Lion Head Ring - 3D print to solid metal - resin home casting with VOGMAN
Вставка
- Опубліковано 10 вер 2024
- I saw a ring by 3D artist Printed Obsession and I just had to have a go at casting it. I began by printing it on the Anycubic Mono X 6K using Siraya Tech Cast resin, encased the prints in investment plaster, cooked it in a burnout oven, poured metal and polished. I wasn't quite that simple, but you get the idea 😁
** LION RING CREATOR **
My thanks to Printed Obsession for this excellent ring design.
/ printedobsession
printedobsessi...
www.myminifact...
══════════════════════════════════════════
💚 V O G M A N S P I C K S 💚
Best Castable Resins ▶ tinyurl.com/2v...
Best Budget printer ▶ tinyurl.com/52...
Best DLP printer ▶ tinyurl.com/43...
Best Standard printers ▶ tinyurl.com/mr...
Best Midrange printers ▶ tinyurl.com/3w...
Best Large printers ▶ tinyurl.com/2p...
══════════════════════════════════════════
** LINKS **
vegoilguy.co.uk
/ vegoilguy
/ vegoilguy
etsy.com/uk/sh...
/ vegoilguy
** EQUIPMENT & PRODUCTS USED **
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here vegoilguy.co.uk...
** PLEASE SUPPORT THIS CHANNEL **
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here: / vegoilguy - Or if you prefer to make a PayPal donation, you can do that here - www.vegoilguy.co.uk/donations
** DISCLAIMER **
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
** ETSY STORE **
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel. www.etsy.com/u...
#3dprinting
#lostresin
#metalcasting
#vegoilguy
#vog
Please consider doing more testing with this. I use the same resin and am really interested in what the least amount of faffing about is necessary to get a good result. Are all the water washes necessary? What about the glycerin curing? Questions like that would be very interesting to explore.
I'm glad you did that. I plan on giving this stuff a go this winter (the resin has been patiently waiting for my attention).
Thanks, VOG!
Glad I could help!
The scientific method require for the results to be repeatable so it would be interesting to see this test repeated a few times to see if the differences remain the same as for this one. The ring looks great anyways and the model is top notch.
Absolutely. That's why it's interesting but certainly not proven... though it does support the information I was previously given, so I guess we have to give it to Siraya Tech 😁
It would be interesting to know the chemical processes of why the "wrongly cured" print had issues with the casting process. As you said, the two prints looked the same after curing so there must be some chemical or structural difference that causes the tiny pits when the wrongly cured one is cast.
Oxygen I believe. It gets trapped whilst printed but spoils the casting process. 😁
I wondered if the glycerin actually made a difference but haven't had time to do a comparison. Thanks for doing this.
It was a worthwhile experiment. I guess all that Oxygen business really does matter. Take care Dick 😁
Those little imperfections actually make it look a bit older, like low tech casting techniques... I think for certain applications (like heirloom rings) it gives even more character, while obviously other things require perfection like the properly cured one =) Very nice result and glad to see some casting again!
Remember the old days with tinkering videos and tracked lawnmowers? X"D
Remember them? I miss them 😁
I was saying to my son earlier today how I miss having an ongoing project, such as the lawnmower or the electric furnace... something to get me thinking and take several weeks of building. I would do something like that in a heartbeat, if only I could think of something.
The only thing that comes close is my desire to convert a big diesel 4x4 to electric, but that would take a lottery win. I could never afford it... but what a fun project that would be.
Great video and I'm glad your on Instagram thanks with the help
Thanks. I'm really enjoying it 😁
Good to see you back casting again.
I've had a lot of distractions lately, so it was good to have a go again 😁😁😁
Again a delightfull video, thank again. A lot!
Thank you too!
Nice i like it
Hell yeah buddy!
Great rings BOTH of those!
Thanx for the faffing and non faffing results!
I'm sure you'll be back to the faffing madness before too long! LOL
The ffaffing ring is definitely what most would prefer.
However, the unfaffed ring has some character that others would find irresistable!
Thanx for your honesty and meticulous approach once again my friend!
Have a great weekend Geoff! :D
Faffing is what it's all about Cap 😁😁😁
Thanks for sharing
Thanks for watching! 😁
Porosity is caused by the sprue system not being as thick as the thickest part of the models cross section. One sprue in the right place would have cured the imperfections. I'm a jewellery caster by trade. It's black art in itself. Prey to the casting god's. Love your videos
Another great video, quite enjoyable to watch your smooth process! 🍻
Glad you enjoyed it
Amazing video!! Thank you!! 🙏👌🫶
Glad you enjoyed it! 😁
dude, you should try with some graduation rings, with logos and numbers
Cool
Thanks 😁
Love your videos, the ones about casting are my favourites. Please continue with them, some day i´d like to have my own diy cheap casting equipment.
Glad you like them! 😁😁😁
You could use an ultrasonic cleaner with ipa to clean up the print with IPA It gets quite warm and allows the supports to more easily come off and all the uncured resin is removed, ( this is against the manufacturer instructions )
Nice job. Looks very cool!
Thank you! Cheers John! 😁😁😁
Thanks for sharing 👍
Thanks for watching 😁😁😁
Great job Geoff! Nice coffee bean to differentiate between the two lions! I hereby name the imperfect Lion "Beanie"... It may not have been an absolutely scientific conclusive test, but, it sure produced a pretty obvious result. I think they both look great by the way 😬
Thanks Dan. After a month of wearing, they'd probably both look the same anyway 😁😁😁
Great video just wish I could start casting.
Like everything in life, it will happen if it's meant to happen. Take care buddy 😁
So would how would you use glycerine with an elegoo wash and cure station? Would you only use this for castable?
is it possible to get good results without a vacuum caster?
What temperature is the flask when the molten metal is being poured? I thought you said 220F on one of your videos but I cant seem to find it right now. Thanks, great content it has helped a lot!
Please visit the subject on curing and casting again! I've experienced the same pitting on my castings as well, don't know what it could be, thanks love your videos
I actually liked the rings better in the unpolished state :)
I also like the weathered look. 😁
Ďakujem za vaše videá, veľmi mi pomohli. Osobne používam živicu Burn a som s ňou veľmi spokojný( aj na základe vašich videí) . Skúsim tento postup použiť aj na ňu. Pekný deň Vám prajem.
Vďaka. Mohlo by to pomôcť s Burn. Veľa štastia.
can you do review hout to setup proper small casting project.. would really love those tools.. some of them I already have like compressor. dremel rotating tools and 3d print..
The science on why you used glycerin was interesting. I have a question about this curing process, have you tried making a silicone mold after it is cured in glycerin? I wonder how this casting resin would react with the mold compounds after your curing method.
Typically 3D printed parts need a coating of something like Inhibit-X or the print reacts with the mold material. It is 3am so I cannot remember if it is Tin or Platinum based compound that reacts with the prints. This resin is different, as you demonstrate by burning it out, so I wonder about its other properties. If it can be molded right away this would help many people who make jewelry (not metal cast), dice, or game pieces.
Those are good questions, but unfortunately it's not something I have experience with so I can't answer 😁
what setting are you using? also is that a elegoo mars 2?
Ok so the air is stuck in it.. well you have a uv light and a vacuum chamber.. can you cure it while under a vacuum?
Actually vacuum curing and vacuum casting are techniques that are under study by cleverer blokes than me 😁😁😁
I'm interested with that scratch remover and the polisher. What's the brand bro?
First comment! great video
Many thanks 😁
use washing up liwid when there waxs let dry
Can I use a Water Washable Elego Resin to do it?
Hello. Is there a difference between 4K models and anycubic Photon Mono X 6K models ???
Yes, the 6K will give you better printing results and a slightly larger print. Check out my video on the subject ua-cam.com/video/CaL3iA421mg/v-deo.html
Hi I would like to ask which kind of printer do you use and which slicer do you use thank you
Interesting test, great design for a door knocker not sure about it as a ring lol
We don't do jokes about knockers on this channel. 😁😁😁😁😁😁😁
Thanks for another great upload!
Have you ever tried to use an elegoo resin?
Can you burn it out in the kiln similar to casting resin or is it 100% not doable?
ALSO I what would you say is the most cost efficient casting resin?
I currently use blue cast x10
I've tried "ordinary" resin in an experiment here - ua-cam.com/video/8p7I8IVmpSo/v-deo.html - though it was Phrozen resin. My guess is that all non-castable resins will produce similar results. After all, the right tool for the job... 😁
If you like X10, you really should have a go with X1. Bluecast really excelled themselves there ua-cam.com/video/nrnNH1Ji2DE/v-deo.html
Is it possible to cast a plastic injection mold from a plastic sprue?
Using Ancient Bronze, what is your crucible and flask casting temperatures please?
Be guided by the data provided by Riogrande 😁😁😁
Can you do some simpler home casting with bismuth, tin and/or lead?
26-01-24 watched 😊
👍
How much space do you need for a workshop to do casting? Can it be done in a garage or do you need a dedicated space?
Well I cast in my garage 😁😁😁
@@vogman oh haha nice. Is your garage part of your house or is it a separate building? All the fire and molten metal makes me a little nervous about potentially causing a large fire.
That's funny. I was preparing some pieces using this resin today, I was convinced as well as the curing in glycerin, that one couldn't expose these to water. Am I completely off my chump?? Would make life easier if I could give them a quick rinse.
No... water contains oxygen. Doesn't work... got to be glycerine. It's messy, but it does the job 😁😁😁
If you revisit this, do a Unicorn ring, then a Dragon ;)
I was thinking of that... when I was at school I had to paint the Royal Coat of Arms (Lion and Unicorn) and later painted the Welsh Dragon, so these thoughts were in my mind as well 😁
Instead of vegetable glycerine, would vegetable oil work instead? Much cheaper.
I've no idea. I've never tried it.
@@vogman already purchased the glycerine but I might experiment with oil. Thanks for all the great content it’s helped me out a lot ❤️
Just wondering did you get a sonic mini 8k I would love to see a review of that?
I'm hopeful to have one soon 😁
Why did one of the rings have flaws? Nice work!
It's all about the curing process. Curing in glycerine lets the print shed oxygen and improves casting 😁
love the details on that ring.
question - how do you know when a print is cured with this resin ?
also, are you strictly following that burnout you post a screen shot of ?
I haven't been able to get a clean cast with this resin yet :(
I'm VERY generous with curing. 1 or 2 hours is quite typical for me as I know how important it is. Once printed, clean immediately and get it into glycerine as soon as you can. Once cured, cast it as soon as possible. Don't leave things hanging around for days, but if you have to, try to vacuum store them 😁
both look perfect to me but i'm no perfectionist I'm surprised I could actually notice imperfections after they were pointed out
You have to look closely Shane, but the flaws are there. Both look pretty good though 😁
You forgot to put "viking" in the title.
Good point 😁😁😁
Cool
😁😁😁