The current raider feels like it falls into the same class as an MP7. Overt, but small. I think a covert/compact raider would be sick. Chop the grip to accept 15rd mags, chop or lower the sight tower, and maybe change the side the lower portion of the brace so it's easier to "draw" from a harness or slinged postion. I think it would fill the niche between the current raider and the original Glock pistol brace.
Those charging handles are cool. Really like the side mount one but I'd get concerned about it snagging when pulling out of a bag. Maybe extend it by a half inch or so to the rear and then chamfer the difference in material. That might fix the snag hazard.
Awesome to see you here! He designed it quite well, I was surprised to have no complaints (I have complaints about every design, including my own, even the Raider) and it doesn’t snag on the extraction. It can snag when inserting it, but that isn’t as big of a deal.
I’ve been practicing drawing form my bag and it has always come out pretty smoothly. Very well could be just my bag though haha. I think the top charging handle could fit that anti snag desire.
The side mount one is total garbage,, do not waste your money. The support team (when they chose to respond days/weeks later) does not stand behind the product. My very seasoned armorer followed the installation video to the letter and the product snapped while doing a simple function check. support said that ~99% of these fail when installed by 3rd parties even though they defined the install process in this video and a few others. You have been warned.
As a lefty, id love to see that vertical charging handle pull double duty as a front sight for the backup irons. You could just cut a notch into it with a basic white dot front post.
@@sunnycat69 Yes but each brace is paired with the rails because tolerances are so tight so we may offer an install service to make sure that the spring loaded brace ejects properly after swapping it.
Ok bros, what's the deal with upgrading the trigger on the raider? I've heard there are some triggers that won't work with the raider chassis, but the standard p320 trigger is ready to retire. Any suggestions?
Hey man! All aftermarket triggers work on the Raider. The only thing that won’t work with the triggers is the built in manual safety. Aftermarket trigger shoes have different geometry than the OEM Sig ones so the Raider manual safety block doesn’t fit in the area it needs to fit.
Hmm I haven’t. Not sure if the first Gen fcu’s were slightly different on tolerances. If that issue doesn’t go away definitely email me at alex@fluxdefense.com and we can see if there is some material that needs to be removed to allow the mag to drop better.
The SBR chassis is exactly the same as the pistol brace version. The only difference is the end piece. The stock end piece will be available within the next two months.
I just bought a third party Raider holster to see what it brings to the table. Our holster is going to be injection molded and the mold is going to be super expensive so it is taking time to save up for.
So happy Sig came out with the P320 Flux Legion!
The current raider feels like it falls into the same class as an MP7. Overt, but small.
I think a covert/compact raider would be sick. Chop the grip to accept 15rd mags, chop or lower the sight tower, and maybe change the side the lower portion of the brace so it's easier to "draw" from a harness or slinged postion.
I think it would fill the niche between the current raider and the original Glock pistol brace.
You can chop your tower and run slide mount n chop grip boi's at ux run the chop mod aswell 👌🏻
We are looking into a P365 chassis with those intentions in mind.
@Michael Scheidle we will. There is no way are going to put serious dev time into a new thing until we know we can make at least one product haha.
Those charging handles are cool. Really like the side mount one but I'd get concerned about it snagging when pulling out of a bag. Maybe extend it by a half inch or so to the rear and then chamfer the difference in material. That might fix the snag hazard.
Awesome to see you here! He designed it quite well, I was surprised to have no complaints (I have complaints about every design, including my own, even the Raider) and it doesn’t snag on the extraction. It can snag when inserting it, but that isn’t as big of a deal.
I’ve been practicing drawing form my bag and it has always come out pretty smoothly. Very well could be just my bag though haha. I think the top charging handle could fit that anti snag desire.
@Ben Griffith As long as it isn't snaggin on the way out I'm good with it!
The side mount one is total garbage,, do not waste your money. The support team (when they chose to respond days/weeks later) does not stand behind the product. My very seasoned armorer followed the installation video to the letter and the product snapped while doing a simple function check. support said that ~99% of these fail when installed by 3rd parties even though they defined the install process in this video and a few others. You have been warned.
@RayDCO I have two slides with the side mount Ripstik. They have been solid for like two years now. I wonder why yours broke.
RIP buy button
Where to get muzzle hood/protection that you showed ?
Love you guys ODG GANG approves 💚
Haha ODG goes hard in this one
odg raider when ;)
@@Jojoffuuu yeasss pls gibb
Sweet!
🔥
You guys are awesome. Very interesting video with two smart goofballs
Haha thanks man. Very accurate, we are just goofballs.
How about a top charge with a side appendage offering both features?
As a lefty, id love to see that vertical charging handle pull double duty as a front sight for the backup irons.
You could just cut a notch into it with a basic white dot front post.
It does have a front sight built into it! Has a green fluorescent dot that you can use with your stock rear irons.
Make a roller pin on the side of the slide and it can fold forward for holster
The grip could use some work compared to an actual p320 and a bit of magazine rattle
I'd like to see some lefty sling mounting options. Maybe a left hand brace? I know it's been mentioned just came here to bug you about it lol.
Haha I have a lefty brace that I am testing. I will do a video on it for us lefties. If it passes my testing then we will make a production run.
@@overtimealex69 Noice! I noticed yours was mirroring. I hope testing goes well 👍
@@overtimealex69 will it be a retrofit brace we can instail ?
@@sunnycat69 Yes but each brace is paired with the rails because tolerances are so tight so we may offer an install service to make sure that the spring loaded brace ejects properly after swapping it.
Would there be any Left handed QD spots for the pistol brace coming out in later models?
Not on the chassis itself but yes on the rear brace portion.
Where can I get a single point small sling for the Flux Radier
Ferro Concepts or Haley Strategic
Can you build a cheek extension . IE make it into a cheek pistol?
What suppressor is that?
Do you have a sling that will hang in front of you chest
Is there any manufacturer that makes anything like your demo for a glock 29 10mm
Ok bros, what's the deal with upgrading the trigger on the raider? I've heard there are some triggers that won't work with the raider chassis, but the standard p320 trigger is ready to retire. Any suggestions?
Hey man! All aftermarket triggers work on the Raider. The only thing that won’t work with the triggers is the built in manual safety. Aftermarket trigger shoes have different geometry than the OEM Sig ones so the Raider manual safety block doesn’t fit in the area it needs to fit.
Dude, perfect. That's good to know. I appreciate it. Now I just have to figure out what trigger to get.
please restock the charging handles!
Working on it! We don’t make them, we buy them from Tactical Development and they have had some manufacturing delays over the holidays.
I put a first gen sig p320 fcu in my raider and it doesn’t drop the mag easily. Have you heard any problems with the first get fcu’s
Hmm I haven’t. Not sure if the first Gen fcu’s were slightly different on tolerances. If that issue doesn’t go away definitely email me at alex@fluxdefense.com and we can see if there is some material that needs to be removed to allow the mag to drop better.
@@overtimealex69 ok I will let you know. Thanks.
Awesome!
I was about to purchase until the last line - ID10T5
hahaha
these still require the tax stamps though right?
Yup, ever since ATF passed their dumb rule
If it’s braced then no you don’t need one
Is this compatible with the p320 X-ten?
Nope. The XTen mags are too thick. We are working on a Raider chassis that will work.
Can I run the shroud with my comp?
The entire unit will detonate if you do that haha
Where can I find the SBR chassis?
The SBR chassis is exactly the same as the pistol brace version. The only difference is the end piece. The stock end piece will be available within the next two months.
@@overtimealex69 Will it be interchangeable with the brace version? i.e., can I convert a brace version to a stock version?
@@wintersguo8048 Yup exactly. Modular
Haha. Good stuff.
Thanks man!
Holsters? Please
"These idiots will watch anything" as I scroll for more videos from them
Hahaha it hurts cause it’s true
@@overtimealex69 the pain feels goood!
@@brandonsiefford6599 hahaha
When’s the Flux OnlyFans dropping to “see more”
Hahaha as soon as I hit 1k subs
@@overtimealex69 can’t wait for the OnlyFans exclusive drops lol
Haha yes!!
Good stuff
Thanks man!
order placed!
Was the gun on the left not cleared cuz the guy in glasses is shitting himself everytime he thinks hes flagged 😂
Dude...Holster...?
I just bought a third party Raider holster to see what it brings to the table. Our holster is going to be injection molded and the mold is going to be super expensive so it is taking time to save up for.
Probably overkill, but it would be sweet to see an extended piccy rail so a magnifier could be mounted along with the red dot. A guy can dream 🙂
Ive seen prototypes, something like that exist but it not on the market yet.
It definitely doesn’t make sense.
@Genesis-revelation70 it doesn’t make sense
@@overtimealex69what optic is on the black one?