a couple plates that's a nasty engine I like it a lot.🤟😎🇨🇦
Happy New Year to you, viki and family. Can't wait to see the sick week event, always fun to watch. Some day I'd like to go and participate. Even if just to follow along.
Damn.. give the poor kid a buzz cut that's diabolical😂
Seriously…no haircut should “go wrong” and end with that abomination as the best possible outcome…😂😂😂 poor kiddo lol
Hahahaha I thought. “ shit is that kid amish?” 😅
That Opie cut was as bad as that flat spotted Roller camshaft 😂🤣😂🤣
Hahahah Christmas Eve haircut on the nephew was hilarious
Must be adopted
That and the " Let it snow"
" look you know we're old we can read it " had me rolling too 😂😂
Cookie the 🤡 clown.
Reminds me of myself
When I thought I would give myself a haircut oops
Poor kid! LOL
VICKY IS THE COOLEST PERSON! She's an amazing wife, mother, and is a good friend to others. A perfect lady that brightens up the room with her warm smile 😁. She always helps out and chips in to help as best as she can for the people she loves. YOU ROCK VICKY! Keep up the good work on taking care of your amazing racing family. Another great video 📸. Have a good day today 😎🌞. Thanks.
I'm glad Mark is a staple on this channel,,,, the banter between him, Bill and Bucko is great
The compressor switch is high pressure. The dryer switch is low pressure. They both should be present. They are wired in series. Too high or too low, the correct switch opens and disconnects the 12v dc from the compressor. Do NOT install it on the dryer.
😂😂😂😂😂😂😂😂
"It works when it's empty" had me rolling.
That hair cut commentary was perfect 😂
Everytime I watch your videos it reminds me of days gone by granted we didn't run cars of your caliber but it still takes me back to that place and time.
It works when it's empty! 😂😂😂
Hope you're all having a fabulously blessed holiday season!
~~Dave
Look forward to see the sick week run! Don’t forget to have fun along the way no matter what happens!
Can’t wait to see the 55 back at your place!
I just picked up a nearly rust free 55 4 door 210 and plan on doing a 2 door conversion and a nice small block swap. It has 72k original miles and the 6 still runs like a sewing machine.
The A/C switch is a high pressure cutout. It won't work putting it on the accumulator.
Yes Correct, Needs to plum in the High side, when he has new hoses made add the valve core fitting to screw it back in.
I was wondering that, question is, where was the low side switch at? That a fixed orrifice tube cycling clutch system, correct?
Yes. That's high side on compressor, not low side. Almost made the same comment to let him know. Nice catch. 😊
Uncle Bob thought just by taking on your guys's engines that he'd get a little bit less work seems like he's doing just as much work 😂😂 he's awesome
THANKS FOR SHARING AN AMAZING LOVING FAMILY MOMENT, THE MODEL FAMILY UNIT THAT OTHERS CAN ADMIRE DURING THE HOLIDAYS. Great video that's very appreciated! Keep up the good work 👍. Have a good day today. Loved the video! Thanks.
Very informative Bill. Let the good times roll. ✌✌✌✌✌✌
MY FAVORITE GARAGE CHANNEL !!!
BILL HOPE YOUR FAMILY HAD A MERRY CHRISTMAS AND I WISH YOU A HAPPY NEW YEAR 2025 !
GOD BLESS 👍🏼😁👍🏼
I like when he said, it’s work when it’s on empty 👍🏽
Good times with family during the holidays ✨ and working on cars ✨ my kind of people 😊
Good luck down in Florida! Love your channel!
I'm glad you all had a awesome Christmas, Wyatt never fails to put a smile on my face, he's such a happy boy with awesome parents and grandparents. I'm impressed with your 427 sb Bill for it to go that long after the oil pressure issue, that's a true testimony to uncle Bob's work. Hope everyone has a safe and happy new year. I'm looking forward to the sick week video. God bless and as always be safe.
Merry Christmas and Happy New Year to the whole OMG/SRC Family!
Great to see the whole family having fun.I can't wait for Dad to see the 55 with that beautiful paint.
Nice seeing everyone have a wonderful Christmas.!
Uncle Terry is such a wholesome guy.
Good video. I appreciate you sharing your love for family and fast cars with me. It means more than you know. Happy New Year ya'll!
That was too funny. We’re old enough to read script writing God love you guys.
See you soon Bill! Good luck getting everything sorted!🤞🤞🤞
Damn Bill- was just working on my buddies car for Sick Week, im eyeball deep in, gonna be fun!
More stroke, goes good with NX. When a roller doesnt roll,it's wiped.
Their is a way of cutting the locks off the rod bearings. Somehow pen the bearings. It keeps the bearing from spinning. I've seen literature in a GM machinest guide. It had the 3.8 Buick. All the stainless crank motors. Geometry of cutting rotating mass. I'm sure,Bob has got em all, Ford Bible.
I'd like to see, secrets, and process, of a build,in depth. Well I thought it would be good content.
Thanks for the ride.
Sick Week should be fun.... Have a safe and fun New Years..
Everytime I Built a 400 SBC and used Non 400 Heads with Steam Holes
I always Drilled the new heads to eliminate dead areas between Syamese Cylinders on a 400
The old mans old man sure looked happy holding and petting that ween!!! Maybe ol dad needs a 4 legged friend!❤
Malibu looks good old man. Come on south, weather is nice. Sunshine and blue skies! 😎 👊
You guys had me laughing fussing about the fuel gauge. You are a very fortunate man to have her for your wife.I really look forward to your videos Bill, you have a knack for this stuff.
Bill thanks for another great video. I look forward to seeing all of your videos and adventures in life. Thanks again for sharing the best family and friends anyone could ask for. Merry Christmas and Happy New Year
I like the fact that the Old Man is more consistent with video drops than the kids. 👊🏻😎 He’s going to surpass the kids channels before long.
Good luck getting all put together for sick week !! Happy new year
One of the benefits of working nights. Thanks for the upload.
Poor old Uncle Bob's up to his arm pits in engines. I thought you were going to make his life easier lol.
He didn't look to happy he's probably thinking " what have I got myself into "
Bill I think you're gonna like the soild roller. I've put 3000 + miles on a old old .600 roller in my Nova.. it's old comp stuff with a rev kit. Took valve covers off once to check everything and no problems at all. Didn't even have to reset lash
This is why I love my dart shp block. Primary main oiling so you hear valve train noise first anytime there is oil level issue. I can't count how many times this has saved me, kinda embarrassing to admit but it is what it is race car motor and ring gap makes a fun driver but needy when it comes to fuel and oil.
Hope y'all have a great year
Your channels have kept me believing I can also build my own hot rod
Please don't stop
Bill, that sucks about the 421. I was always lery of something like that on my 421, which is why i installed an oil pressure switch and a bright-azz Autometer light...just for oil pressure (or actually a LACK of pressure). If that light EVER came on then I could instantly kill ignition and coast to a stop, wherever I might find myself.
Glad to see the Malibu has an engine to use until yours is rebuilt. Sucks to see it messed up though.
Happy New Year!!! Can't wait to see what bring on 2025 for y'all! It's getting bigger and bigger than ever for anything y'all put mind into! Have a great journey!
Awesome video and Happy New Year 🎉🎉🎉❤
Just what I needed for this Monday morning another video from da ol man thanks Bill for everything you do I love all of your families channels Happy New Year ❤
Up with heartburn! This video couldn't have come at a more perfect time! Thank you! 😊 Tommy's motor is looking sharp in the Malibu! Can't wait til all the electrical and nitrous issues are fixed so we can see what it runs! So glad the nitrous didn’t spray in Florida so you can still use that motor! 😬
I had heartburn for YEARS. Fixed it 2 years ago but doing a 7 day water fast, haven't dealt with it since and it was a almost daily issue before.
@@bustedknuckles6051Interesting have to look this water fasting up,I suffer from heartburn and don't like taking meds. Their just a temporary fix and my gut doesn't like meds either. Take care of 1 thing 4 another issue to show itself.
@@bustedknuckles6051 interesting!! So just water and no food for 7 days, or water as your only beverage for 7 days?
@@KTL72-ul7ej just water and black coffee, no food. I did make some homemade electrolytes with a recipe online called snake juice to keep from getting cramps or anything.
@@kaedyncopper12 exactly. Don't over complicate it, the only thing I would recommend is doing keto for a week or two leading up to it or it really sucks. Last year I did it and didn't eat keto leading up to it and dealt with nausea and feeling absolutely terrible the whole time. Ended up quitting on the 6th day because I was dry heaving, but the year I did it following keto It wasn't even that bad, just a mental game.
There's always something, isn't there Bill !! Little things that bite you and take time, but it looks like you've got it under control. And another family adventure is sooo cool ! And as I've said before--Wyatt has no idea how great his life is, and will continue to be, with a family like yours ! Hey, I was watching House Of Pearls last video on dad's '55 and it's looking unbelieveable !! That paint is like liquid glass---so deep !! HAPPY NEW YEAR everyone.
Bowl cut, poor little guy!! I'm hoping your Christmas was excellent. I hope your upcoming new years is safe and fun!!
Good luck Bill! Hopefully all goes very well for you guys! Have fun and be safe ❤
Happy new year, and a late Merry Christmas to you and your family bill!
Thanks for the Christmas light tour. A Very Merry Christmas and Happy New Year from Montreal Quebec Canada.
Happy new year guys it’s the year of freedom 🇺🇸
dang bill,im up 156 am with last beer,now i gotta stay up later lol.
Can't wait to see that notice come on love this channel best stuff on you tube
What a great surprise Sunday night video saw Dad‘s 55 house of pearls video. Outstanding Can’t wait for sick week. Wish you guys luck. Enjoy the experience. Merry Christmas and happy new year.
Love all 3 channels.. Happy New Year to all of yall...
Happy New Year! Good luck in Florida!
I can't wait to see you guys at Sick Week. Looking forward to the festivities
Merry Christmas Bill and family, thanks for another great video!!!
the switch on the compressor is high side cut out. the other one is low presser cycling.
Steel rocker arms will save you a lot of headaches. got tired of replacing the aluminiun rocker arms one at a time before switching over.
thank you
Happy New Year bill and Vickie and the rest of the Hoskinson family...
Looks like everyone had a great Christmas! Hope everyone has a wonderful New Year's!!!
Happy New Year from South Florida !
Hell, yeah man keep the videos coming merry Christmas to you and your family and a happy new year to y’all. Hope y’all have a good and keep the videos coming. Can’t wait to be on y’all level one day my channel.
Wishing a Merry Christmas and a Happy and Prosperous New Year to the entire Hoskinson family !
Happy New Year Old Man🤙🏁🏁🇺🇸🇺🇸May the wind be at your back!
I hope you guys had a good Christmas and happy new year and good luck and be safe and God bless you guys
Merry Christmas to you and your family And a Happy New Year🎉🧨💥🎊..🙏🇺🇸
Merry Christmas and Happy New Year !!
Thanks for letting us come along for the ride 🙏🏾💪🏾🇺🇲✅💯👍🏾
I'm not sleeping tonight.Just wish I could go to work now. Really appreciate the video Bill
Merry Christmas OMG Bill, Mrs.Vicky, and Family and Team, Friends
Have a Great Day 👍
God Bless You and your Family 🙏
Ya you TANNER
Mannnn part way through now. I hope that kid had a good Christmas and mom and dad came to their senses and just buzzed the rest off. It’ll grow back, shit happens!
Ive had to massage those cast BB valve covers before. Had to cut back corners off on a diagonal and weld flat plates in to clear firewall. After repolishing them they looked fine.
Haven't. Read. The. Comments. But. I. Use. To. Drill. 1/8. Hole in. Hinges. Door. Or. Hoods. When. U. Take. It. Off. Then. When. U. Install. 1/8. Drill. Each. Hole. Tighten. No. Adjusting. Take. Thick. Touch. Up. Paint. In. Hole. It. Works. For. Me. I. Hate. Adjusting. But. Unless. It. Needs. It. To. Begin. With. Great. Video. Thanks. To. All. Family. And. Bob. An. Mark. Everybody.
TKS for sharing an may U All have a great new year.
Merry Christmas and Happy New Year to all of y'all as well Bill.
Great video! Can't wait to hear Marks BBC!
Best channels on UA-cam. All 3 rock!
Shifting at 7000 into 3rd at Bradenton noticed that oil pressure was 0😮. Took the 468 Chevelle engine apart. I got lucky it was fine. Just a broken oil pump shaft.
I see you still have the bypass in the filter adaptor on the 421.
Block that bypass, a lot more oil than you think goes through that bypass. Just tap it for a 1/4” pipe plug, and install a hex pipe plug from the inside of the adaptor.
Don’t use a wix racing filter. They don’t filter as small a micron partical. Use one of these filters.
Mobil 1 M1-302
Wix 51061
Purolator PBL34631
Fram Ultra Synthetic XG5
Ac delco PF1218A
AC Delco PF35L
Baldwin B6-HPG
Donaldson P166564
Fleetguard LF3488
K&N HP-3003
Thanks for the video bill 👌👍
Hey Bill! Once again another fantastic video! Always look forward to every new video. As always stay safe. 😃😃❤️
Im excited to see Marks car back together, hopefully we see it running down the track at some of the events you all are at!
Thanks for everything
Can’t wait for the next video, really enjoy watching your videos.
Hey Bill I would like to wish everyone a Happy New Year
Happy Holidays!!!
Happy holidays and better new years src family
That Pontiac 421 super duty dual four barrel is a beautiful engine and when paired with a big bore intake and a big single carburetor especially with a couple plates that's a nasty engine I like it a lot.🤟😎🇨🇦
Looking forward to finally meeting all y’all at Gainesville. Oh yeah the ol lady is disappointed Mrs Vicki isn’t coming haha
I lost my father a few days before Christmas... Christmas was a hard pill to swallow!!
Good luck to you all and Happy New Years.
Merry Christmas to you and your family !!!!
Happy New Year to you, viki and family. Can't wait to see the sick week event, always fun to watch. Some day I'd like to go and participate. Even if just to follow along.
I love your videos always learn something