Grizzly G0513 Bandsaw Guide Bearing Upgrade and New Tires
Вставка
- Опубліковано 7 вер 2024
- We are installing a Guide bearing upgrade on my Grizzly G0513 Bandsaw. This bandsaw comes with euro style guide bushings, or ceramic bushings. The guide bearings are a very nice upgrade for these saws and I wish I would have done it sooner. I also replace the bandsaw tires and I show how to do that. I hope you enjoyed the video and maybe learned along with me.
Please consider Subscribing and Hitting the notification bell.
Alex's Bandsaw setup Video : • Band Saw Clinic with A...
My Circle cutting Jig Video : • Make a Cheap Circle Cu...
I am going to pull the trigger on the Grizzly bandsaw! I can't believe I have been watching for 5 years! Semper Fi Brother!
Jamey Mikels Awesome!!! You have been here from the start!! That’s amazing!! Just made my day Brother!! 👍👊
@@JakeThompson I have.... I am the one that bitches when you move the Patriots flag! LOL
This video is great for showing how to do maintenance on the Grizzly G0513. It's also an awesome look inside this bandsaw before someone buys it. I like to see in detail how a saw is built before buying one. It looks well made, and easy to adjust. Thanks Jake!
Bear Creek Woodworking These saws are pretty nice! Grizzly does a nice job on making the parts readily available and easy to look up also.. Thanks for watching Carl!👍
Another winner Jake. Still not getting notifications from You Tube for any of the channels I'm subscribed to.
Steve Gronsky I’m not sure what’s happening Steve.. it’s all good on my side. Have you clicked the bell and selected all notifications?
@@JakeThompson Absolutely. It's not just your channel, it's everyone to which I'm subscribed.
Nice! I hate the guides on my saw. They are very similar to your old ones. I swapped my tires to the orange urethane tires. Best way I found is to leave my wheels on, zip tie the tire about half way around the use a heat gun to warm the tire up, stretch it on and zip tie and progress made before moving on. The nylon pry tools for car interiors is good to use for extra leverage
Brads Workbench Awesome!! I should have used some interior tools.. I have some.. lol
@@JakeThompson i figured u did lol.... i saw that ratchet u used 😉
JAKE GREAT BAND SAW UP GRADE WITH THE BEARING AND WHEELS .THANK YOU. THANK YOU .FROM DOUG
Fleets Wood Shop Thank you Doug! 👍👍
Thank you Jake thank you it's always a pleasure watching you . From Doug
Awesome information. Thanks Jake. Always appreciate it.
Lakeshore Woodturner Thank you for watching!! Glad you enjoyed!👍👍
nicely done Jake
jp woodwork Thanks Brother!!
Great video as always. Very informative and detailed. I will be upgrading my Anniversary addition very soon.
Wackey Worx Workshop Awesome!!👍👍
Good use of a pen blank! Interesting how they balance the wheels by removing material versus adding weights. It’s always good seeing maintenance videos Jake! 👍
Turnings by Turner The pen blank works pretty good.. I wasn’t sure what to use and as soon as I saw the blank... I was like... yup.. that’s it! 👍👍😂
Please make some more bandsaw videos. Really enjoyed and benefitted from your efforts. Thanks
Thank you very much.. I’m glad you enjoyed the video.. I have a couple bandsaw jig videos on the channel too.
Great video on the band saw upgrade, I have the same saw, now it will be much easier. Thanks again.
Anytime Doug!! Thanks for watching. 👍
Great video J. They also suggest that you place a screwdriver under the new tire once it's on and move the screwdriver under the tire around the entire wheel. The new tires can stick and hold tension in certain areas after they've been heated up. Doing this ensures the whole tire is relaxed and can move evenly while it dries. Thanks for sharing. V
Mike Villafuerte Thank you Mike.. Glad you enjoyed the video!👍👊
Good video man I would thought ceramic bearings were better but yours looked like toast.
Dan The Maker Man Thanks Dan.. They lasted for. a long time, before I did them in.
Great video sir!! Hoping to be going through a big bandsaw in the near future, I will be referencing this video and the Snodgrass one you recommended 👊🏻💪🏼👍🏻💪🏼👊🏻
NYWoodworX I can’t wait to see you go through that huge Bandsaw! 👍👍
Great video Jake!! Every wood worker needs to know this stuff, great maintenance tips brother!
Jordan Woodwerx Thank you Buddy!!👍👍👊
Another great informative video. Thanks Jake.
Michael Thomas Thank you Buddy!!
Thank you Jake. I've had my G0513 for about 15 years. It shipped with those Euro style guides. I'm well versed in how to adjust everything, but lately I've tried resawing and since I'm getting a lot of drift I end up with inconsistent thicknesses end to end and comparing multiple pieces. The blade is tensioned correctly. Could the culprit be the OEM guides? Lastly, are the guides you installed by Grizzly, Carter or other?
I got them from grizzly. Mine seems to be better at everything since I changed them. 👍
great video...is there a part number for the bearing kit, all grizzly shows is for 14 inch bandsaw
H9565 is what I bought.. Thank you
Great video!! 2 questions, where did the upgrade bearings come from and who makes the blade used in the resawing. I'm new to bandsaws and resawing. I have Grizzly G0513. Thanks Joe
Thank you Joe.. The upgrade bearings came from Grizzly and the blade is from Timberwolf.. I bought them both from grizzly 👍
As all way good en thanks
Eddie Hall Thank you Eddie!! 👍👍👊
great vid...
Manic Maker Thanks Buddy!!👍👍
Is that a Carter upgrade?
No sir.. it’s just an upgrade from Grizzly
Cool, just ordered a bearing kit. Is there anything that needs to be greased on these machines?
Thank you Bruce.. all the bearings on this machine are sealed.. no greasing is required.
How quiet running is the saw with the blade installed? Do you recommend Grizzly bandsaws over more expensive brands such as Powermatic?
The saws are very quiet.. I’ve never used a powermatic, so I couldn’t tell you about that..
Do you have the part numbers I don’t see the upgrade on the Grizzy site
Sorry for the delay.. it’s model H9565
Mine didn’t come with the small bearing for the lower blade support. I see you had a new one, buy it? Or included?
The kit part list did not indicate a new one was included. How cheap of Grizzly. Its a 6000z.
It’s been a few years since this video but I’m sure I had to buy the small bearing separate.
👍nice
THEAPRILFOOL 1983 Thank you!!
👍🏻👍🏻
Kelley Sanders 👍👍🤓🤓
Hey Jake, nice video! Just curious why you have two band saws? Do you have help in the shop when you are not videoing?
Thank you for watching.. when I first started I did lots of shapes with the bandsaw.. my table saw scared me at the time so I bought another bandsaw to re-saw and do straight cuts with. I’m happy I have them both. 👍👍
Did you get the 17/19 kit or the eurokit
17/19 bearing kit