Це відео не доступне.
Перепрошуємо.
How to idle 2018 Freightliner Cascadia engine idle shutdown prevention override
Вставка
- Опубліковано 6 сер 2017
- Hello everyone still looking to figure out how to idle this truck.
Your comments will be greatly appreciated.
#Freightliner #Cascadia #2018 #truckingworld #trucks #semi
Exactly how I felt, the very start of your video sums it all up lol
I went to the dealer and had them get rid of it completely. We in Canada can not survive with a small little bunk heater in -30-40 degrees. Plus it is my Truck I say when it shuts off
LionsonInc Trucker that's bull man your lucky these lazy ass holes in greely co won't get rid of idle shut down even though I'm the one fucking payin for it !! These shops are lazy and are good for nothing
Your employer has the override deactivated... You need find a new job. There's a huge demand for truckers so you should be able to find one quick
Or you can take it to doctor diesel in Effingham Illinois which is Exit 159 next to the old Wendy's he charges a hundred bucks to turn your engine idle switch and he'll also turn up your speed for you.
What’s the guys name his he still doing it for 100$
@@joshuajeter347 Yes he is. You'll be in and out in less than 30 minutes.
I had him turn my truck up 2 months ago. 15 min in and out. Should have had him turn off the idle too damn it.
What about company trucks? LMFAO
@@billywayne6104 ill do it if i go by. Fuck Schneider lmao
I thought key was really gonna work.
Me too lol
Bruh i shouldn’t laugh cause im in the same situation but this shit is funny asf lmao 😭😭😂
Release your tractor brakes if you're connected to a trailer. Take a tennis shoe and wedge it in between your accelerator and brake pedal until it revs to 600 rpm and chill. Any company that let's me sweat after the kind of miles I put up I don't care about their opinion on the temperature of the cell I'm in. 550 - 600 rpm works well with vibration and noise. Hope this helps you out.
I talked to a Swift team driver he said they take turns one guy sleeps for 4 hrs while the other guy pushes up and down on the accelerator for 4 hrs to keep it idealing. Glad I don't work for Swift😀
😂😂😂I'm dead
🤣🤣🤣🤣🤣
Lol that’s funny as hell
Lol
Unknown Trucker 😩😂 never
Read the drivers manual. It tells you how!! You keep your ac on high and the truck will turn on and off on its own. It will make sure your in cab climate is good, your battery charged and your engine oil and water at a good temp. You turn the key to the left and let it do its job. Right now its 30 F outside so its been running for 3 hours straight right now. It will turn off for like 15 mins then come back on. Can you believe some states and cities have anti-idling laws?! Kids and pets cant be left in a hot or cold car but we have to is BS! Really the laws should make these companies have generators/tripak!!!
Thank you mine don’t have a manual
If that feature is active, i tried that and my shit still shuts off
Give this man a medal! Its in setting. Find comfort mode and enable. Mines been on a while now.
Wait so turn key left you said
Opt idle doesn’t work 90 percent of the time it will come on one time get Nice and cool then cut off and never come
Back on.
Brahhhhhh I feel your pain, my truck dies this as well, I’m jus gon move along to another company I can’t and ain’t dealing with this shit! Can’t wait til I cop my own truck 🤞🏽💪🏽
Hand warmers and gorilla tape over the temperature sensor on the driver side mirror always works good for me
My company has it set to 96 degrees so the hand warmers only work for about a hour and then it shuts off, tried pulled the temp sensor but that didn’t work either. Idk
Push in the service brake, which is a yellow one turn on your cruise control in Revit up with the cruise control idol adjuster 10 rpm
How do I turn on cruise control
Optimized idle only works if the outside temperature gets above or below the set temperatures. I work for Western Express, the OPTi idle does not kick in unless the temperature drops below 35°F. This is also why I’m quitting in two weeks when my contract ends.
That’s what they tell you but it’s bulshit because at below the comfort temperature my truck was still shutting down even when I adjust the idle. I took the truck to Penske and told the company to get their truck from there since it was leased from Penske
@@Ayubsolo I’m on my 3rd company 3rd truck. The opti idle has battery mode by default and comfort mode, which makes it turn on to maintain interior comfort. Even without comfort mode, if you have an inverter and you plug in something that takes like 1500 W but put it on low it’ll keep your truck running. Example, my current company has 2,000 watt inverter. When my bunker broke down I plugged in a 1500 watt space heater but put it on low setting so not only did that heat up the truck but it also kept the engine running to keep the batteries charged. That truck I had with Western Express did not have a bunk heater or a power inverter. This comment is from well over a year ago and I didn’t know shit about these trucks back then.
A lot of people will tell you to set the trailer break and release the truck break to keep it running, that doesn’t work anymore. They have these trucks programmed precisely so the only thing you can do is something valid such as a constant high power usage in battery mode.
My name is ken. So how you get the Freightliner 2018 truck to stay idling you have to go to the vehicle settings go down to the last setting where you can't go where it says idle adjusting press okay press okay again and is going to go to the RPM press the arrow up holding until they start idling God bless
Doesn't work, however you have a temp sensor on the drivers mirror and in the bunk... Just a suggestion,,, take a 12 volt bulb, place it near the sensor on the mirror and insulate it, do the same with the bunk heater sensor . Note the temp gauge only reads to 174 on a Cascadia. Heat gun was the test mechanism, MacGyver it if you cant figure it out. Stay cool and drive safe.
Having a trailer hooked up, you should be able to release tractor brakes with trailers brakes set. I’ve been able to idle 2 whole nights in New Mexico using that trick. I’m not sure why that works with some models but different in other models.
2020 cascade it worked on this truck.
Thanks it work for my truck as well
That would be the time someone pulled my pin
How you keep it from making the noise saying to engage tractor brake?…thank you it worked but starts beeping annoyingly after a lil while
Lmao! I just put a heavy piece of metal on the accelerator adjusted ro 10 mph and I slept like a baby! Hope it helps!
😂😂Man you too funny I’m going through the same shit now I hate these new trucks
WhatHappens Experience Experience me to
left side behind ur driver side convex mirror is the outside temperature sensor unplug it she'll idle from here on out just remember to plug it back in b4 having maintenance work done
I push in tractor brake after 30 minutes my shit 🚛 cuts off again. WTF I was stuck on Wyoming hwy 70 winter month, damn bunk heater stop working. 😫😡😵
I'm about 3 years late but I just started working for this company and they have the auto shut down on this truck and I found out that the only thing that works for me is setting the trailer brakes and releasing parking brakes then put the truck to idle around 8-9 rpm. Also I have the seat belt hooked up as well I don't know if that does anything but it works for now. It kept trying to shutdown every couple minutes and it's extremely hot making me lose sleep. Btw it's a 2020 freightliner cascadia.
Thanks for sharing that. I'm in a 2020 freightliner and it is doing the same thing. Tried your suggestion and so far it's working! Thanks again.
Did this and it worked. Thanks
Comfort idle guys u gotta go to the little box truck menu 3rd from left bottom bar is comfort idle u gotta set the park function button in between the thermostat knob. And boom! the truck will keep whatever temperature u want in the truck. Regardless of the outside temperature
Doesn't work on mine. It just shuts down and won't even blow. Never turns back on to maintain comfort
I just went through it in my 2019 Cascadia. I did the one you showed to idle the engine up. You can idle it up or down using the arrows on the pad. Also my truck has a pto switch that runs absoloutley nothing and if i turn it on it will idle. I played with both of these and now for some damn reason the truck just idles all by itself without me doing anything. I have no clue wtf i did to make it do this!!!!! Freightliner said it would be a two hour charge ( $250 ) to turn the auto idle shutdown off. By the way i just did my firs night in the truck so i'm still playing with stuff.
I have a 2021 Cascadia its set up in a winch configuration so I have a PTO button i turn it on and then press the minus/set button , on the steering wheel and the truck overrides the engine shut off. I've been dealing with it for months didn't give up and found a way good luck to you.
Ols swift driver told me to pull a yellow fuse and put it back in in the morning but im here searching through videos to figure out what fuse
Lmao you sound like you need sleep before you go Awol! I laughed too hard at this video
I chock wheels release both breaks and she'll run but were set 70° hot 17° cold in texas fuck a no idle up north im chalk tire wheels
I just used a seal I got of trailer door to slide in where you put key at. It's not to thick and gets it to RPM 6.5 x100 .. perfect !!! so 650 RPM !!!
I just wedged a cigarette lighter on the accelerator to get the rpm up and left tractor brake in and so far it's working hopefully I don't start rolling anywhere
Internationalhamofmystery Thats awesome let's hope you don't end up on twisted trucker
Probably already am
As long as your trailer brakes are set, you're fine... for extra precautions I chock one drive tire and one steer tire
Dude I keep watching this we need to stand up to this def idle shut down bull shit ! Apus put more fucking fumes then clean idling does !!
Internationalhamofmystery 🤣🤣🤣
Go to the Engine Idle Adjust mode. Rise your RPM above 600 and put it between 600 and 700. This one worked on my truck. 2018 Freightliner
Alijon Irnazarov did not work
This doesn't work for all models, some it works for an hour or so then still shuts off. Especially 2019
I'm in 2018 raised idle off in 10 min. Did not work
Not work
2018 Freightliner Cascadia you pull The trailer brakes out and Push the parking brake in and then go to engine idle adjust, 3/3, press ⬆️ to 7 or 8 rpm and It will idol indefinitely
So far it worksets see for how long that'll do. I can't wait to get my peterbilt back.
It works. But why they try to control a truckers life with this crap
There is a temp sensor switch on the frame rail hear the rear . It looks like one of those connector plugs were the two plastic pieces plugged together but this one only has one plastic connector and is capped off. That is your temperature sensor if you unplug it from the end or just unplug it from the wiring harness the truck won't recognize the outside temperature and therefore will show a warning light on your dash and run basically forever
Scott Wehrman why you won’t you make a video then. Can’t find what you’re talking about
j moore they address that fix in some models around 2016, but you can run a marker light next to the temp sensor and make it think you are in 100 degree weather constantly.
I tried that as well my truck still shutdown...I don't know what to do...these company owners don't care about us as employees...only their wallets!
😂😂😂😂😂 man I thought you was gonna give me the answer! I need to idle cause it's too hot. My truck would idle at 91 degrees or more but now they changed it since gas is so expensive 😩
Hey, bro...what about hooking to a trailer, don’t put air to it and put it into N...? I had my high idle set at the dealer...so you can hit that idle adjust and it will just sit at 900...
I have optiidle but what works for me. If I set the cruise it just sets the opti idle doesn’t work. But if I hold my foot on the break and turn the cruise on then idle up. Note the cruise light will not come on but it will idle up it works here
Pull the red valve and leave the yellow one pushed in and the truck will stay on in neutral... Make sure to park on flat land
He tried that didn't work 1:00
Worked for me
Doesn’t work for me . I tried everything
The only solution I’ve found online is take it to a dealer to have the idle shutdown deactivated. I’m going to do that as soon as I BUY A TRUCK 🤦🏽♂️ The stupidest part is it shuts down if I’m at a long light, waiting for a train, or even in bad traffic. Great “feature” #sarcasm
I found out how to do it press the 2 page button it's gon say rpm then on the left steering wheel press the direction up and it idles it
Take your trailer air supply hose and disconnect it a little or take it off with the trailer brake still applied.
Say wha
It's one-degree weather in Wyoming. Truck won't idle. It shouldn't be this hard to stay warm!
It may still shut off 2 or 3 more times after that but after 3rd time it will idle all night
I know I'm 3 years or so late but I have figured this out for those who don't want to sit with your key on all night with the truck off. Some trucks are limited because of the company the truck is with. This may sound crazy but try buckling up the seatbelt. I've been doing it for a long time and haven't had any problems with the idle shut off.
Nope
The mechanic at my carrier said they were reprogramming the trucks to idle if its over 80f and if its cold out. I did not think much of it til my alternator on my apu died. It idles for like 30min. And if the temp drops under 80f, its not going to idle anyway.
I read thru the comments and tried the fixes except for messing with the temp sensor. Nothing worked.
The 2018s are set that only Freightliner can change the idle settings. Your mechanic has to call to get a code.
The computer has the settings, yes. But, the computer reads a temp gauge to know when to shut down the engine. Find and disconnect the temp gauge. Some models have two guages, so watch out for that!
You have to find the weather sensor under the driver side mirror or in back off truck on left. Disconnect it. Works every time bro🙃
John Cameron yep, I had to do that with my company truck. They won’t shut off the idle shut down. We have new ‘19 cascadias here. Disconnecting the sensor in the mirror is the only way to get comfortable sleep at night. My panel flew off in the wind. I guess I didn’t put it back on quite right, but whatever.
How to disconnect it
cali-truckdriver it’s under the driver’s side mirror. It sticks out like a little nub. In order to disconnect it, you have to remove the bottom mirror panel and unplug it. I just ended up telling my company something on the road hit the panel and the wind popped it off. Ez.
It is not right that companies do this to drivers while they are sitting comfortably at home in their air conditioning and heating at home. We have to live in these tin cans throughout the week. The least they could do is allow us the same comfort while we’re driving their freight everywhere.
i went to Engine Idle Adjust mode and it only worked for about an hour and i woke up due cold lol.....i'm sick of it
Interior comfort zone in your menu
Doesn't work on mine. It just shuts down and won't even blow. Never turns back on to maintain comfort
Take to mechanic and have the cruise control deactivate to work/ bypass n let u idle truck its in the computer settings we have same issue with our trucks
They usually put that on there because it has high miles. I do have the remedy though……. Pull out both of your knobs, push your foot on the clutch while you’re foots on the clutch hit the PTO button by the hazard lights then reach over to your right of your seat and hit the yellow PTO switch onto in position and then push in your yellow tractor brakes knob and release your foot off the clutch RPMs should go up to 900 and it will stay running
Thermostat wire is in your driver side mirror off that mirror out in disconnected your truck will idle all night
Where's the connection located? Is it directly behind the mirror? Do I need tools?
@@thhulk306 yes directly behind the mirror, no tools needed, Just pop it right off
@@thhulk306 if u have a 2019 modle you will see a small antaina looking nub sticking out on the bottom, some people tape a heating paid too it, but I disconnected mine and now my truck idles
I just tried disconnecting it and check engine light came on then red shut down came on and shut engine down.
This is fuckin hilarious. You got me crackin up. I am currently dealing with this bullshit problem. I'm in a company truck, and my shop tells me "there is no manual idle up switch. I have to put my foot on the gas."
WHAT? Are you fucking kidding me?
Ya...i figured this out the first day the truck came out...
Buy a $1.00 pair of reading glases...brake a arm off...wedge into troly valve were u supply 10psi
Put it where??
@@fki1996 he means the trailer brake lever, not the red knob. So the truck thinks your applying the brakes.
Press both top and bottom arrow at the same time press the cruise control button press accelerate it should stay on it works on my fleet trucks a green then red display will happen on the dash then you just accelerate at that screen
It's pissing me off too
Push in tractor brakes, leave trailer brakes out, put the truck in neutral. Problem solved. If you’re bobtailing then it won’t work obviously
it on the screen for engine idle adjust use the arrows on the right side of steering wheel bump ot up
switch the key on but leave the engine off, then go to vehicle settings, then Optimize setting click ok, then go to interior comfort then click ok, your truck should start automatic by itself and go to comfort idle to run all night.. this works 100%
omg, thank you.
I just transferred into an '18 and couldn't figure this shit out
@@reiclyne this goes for the 18 as well same settings
Mine don't have that
Before some other dummy says "hit the override"
THAT BUTTON IS ONLY ACTIVE WHEN YOU HAVE A RED STOP ENGINE INDICATOR... ALSO IT ONLY OVERRIDES FOR 2 MINS AT A TIME...
Love tha video bro
Found it!!!!!!! It's the parking break. Just leave it pushed in. I'll make a short vid showing what I did.
BigChevy2B worked like a charm!! Thank u!!!
BigChevy2B where's your video on that
That shit don’t work neither
It worked for my truck for exactly 11 minutes 🙄😫
Thank you!
If you cant get to a dealer to have them override the cleanidle shit bump up you idle speed to about 700 rpm it will prevent the shutdown
Try to start the cruise control at the same time you push yellow valve couple milímeters keep pushing their cruise control, release valve then cruise control.
I took this one to Freightliner. They turned the idle shut down off. Easy peasy. No more idling.
If it's a company truck they're sometimes prohibited from doing so.
When you get back to the yard go turn off the CEO a/c and office a/c and remind him how much money they would save on electricity a year
Thanks man...
Or you can try to get dddl software at dealer or regular shop to turn off for you the sutdown.
This shit pisses me the fuck off too!
That was fucking hilarious. From a Mexican to a Rican. I still haven’t figured it out either. All the other videos don’t help either.
Hey there's an update out now that let's it run n cool the truck then it shuts off for about 15-20min then cuts back on your company mechanic should know about it (October,05,2017)
It took me a awhile but u do the opt idel... it's in the dash settings
Jeremy Malding I know but mine is set so I can't access it
Mine too I can’t access it for some reason
Not all models have this setting.
Any luck figuring it out? I'm in a rental and can't figure this damn thing out!!!
BigChevy2B No sorry, this Florida heat is killing me
I’m in one now going through it!! That’s how I found this video… it’s 90 degrees and climbing smh
maybe it's already been solved. Turn on air blower on in back and in front. Go to optimize idle set it to interior comfort and it should go off then on. if the back is off then it won't work.
Optimize works for cool. But im trying to ck heat b4 it gets cold & no heat. 2018 shakin
Have you not pressed the button that literally says engine shutdown override?
It doesn’t do anything 2019 Cascadia
Damn now I won't even bother trying
The acceleration Lort 😍
I can release the truck brakes in my 587 Peterbilt while hooked to a trailer and it will stay running. Scared to do that though if you get a trailer with weak brake hold on the trailer and the thing starts rolling while sleeping
so you push the red button in and pull the yellow one out?
@@zoomba31 yellow is tractor. Red is trailer
Omg I just saw the answer.
At the engine idle adjust screen just tapthe up arrow until the rpms go up. 😅😅😅
U saw where it say rpm all u gotta do is press up on the left directional pad
Right above the yellow brake there is a button "over ride/eng shdn".
Press it. It does magic.
Thank me later.
Doesnt work.
Are u supposed to hold it? Cuz it does not work at all i held it for 12 secs and even just pressed it and nothin
@@jerryv2702 it doesnt work. This guy obviously has no clue
Aren't you a genuine genius... If that shit worked, no one would be here looking for a solution.
Yea that button only functions when you have a red stop engine light so your truck doesn't shut down in the middle of a highway where you can safely get it atleast to the next ramp AND it only overrides in 2 minute increments.. smh
Release brake and go to menu to engine idle adjust and set your rpm work on my cascadia I had same problem like you
Sebastian N Y C didn’t you see him do it , it didn’t work.
Thanks man , the tractor break worked for me on my 2019 cascadia sorry it didn't for you
For how long would it idle w/ a trailer break released ? 5 mn or 30 mn ?
@@00adama yep about 30 minutes for me and then it turns off
I'm not trying to fight with you but , my friend has one and his trick is to shut the truck off , push the throttle for 5 mins then let's it go there your idle timer shuts off and sometimes it will stay on with no acceleration at all and , if you need to be cool leave the key in the ignition to power on but engine off and there you go , and btw be great full your driving a 2018 freightliner cascadia some people like me can't even drive them for personal reasons, I can afford but my company doesn't have any authority with company truck , I can use my since the company sold it to me but I can't use something else
Yep it's hot you should like it hot
Go to interior comfort press OK..turn key to on position and bunk fan in on position...truck will run all night
Just grab the keys release parking break and crash that shit off the hills preferably
Set trailer brakes. Release parking brakes. High idle. Done.
Z PATRIOT tried that already it doesn’t work for some people
Sometimes the fucker will stay idling for hours, then sometimes it shuts off after 5 minutes,pisses me the fuck off. One time I thought it'll shut itself off so I went and watched a movie, came back and the fucker was still running
Perfect
They say these new trucks are more fuel efficient now we know why.....no idle
Your thermostat is on the driver side Mirror
Put a "hot hand" on it. I just use tape
Leave in drive release all breaks chalk tired and hook the seat belt up
I have a 2018 base model with a 10 speed. I do not have that digital screen. My truck will not high idle. I watched a video on UA-cam on how to do it doesn’t work wtf. Anybody have any ideas?
It will idle all day all night just not able to increase RPMs. Pisses me off
It worries me what will happen in winter. Will it auto correct and rev itself up? Will it not.
My last cascadia I took into the shop and had them deactivate idle shut-off.
Simple answer wood broom handle, cut to fit between the seat and pedal. Done deal!
Not for me. I just tried using something to hold the gas pedal down and the pos still went into shutdown.
Devil’s Advocate same it varies sometimes I get 1hr sometimes I get 5 minutes anyone found a solution
Thats hilarious GameVet02.. i used my box of triangles and idled all night in a blizzard…sound asleep and warm!!
@@cynthiacurley8519 Hahahahahahahaha! Love it!
Put Robert on driver seat same problem my truck 🤣🤣
If you haven't had a fix for it I drove a 2018 Freightliner Cascadia over the road on your driver side mirror right underneath it you'll see a little nipple sticking out off that little panel off unhook your temperature sensor your truck will idle indefinitely
Inside? Outside? I'm in PA and its snowing. Need to idle.
@@MsTraydale sorry for the late reply pop the panel off underneath your driver side mirror you will see the temperature sensor unplug it this will turn your check engine light on
@@jeremychastain2429 I couldn't get it off. My boss is switching me to my permanent truck and hopefully it has an apu in it. I can't sleep in the cold in VA and PA without heat! Thanks so much!
Yeah, it is ridiculous. I work in Florida. There is one thing you can do. The service guys can change it if they have permission. At least that's what my Ryder techs told me.
Did u find any solution????
You are driving a 2018 Freightliner. It comes with a feature called Optic Idle. Find the switch in your menu and initiate it. What it does it starts the truck automatically to charge the batteries and keep inside the truck cool. Then when inside the truck reach a certain temperature it shuts off automatically. Hope that helps.
PS: Check with your company and find out if they order their truck with that feature...
Shane T mine doesn’t have that opt Idle option for some reason and Freightliner doesn’t know why lol they don’t know a lot of questions that I have asked them. All they been telling me is that they have emailed Some douchebag and waiting for response since 2 months now
B S wish mine didn’t shut off. It was the opposite, it would stay ON at 25^ C and shut off at temps lower, so I went to the dealer and completely got rid of the option as it is pointless
B S I actually returned this Truck Back since it was causing a lot of issues engine wise and they couldn’t fix it.
El Venezolano Trucker not all trucks come with that option. Only the park smart model has that
Mine doesn’t either but I have a Cummins engine not the Detroit maybe that’s why. Cruise control also doesn’t work
Place your dash on cruise section then Use the arrows on the left side of the steering wheel to raise rpms boom
Yusef
Ali obviously you didn’t watch video
@@cedricwilliams5490 yeah, he didn’t watch it
The break method works for mine