Mate hands down the best spec for the 765- no bla bla, unnecessary music, just the goods- Platinum level automotive content right here 5 ⭐⭐⭐⭐⭐ and yes it goes to 11
So you have brake buster in the foam cannon as well as the spray bottle...need to get another foam cannon for sure just for this application. Thanks for the wonderful footage, quite relaxing!!!!
Definitely no! Brake buster only in my spray bottle. I have a car soap in the foam cannon. I never put brake buster in the foam cannon. You can get a ik foamer if you want to foam brake buster. I use just normal spray bottles.
This car did have ceramic from another company. I don't think it was very good or installed correctly. It didn't bead water very well in most spots I did wetcoat and cure at the end. I think that was it because this was just a maintenance detail I believe
@@markhefter6333 thanks! I use and sell the pf22. It's on starusdetailstore.com The pressure washer is a ar blue 630tss I believe. It's expensive but incredibly reliable. Been using it for years and in winters with hot water.
@@STATUSDETAIL definitely man. I enjoy these as much as the others. It’s a great way to relax on my Sunday morning with my coffee. I watched every second.
I'll probably do a video on this soon!!! It's a really good topic I'm using very strong soap. It's a mix of gsf and geon foam. I also have a very strong pressure washer with high GPM. GPM is more important than pressure itself. The extra flow helps foam better. I also put hot water in the foam cannon. Most people have bad phone because they use bad soap or they have a bad pressure washer with low GPM
@@STATUSDETAIL I realized after posting the comment that you must be in Europe, so on 240V outlet... that makes a huge difference for electric power washers! Here in Canada with our measly 110V X 15A outlets, we are forced to use tiny motors for the PW or use a gas one. I have the same foam cannon you use and my foam is really thin even when I use a 2 GPM power washer. Now I use a 1.2 GMP one so it's even worse LOL. On the plus side, the thickness doesn't make much difference, it just doesn't look as cool ;) For my pre-wash, I always foam with a degreaser or APC to try to knock some of that road film off. I never use a neutral soap because for the wash, I always use a rinseless so I can work panel by panel in the sun. Cool video BTW, love McLarens! Have not had the pleasure of working on one yet... not many of them here in Montreal ;) Owners probably don't like streets that look like warzone with potholes everywhere ;)
@@Calendyr I'm actually in Chicago Illinois. USA. Sounds like you have a pretty good process. If you had two GPM and we're using a good soap that really should have been pretty thick foam the only other factor that would be big would be really hard or really soft water. Thanks for watching my videos 🙂👍👍
Great video as usual! A beautiful car like that deserves only the finest attention to detail. I see you tagged AmmoNYC in the video description. Are you affiliated or just a fan of their work? I live in NY and would love for you to detail my car but it’s not feasible. Do you think I could trust Ammo to just as good a job as you?
I tagged ammo because I'd like to think fans of Larry's work would also enjoy my content. Definitely no affiliation. Being compared to ammo in a way that structures my work as better than his is pretty humbling. It brings a smile to my face that someone would type that out and view Status Detail as that high end. Obviously this business is presented as high end detailing and positioned as one of the best details around. Still nice to see someone reference that who isn't me lol. I'm positive Larry would deliver a incredible detail for you!
You used a sealant, then blow dried the car.. but what was that product you used for towel drying it? A drying aid? Would using P&S BeadMaker be a good idea to use after already using a sealant on the paint?
@@STATUSDETAILcan’t you use the Hydro2 (same sealant you used before blow drying) for towel drying as well? I’m curious to know what switching to a different sealant does like gtechniq C2 or Reload2.0 for the towel drying?
@@alan5744 hydro is like WetCoat. Both are water activated. That react with water and kinda turn milky weight. So it's touchless activation to "wax" your car. Spraying it and wiping is not something I have tried because it's simply not designed to be applied that way. Might work? But not intended to be used this way.
@@STATUSDETAILso just to be sure. You used hydro2 to do a touchless seal on the car and then removed any streaks and little bit of water by towel drying with gyeon q2m quick detailer? I noticed that was the bottle you had to towel dry the car instead of the gtechniq C2 or reload2.0 you had mentioned in the previous reply.
I'm not always showing every step in every video. Previously I believe we chatted about pre foam and then a second foam. If a car isn't terrible you can rinse and foak once and then contact wash.
@@STATUSDETAIL Nice. Great content, BTW. Your videos give great communication about what's needed on the cars, why, and how to correct. Please keep doing what you're doing! Thank you.
This was a few hundred dollar maintenance detail lol. Sorry I'm not sorry my other video offended you and you feel the need to put hate into the channel. That's unfortunate because lots ofs people put good back into the channel and that's what it's all about
@@STATUSDETAIL you don’t like me calling your ridiculous pricing out. I don’t have any hate towards you. I told you earlier best of luck if they keep paying. You kept this going so i actually watched your other videos. Once again best of luck. We don’t need to keep going back and worth. I like you as a person I don’t like your pricing. We can “ learn to agree to disagree “ lol
Its amazing how peaceful and quiet is. I would love to have my weekly maintenance wash like this 😅
Me too lol. I don't wash my cars often enough actually lol
@@STATUSDETAILdo you coom to pa foor wick
Mate hands down the best spec for the 765- no bla bla, unnecessary music, just the goods- Platinum level automotive content right here 5 ⭐⭐⭐⭐⭐ and yes it goes to 11
Thank you! I'll try and make some more relaxing videos like this 🙂
@@STATUSDETAIL Epic mate well done!
I love watching a clean car getting cleaned and looking just as clean as when it was cleaned 😂
I see you understand the art of clean
So you have brake buster in the foam cannon as well as the spray bottle...need to get another foam cannon for sure just for this application. Thanks for the wonderful footage, quite relaxing!!!!
Definitely no! Brake buster only in my spray bottle. I have a car soap in the foam cannon. I never put brake buster in the foam cannon.
You can get a ik foamer if you want to foam brake buster. I use just normal spray bottles.
It's a very healing video. Good, good !!
Glad to hear it!
Great job,good work bro
Thanks!
Great video. Could you clarify what products you used post drying? Does the car have ceramic coating? Ty!
This car did have ceramic from another company. I don't think it was very good or installed correctly. It didn't bead water very well in most spots
I did wetcoat and cure at the end. I think that was it because this was just a maintenance detail I believe
Great channel and content. Thank you. Can you please recommend the pressure washer and foam cannon setup that you use? I sure appreciate it!
@@markhefter6333 thanks!
I use and sell the pf22. It's on starusdetailstore.com
The pressure washer is a ar blue 630tss I believe. It's expensive but incredibly reliable. Been using it for years and in winters with hot water.
Fantastic work !! ❤️👍
Thanks!
Great job as always love the vids. 👍
Thanks!
Next up should be a countach leather hydration video!
Then probably a dawn dish soap vidoe and a secret one I can't talk about yet!
I really enjoyed this video man. Great camera work as always too.
Should I do more like this!?
@@STATUSDETAIL absolutly you must do more videos
@@shaukatshaikh3472 👍
@@STATUSDETAIL definitely man. I enjoy these as much as the others. It’s a great way to relax on my Sunday morning with my coffee. I watched every second.
@@deconnation2206 awesome! Appreciate the feedback
Very nice work! Loved the video👏
Thanks for watching!
amazing video
Thanks for watching!!
How are you getting foam that thick? Are you running undiluted cleaners/soaps in the bottle?
I'll probably do a video on this soon!!!
It's a really good topic
I'm using very strong soap. It's a mix of gsf and geon foam.
I also have a very strong pressure washer with high GPM. GPM is more important than pressure itself. The extra flow helps foam better. I also put hot water in the foam cannon.
Most people have bad phone because they use bad soap or they have a bad pressure washer with low GPM
@@STATUSDETAIL I realized after posting the comment that you must be in Europe, so on 240V outlet... that makes a huge difference for electric power washers! Here in Canada with our measly 110V X 15A outlets, we are forced to use tiny motors for the PW or use a gas one. I have the same foam cannon you use and my foam is really thin even when I use a 2 GPM power washer. Now I use a 1.2 GMP one so it's even worse LOL. On the plus side, the thickness doesn't make much difference, it just doesn't look as cool ;) For my pre-wash, I always foam with a degreaser or APC to try to knock some of that road film off. I never use a neutral soap because for the wash, I always use a rinseless so I can work panel by panel in the sun. Cool video BTW, love McLarens! Have not had the pleasure of working on one yet... not many of them here in Montreal ;) Owners probably don't like streets that look like warzone with potholes everywhere ;)
@@Calendyr I'm actually in Chicago Illinois. USA.
Sounds like you have a pretty good process. If you had two GPM and we're using a good soap that really should have been pretty thick foam the only other factor that would be big would be really hard or really soft water.
Thanks for watching my videos 🙂👍👍
@@STATUSDETAIL I may dilute more than you do ;) I use 3 oz of soap/cleaner in the bottle which is 32 oz, so about 10:1 dilution.
@@Calendyr what soap are you using?
Great video as usual! A beautiful car like that deserves only the finest attention to detail. I see you tagged AmmoNYC in the video description. Are you affiliated or just a fan of their work? I live in NY and would love for you to detail my car but it’s not feasible. Do you think I could trust Ammo to just as good a job as you?
I tagged ammo because I'd like to think fans of Larry's work would also enjoy my content. Definitely no affiliation.
Being compared to ammo in a way that structures my work as better than his is pretty humbling. It brings a smile to my face that someone would type that out and view Status Detail as that high end. Obviously this business is presented as high end detailing and positioned as one of the best details around. Still nice to see someone reference that who isn't me lol.
I'm positive Larry would deliver a incredible detail for you!
Hey man, is it acceptable to dilute the brake buster? Or will that dilute it too much? Thanks!
You can definitely dilute it but I always use it I'm undiluted
@@STATUSDETAIL amazing. Quick response appreciate it.
@@PBrooksSawyer my pleasure
i saw the wheels and muttered “ohh shitt” cuz im p sure thats The Hamilton Collection’s 765
Correct 👍
Is that P&S Brake buster in your spray bottle? The pink stuff?
Correct!
@STATUSDETAIL Thanks for reply. 👍🙂
@@rcrbrewster7840 🤝
You used a sealant, then blow dried the car.. but what was that product you used for towel drying it? A drying aid?
Would using P&S BeadMaker be a good idea to use after already using a sealant on the paint?
I don't like bead maker. Especially in cars with real ceramic.
I usually use cure. Gtechniq c2 or reload to towel dry the last little bit of water.
@@STATUSDETAILcan’t you use the Hydro2 (same sealant you used before blow drying) for towel drying as well? I’m curious to know what switching to a different sealant does like gtechniq C2 or Reload2.0 for the towel drying?
@@alan5744 hydro is like WetCoat. Both are water activated. That react with water and kinda turn milky weight. So it's touchless activation to "wax" your car.
Spraying it and wiping is not something I have tried because it's simply not designed to be applied that way. Might work? But not intended to be used this way.
@@STATUSDETAILso just to be sure. You used hydro2 to do a touchless seal on the car and then removed any streaks and little bit of water by towel drying with gyeon q2m quick detailer? I noticed that was the bottle you had to towel dry the car instead of the gtechniq C2 or reload2.0 you had mentioned in the previous reply.
@@alan5744 you can use quick detailer too. But I personally rarely do that currently. C2 or cure is what I use currently for that step
most excellent video
I wonder if He ceramic coats His feet or washes his socks in it?
@@anoptimisticone water proof boots. Dint be ridiculous haha
Why do you contact the car when you use snow foam?
I'm not always showing every step in every video.
Previously I believe we chatted about pre foam and then a second foam.
If a car isn't terrible you can rinse and foak once and then contact wash.
@@STATUSDETAIL I see. A second foam foam as in a second coating of the same product or another product alongside gyeon foam for example
Btw is this Helios, Myan, or McLaren Orange?
Pretty sure it's papaya spark
The tag is hilarious. In the rim business?
The owner is yes.
@@STATUSDETAIL Nice. Great content, BTW. Your videos give great communication about what's needed on the cars, why, and how to correct. Please keep doing what you're doing! Thank you.
@@JamieStockman thanks 🙂🙂
Lots more coming!
There was a smudge on my screen and I thought it was on the car. I was getting progressively more pissed every time he missed it.....yes I'm ashamed.
Lol
“ touchless drying “ $14000 car wash boys and girls get in line it’s a bargain
This was a few hundred dollar maintenance detail lol. Sorry I'm not sorry my other video offended you and you feel the need to put hate into the channel. That's unfortunate because lots ofs people put good back into the channel and that's what it's all about
@@STATUSDETAIL you don’t like me calling your ridiculous pricing out. I don’t have any hate towards you. I told you earlier best of luck if they keep paying. You kept this going so i actually watched your other videos. Once again best of luck. We don’t need to keep going back and worth. I like you as a person I don’t like your pricing. We can “ learn to agree to disagree “ lol