You are a life/wallet saver. My passenger window is stuck down and I'm not about to pay $230+ to get it fixed. Just gonna remove the panel myself and get it raised back up, or even just go to the repair shop with the panel already off (along with the necessary motor) so they don't charge me as much to do that part
Love that you highlighted the location of screws and clips so clearly. I might take a stab at installing sound dampening inside my door panels now. Many kudos to you for a great video!
Hi lindah have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
After removing the door card using tips in this video, what to do with foam layer? Assume its there for sound deadening. Can it be removed non-destructively?
I ended up using a heat gun to loosen the glue around the edge. Pealed off the foam layer. Then afterwards when putting back together, reapplied the heat gun around the edge to make the glue tacky and pressed the foam layer back into place. Would have been much harder without a heat gun.
Wow your awesome and detailed!! Still couldn't pull of my left rear door of an older 2003 mitsubbishi highlander...(trying to fix stck window). Have to do more research on my car
Thank you very clear and helpful I remember once removing the panel of my BMW and under it was this Clear film stuck with butyl tape. What a mess getting that off and put it back on. I’m sure there’s a better way.
very nice informational video bro. but i have just one issue those blinking highlights are blinking too quickly and make the video uncomfortable to watch. otherwise very nice chanel and great content!
My door panel on Skoda Fabia MK1 is stuck where it joins with the window. It's impossible to get unstuck without tearing. It's that thin plastic piece that comes right between the window and the door. Any advice?
My bolt is stuck !!! It is just spinning and spinning !!!! I need to get behind it but I can’t because there is a plastic housing protecting the bolt !!!!
My family have a Adventure 2008 GLX and one time I was putting wd-40 the red long thing fall down to the inside below the window thing and I got so annoyed that I want to learn how to remove the door siding panel right side in passenger seat. I'm 17 tho and I'm transitioning to learn more about car.
The one thing I was forgetting was the screw in the door handle, I knew it was a screw somewhere up there but because I couldn’t see it I didn’t even try to go for it lol
I’m buying some aftermarket speakers for my car and they are recommending me to buy some kinda tool to take out the door panel for 20 bucks should I buy them or ?
I don’t know why they would be asking 20$ for the tool to remove the panel it should be included with the install so is find a different place or tell them to get their own tool
If you declare with your mouth, "Jesus is Lord," and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9🫶🏾🫶🏾🤍❤️❤️🙏🏾🙏🏾❤️🔥❤️🔥❤️🔥❤️🔥💯💯✝️👑❤️🔥❤️🔥😊😊😊
If you declare with your mouth, "Jesus is Lord," and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9🫶🏾🫶🏾💯🤍🤍❤️🙏🏾🙏🏾✝️👑❤️🙏🏾❤️🔥❤️🔥❤️🔥😊😊😊
Do assembly in reverse of disassembly. Take a video ad you go or take pictures of each screw/part removal as you do it and then look at pictures in reverse to reassemble door again.
You are a life/wallet saver. My passenger window is stuck down and I'm not about to pay $230+ to get it fixed. Just gonna remove the panel myself and get it raised back up, or even just go to the repair shop with the panel already off (along with the necessary motor) so they don't charge me as much to do that part
What vehicle do you drive ? I’m having the same problem
Love that you highlighted the location of screws and clips so clearly. I might take a stab at installing sound dampening inside my door panels now. Many kudos to you for a great video!
GREAT video. the fact u cover all different makes and models is KEY
Thank you for this! Just managed to fix a door handle on my Pontiac without breaking anything and this video surely helped a lot:)
Amazing video!! Really covered everything. Now I can fix my wifes door panel. I had no idea how to do it before.
63 year old single farm gal..I have to fix all. Thank you very much for your knowledge and sharing it! You teach very well too!
Hi lindah have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.
I absolutely suck at mechanical stuff but after seeing your video once I was able to remove the door panel without a problem. Thank you!
Make It Easy Mechanic:
Thank you for sharing/posting...as always, your instruction video is awesome and Ive learned a lot.
Many thanks!! very informative-I think you saved me a few thousand "cuss" words!!
Thanks so much for this, saved myself a few hundred quid and fixed my jeep. You're a life saver 🤗
Thank you for making this video. I've learned so much in just the first 5 minutes.
thank you for this approach. You give tips and tricks that take several jobs to learn doing it by yourself
Very explicit and idiot-proof explanation, a true expert. A higly deserved like.
I can not think of a single thing that could have made that video better. Excellent job. Thanks.
Thanks!
Thank you kind sir. You saved my interior from the rainy season.
This video was all I needed to get the comfidence to go ahead and install my new speakers, tomorrow :)
THANK YOU SO MUCH , Sir, Mr EXPERT ! The Lord Jesus bless your family !
Thank you very much.honestly u covered everything about door panels
After removing the door card using tips in this video, what to do with foam layer? Assume its there for sound deadening. Can it be removed non-destructively?
I ended up using a heat gun to loosen the glue around the edge. Pealed off the foam layer. Then afterwards when putting back together, reapplied the heat gun around the edge to make the glue tacky and pressed the foam layer back into place. Would have been much harder without a heat gun.
Wow your awesome and detailed!! Still couldn't pull of my left rear door of an older 2003 mitsubbishi highlander...(trying to fix stck window). Have to do more research on my car
Thanks 🙏 this helped me a lot and answered my questions! I feel more confident now ❤ God bless you
Thank you very clear and helpful
I remember once removing the panel of my BMW and under it was this Clear film stuck with butyl tape. What a mess getting that off and put it back on. I’m sure there’s a better way.
Well done! Saved me a couple of hours!
I have a ldv g10. Loving your helpful video, I was quoted $500! Still stuck tho 😢
I just found you and subscribed!! Thank you for your service and support ❤
Very useful than my training center school teacher! Thank you very much!
very nice informational video bro. but i have just one issue those blinking highlights are blinking too quickly and make the video uncomfortable to watch. otherwise very nice chanel and great content!
My door panel on Skoda Fabia MK1 is stuck where it joins with the window. It's impossible to get unstuck without tearing. It's that thin plastic piece that comes right between the window and the door.
Any advice?
ua-cam.com/video/lh7ndmQQbyI/v-deo.html
I think this is what you need
are we all here to fix a window 😂😂
Not me, just wrapping my Anterior
Man I wish my door won't close
I am
Yes sir
yes😂
Hard designs. Thx man.
Thank you so very much!😊
My bolt is stuck !!! It is just spinning and spinning !!!! I need to get behind it but I can’t because there is a plastic housing protecting the bolt !!!!
If you only need access to the top, do you still have to take out the whole thing?
Depends on the panel, but usually - yes, you do.
Brilliant video, very informative 👏
good and quality full video
My family have a Adventure 2008 GLX and one time I was putting wd-40 the red long thing fall down to the inside below the window thing and I got so annoyed that I want to learn how to remove the door siding panel right side in passenger seat.
I'm 17 tho and I'm transitioning to learn more about car.
Thanks for the video would have probably broken my door 🤣
Very useful information
The one thing I was forgetting was the screw in the door handle, I knew it was a screw somewhere up there but because I couldn’t see it I didn’t even try to go for it lol
Bravo! Excellent video
Very well done! Thank you!
Excellent video thank you so much.
awesome lesson. thank you
Wonderful explanation
Excellent video. Thanks.
very nice video sir
Good job
How when the door will not open at all?
Awesome video
Thank you.
bravo sir!
Great video. Thanks .
All that to simply remove the interior shell of a door. Smh. Over-thought, far too over-engineered and needlessly complex.
It's so you aren't able to do it yourself and have to take it in for repairs. Same thing with your phones, laptops, etc.
Not really that complex
That was super helpful!
I’m buying some aftermarket speakers for my car and they are recommending me to buy some kinda tool to take out the door panel for 20 bucks should I buy them or ?
I don’t know why they would be asking 20$ for the tool to remove the panel it should be included with the install so is find a different place or tell them to get their own tool
Thanks
Now to fix the window 😢
no BS, thank you
Thanks a lot!
Thank you.. so much
those engineers think they're supposed to play hide and seek with those screws ( ͡° ͜ʖ ͡°)
Aren't you having a hard time getting the lock in order to disconnect it to pull the panel out
2008 jeep patriot inside door panel
If you declare with your mouth,
"Jesus is Lord," and believe in your heart that God raised him from the dead, you will be saved.
Romans 10:9🫶🏾🫶🏾🤍❤️❤️🙏🏾🙏🏾❤️🔥❤️🔥❤️🔥❤️🔥💯💯✝️👑❤️🔥❤️🔥😊😊😊
Not if can't open the door at all!!
I'm going to have my regular shop switch the panels.
God bless you all
If you declare with your mouth,
"Jesus is Lord," and believe in your heart that God raised him from the dead, you will be saved.
Romans 10:9🫶🏾🫶🏾💯🤍🤍❤️🙏🏾🙏🏾✝️👑❤️🙏🏾❤️🔥❤️🔥❤️🔥😊😊😊
YesSiRr!!😎😁😊👌👊👍🔥💯
Why are there NO videos of how to put the panel BACK ON!!!! Hahaha that’s the hardest fucking part
okay soooo, how i put the door panel back on
Do assembly in reverse of disassembly. Take a video ad you go or take pictures of each screw/part removal as you do it and then look at pictures in reverse to reassemble door again.
جميل جدا تسلم
اشكرك
Thank you! Very informative.
Awesome video
Thank you for Great Video
Thank you very much