17" Grizzly Bandsaw G0513X2 Unboxing//assembly//review
Вставка
- Опубліковано 23 січ 2023
- Ive been saving up for quite a while to buy this bandsaw from grizzly. I hope that this video is helpful to anyone looking to purchase this unit.
Let me know if you have any questions,
Tanner - Фільми й анімація
Bought the same one last year, I was laughing when you tried to open the bottom. I did the EXACT SAME THING🤪
When you redo the base, reattach the corners to push them sideways, foot pedals to the right side. 1- you can easy reach with your right foot, not go around to the back 2- push and pull is safer with the longer side of the base as opposed to the short front/back possible tip over
Fence tape, same issue. No way around it without making a new measure tape to attach, etc, future project
I love mine, a real beast to move without a mechanical lift of some sort, last bandsaw I will need to buy in my life, but it will be the kids problem to get it out of the workshop after I am gone 😅
You will enjoy it, have fun
Glad I'm not the only one who made the door mistake! So far I'm happy with it was well, absolutely tank of a band saw.
Thanks for commenting
Thanks for posting. Got my new saw out of the crate yesterday. Will be setting it up today.
Awesome, it's a beast! I think you're going to enjoy it
you cant get carried away with WD-40 on cast iron. I usually let the cast iron table soak in the stuff over night. I dont know if it does any good letting it just soak in the stuff but it certainly puts my mind at east
I definitely go heavy on the WD40 when im cleaning things up. Ive also started using boesheild often for a lubricant and it works great!
The rattle/chatter is most likely coming from the blade bearing guides. The manual says to set them at .004” clearance and I noticed in the video you have .016”, you might start there.
I don't believe it's the bearings I've played around with the clearance on them quite a bit with no success. I'm actually leaning towards the blade itself being slightly out of wack
I set mine up and cannot get the fence to square to the blade vertically. I have the fence square horizontally, like to the miter track. Really frustrating and Grizzly didn’t know how to fix it literally gave me zero options
Where do you buy the T9? Nice video, I just put mine together after a couple of years sitting in the corner of my garage for a year still in the plastic.
I might mine off of Amazon
Bought mine yesterday
Nice! I'm pretty happy with it!!
Have you figured out the noise you were hearing and did you get a fix for the measuring tape being off?
I have not figured out either of those issues, it cuts great but still has a bit of a rattle
@@BuiltKnotBought Is the measuring tape off because it's not meant to be used with the resaw fence attached? Like is the tape accurate to just the fence itself? Thanks for the video!
@@MarkBorrelli that's a really great question I'll have to take the resaw fence off and see if that helps, you might be on to something here! Thank you
what kind of wire did you use just bought the same saw
What size motor do you have in this model? I belive I have the same one at work and it has a 3hp motor and it dosent cut worth a dam
I believe mine is 2hp, the first thing I'd do is try out a new blade, sometimes the factory blades stink
Sorry mine is a 3hp I just double checked
So were you able to 0 the fence?
No I wasn't, someone mentioned that it might be off because of the resaw fence extension
@@BuiltKnotBought so are you happy with your band saw? I have been looking at the 40th anniversary edition.
@@luisurbina5115 yeah I'm really happy with it, I use it often!