I need a suggestion for eyes for my Chica cosplay I want it to be 3d and make almost stick out but can’t figure out what to use that I would be able to see out of
@@ItzzSpideyVR I'm not sure yet. I still have to finish my Springtrap suit, but it would probably be like 10k subs and after I am monetized. It can get pricey making a lot of these heads and suits 😭
It's all good! That's my fault, I didn't explain well. So I used plastic ornaments for the eyes, then printed out a picture of his pupil and iris. I glued his pupil/iris on the inside of half of the ornament, then painted white around it
I use leftover foam, dab it in some black paint, then press it on a paper towel or something flat that can be tossed to get some of the paint off, then dab it lightly onto the head 😁
The eyes are removable using Velcro. So those ones on him are the "show" eyes, and can be replaced with see through eyes. I can also see through the bottom of them when the show eyes are on, just not as well 😁
@@AyeJayDeeDIY ah! do you know a way i can make the mouth moveable as well i put my mouth put elastic on the sides but it doesnt rlly open only the part below my chin... and do you know any material other than plastic mesh i can use so the eyes stay round and accurate and still visibile through?
@@grandbuilds If you check the other part of the tutorial I have on this, I explain how I did the jaw, but basically I used brad pins as a way to hold them in place, then used elastic bands for better movement. You want to make sure you add the elastics when the mouth is fully closed, and make the resistance a little tight. Also for the eyes, mesh would be the most efficient way to make them see through, but you could always make a hole in the pupil where the black would be and see through that, so that way it gives it a more realistic look 😁
Thank you so much for this video! You are so talented
Of course! And thank you so much, it really means a lot!
he looks like withered freddy
Thank you, man! this was so fricking helpful
Glad I can help! Part 4 comes out later this week, so stay tuned 😁
I actually started making a cosplay today! (Freddy’s head) This video is really useful thank you!
That's awesome! Glad I can help 😁
:D@@AyeJayDeeDIY
Looks better than mine
Impossible! Freddy looks good no matter what
@@AyeJayDeeDIY true no matter what I'll always love freddy
Hey, ur Freddy series has inspired me a lot. I am going to make a lefty cosplay, I know what to start off with! Wish me luck 😅
I wish you luck!
What would you suggest for the see through eyes?
I would suggest mesh 😁
@@AyeJayDeeDIY alright, thanks a lot!
I need a suggestion for eyes for my Chica cosplay I want it to be 3d and make almost stick out but can’t figure out what to use that I would be able to see out of
What I use for mine, and what you'll see in all of my tutorials is plastic ornaments
What do you suggest using for the freddy eyes since i wanna see through it and i suck at using Velcro?
Mesh
Ok 👍
Do a Ruin freddy
Ayo ur still amazing
As always
Thank you tons! I appreciate all the support
Yo I’ve got a idea probably will not happen but you could make a turtorial how to make a Freddy suit😅
If my channel hits a certain goal 😁
@@AyeJayDeeDIYwhat number?😂
@@ItzzSpideyVR I'm not sure yet. I still have to finish my Springtrap suit, but it would probably be like 10k subs and after I am monetized. It can get pricey making a lot of these heads and suits 😭
Ok it’s just I’m building a FNAF suit and I’m not sure witchFNAF character to build “I always come back”you can choose if you want😅
Also I just subbed
Woooooooooow coooool
Thanks!
Wow This is Awesome all day gonna to be a video?
Thanks! Next video will be for the jaw and will probably be the last of the tutorial! That will come out sometime this week
What did you use to make the eyes? was there a list somewhere of materials? Did i miss it?
Go to the description of the last part of the Freddy tutorial. Here's the link: ua-cam.com/video/HCl3hkW7gv0/v-deo.htmlsi=dlj6LVXv19C9xyRc
Do ruin freddy
How do you see out of the mask?
I made the eyes removable with Velcro. So the ones shows are the "show" eyes 😁
Hey, what did you use for the eyes again? I didn't really understand it in the video sorry
It's all good! That's my fault, I didn't explain well. So I used plastic ornaments for the eyes, then printed out a picture of his pupil and iris. I glued his pupil/iris on the inside of half of the ornament, then painted white around it
@@AyeJayDeeDIYI’m 12 so I ordered about 1-2 or 1/2 yards of felt is that good or do I need more?
How do you add the black paint?
I use leftover foam, dab it in some black paint, then press it on a paper towel or something flat that can be tossed to get some of the paint off, then dab it lightly onto the head 😁
@@AyeJayDeeDIY Thank you! This helped a lot❤️!
@@What53727 of course!! Glad I can help 😁
Hey dude I have a question, how do you see through the mask?
The eyes are removable using Velcro. So those ones on him are the "show" eyes, and can be replaced with see through eyes. I can also see through the bottom of them when the show eyes are on, just not as well 😁
@@AyeJayDeeDIY ok also how did you make the hands?
@@___dont_know_a_username__6582 I didn't make hands, I just made a head
@@AyeJayDeeDIY oh ok sorry looking how to make Glamrock Freddy’s hands articulated so I can control them
@@___dont_know_a_username__6582 hopefully soon I'll be making a full Freddy suit, just waiting for some materials. And that's awesome!
How do ya see
Check the description of the full tutorial
What materials and tools did you use to make Freddy's head???
check out part 1
How do u see through the eyes im doing it and all i see is white
I made them removable using Velcro, so I can take them off and switch them with another type of eye. Those ones are just the show eyes 😁
@@AyeJayDeeDIY ah! do you know a way i can make the mouth moveable as well i put my mouth put elastic on the sides but it doesnt rlly open only the part below my chin...
and do you know any material other than plastic mesh i can use so the eyes stay round and accurate and still visibile through?
@@grandbuilds If you check the other part of the tutorial I have on this, I explain how I did the jaw, but basically I used brad pins as a way to hold them in place, then used elastic bands for better movement. You want to make sure you add the elastics when the mouth is fully closed, and make the resistance a little tight. Also for the eyes, mesh would be the most efficient way to make them see through, but you could always make a hole in the pupil where the black would be and see through that, so that way it gives it a more realistic look 😁
@@AyeJayDeeDIY ah alright ill test it out!
@@AyeJayDeeDIY i made the elastic more tightened ans kinda very but the middle part of the jaw is opened instead of closed