Those pinch welds are in awesome condition. When mine was only 7yrs old imported from Japan they were already messed up. My plan is to repair them then weld in heavy gauge steel supports for lifting.
Hey Friend, Regarding the line at 5:18, you mentioned cutting it but not capping it or venting it. Curious what you ended up doing here. Also, if this is performed... can you now just remove the charcoal cannister underneath the intake?
When I removed the emissions crap from my supras, I capped that line to the fuel tank and got myself a vented gas cap. Helped with the fuel fumes a ton when driving. Do not cap that line without a vented cap though. Your fuel tank with expand and push up the floor in the hatch... Ask me how I know haha
When you go to tarp off the garage space for the body work booth look up “zipper wall”. It’s a nice little zipper insert you can put into the tarp to give you a zipper door to go in and out and very cheap
I will sell you a full built 2jzgte non vvti for 10k. Carrillo rods, pistons, billet mains, skinless buckets, crowed springs, crowed 272 cams, crower cam gears, ati damper, billet tension, gates belt, Phr oil pump. Arp custom age 625 head studs. All Toyota gaskets used except headgasket is cometic. New water pump.
I’m respraying my supra as we speak also doing the engine bay it takes a lot of work to get it done right you have to take everything out unused I also shave all the un used holes and did some custom fab work to clean up the engine bay
Hold It Hold It Time Out For A Sec.. Your Forgetting One Very Important Thing The Wife's Opinion What Does She Want Done To The Supra? How Does The Wife Want Her Car Done Ryan? What Is Her Vision For Her Supra? These Are Important Questions You Should Run By Her Before You Start Changing Things On Her Car. Anyway That's My Two Cents On This One TTFN Peace!!
Targa supras have stronger pinch welds than hardtops. My pinch weld got flattened when I used a jack on it lol
BrotherMan Nick same
I guess you could say your making it Supra clean 😉
I felt a little dirty giving you a thumbs up for this... just saying.
Those pinch welds are in awesome condition. When mine was only 7yrs old imported from Japan they were already messed up. My plan is to repair them then weld in heavy gauge steel supports for lifting.
Hey Friend, Regarding the line at 5:18, you mentioned cutting it but not capping it or venting it. Curious what you ended up doing here. Also, if this is performed... can you now just remove the charcoal cannister underneath the intake?
When I removed the emissions crap from my supras, I capped that line to the fuel tank and got myself a vented gas cap. Helped with the fuel fumes a ton when driving. Do not cap that line without a vented cap though. Your fuel tank with expand and push up the floor in the hatch... Ask me how I know haha
Where did you get the vented gas cap?
When you go to tarp off the garage space for the body work booth look up “zipper wall”. It’s a nice little zipper insert you can put into the tarp to give you a zipper door to go in and out and very cheap
I will sell you a full built 2jzgte non vvti for 10k. Carrillo rods, pistons, billet mains, skinless buckets, crowed springs, crowed 272 cams, crower cam gears, ati damper, billet tension, gates belt, Phr oil pump. Arp custom age 625 head studs. All Toyota gaskets used except headgasket is cometic. New water pump.
You said you’re gonna cut the fender in the next video did you mean you want to roll them? For larger setup of wheels n tires?
You still selling the plastic undertrays ??
I’m respraying my supra as we speak also doing the engine bay it takes a lot of work to get it done right you have to take everything out unused I also shave all the un used holes and did some custom fab work to clean up the engine bay
I got KW V3’s and love them. Go on amazon and watch it see if it goes on close out and get a set for under 800. It’s how I got mine ;)
Just did the hipermax 4’s myself. Love them
do you still have the alternators for sale?
HEY MAN..THIS IS A MUCH BETTER VID..IWAS WAS VERY INFORMATIVE..AND A LOT BETTER EDITING..GOOD TO SEE VIDS GETTING BETTER
How much for the cruise control module?
I’ll take one of them alternators dude. Not sure how you wanna connect. Let me know.
No ratrod mkiv. That’s what all the mk3’s do anyway! Build the car up before paint. It makes more sense that way.
Brother, I got the solution for you. I saw a portable air paint shop, you can inflate it whenever you’re working.
Btw, get some BC coilovers. Very smooth coilovers for the price.
They’re junk compared to HKS coilovers for Supras
I don't understand the computer is supras , what do they mean or what's the purpose
WHATS CRACKIN?!
Time for a brake fluid flush on that car.
Yeah that plug was bitxx lol
Let your wife paint the car whatever she like
Hold It Hold It Time Out For A Sec.. Your Forgetting One Very Important Thing The Wife's Opinion
What Does She Want Done To The Supra?
How Does The Wife Want Her Car Done Ryan?
What Is Her Vision For Her Supra?
These Are Important Questions You Should Run By Her Before You Start Changing Things On Her Car.
Anyway That's My Two Cents On This One
TTFN
Peace!!
Take $200 for new alternator?
Did this dude have some ice before doing this video?
Why is he so chatty and sounds wired AF
Whats crack-a-lackin
Rotary swapped supra
I'm first