Building a DIY Meat Curing Chamber
Вставка
- Опубліковано 20 кві 2021
- Yes, this is a long video, I know! I really went through my whole process of turning this wine fridge into a pretty wicked curing chamber - my thought process and each step of creating this beauty. It would be pretty easy to replicate this process with a similar fridge. Check it out!
Here are some of the parts I used in the build (yes, they are Canadian websites...):
A/C Infinity brand Fan: amzn.to/45cQoHJ
Conduit port on exterior: www.homedepot.ca/product/carl...
Conduit port on interior: www.homedepot.ca/product/carl...
Very similar humidifier: amzn.to/4b6Ngzu
Inkbird temperature controller: amzn.to/3KIVJhQ
Inkbird humidity controller: amzn.to/47D08fO
Combo to get both controllers: amzn.to/3shui8j
Heat wrap was purchased at a terrarium supply store (Cornel's World in Calgary, AB). Likely able to be purchased at similar stores in other cities.
You are the lucky man. I wasn’t so lucky and destroyed my brand new wine fridge by drilling the tiny hole on the same location. While I was drilling, some liquid came out from that hole. When I took the fridge apart I noticed that the copper coils ran around both sides, including the top of the fridge. So, I don’t recommend to drill any holes, unless you 100% sure that there’s no abstractions on your way.
Pretty cool!
Very nice.. you are handy and smart! We bought ours, it's called a cannatrol.
Hah! I have the exact same fridge(minus the fan at the top) i've been using as a curing chamber for a few years. I never considered your venting idea, it removed the humidity FAST! Wondering how affects the temperature? Also where did you get those heat strips?
Very Nice build! Do you have a link for those heat wraps?
How do you dry your plants? Anything fancy in that department?
Great video. Just modified an old mini fridge to a chamber myself. I used a small table fan to circulate the inside air but did not vent it. Should I buy a computer type fan?
Hi, I'm curious why you decided on a side exit turbine, its because of the smaller hole or something else? Also, after a couple of years in use, would you still recommend this method of removing humidity? I'm finishing my chamber so its time to decide about this. Thanks for your time and video!
I’m looking for that conduit part that goes on the inside of your refer that the wires run thru , please tell me where you got it and part number if possible ? I have spent hours looking for it to no avail , please help
Interesting Video and very interesting curing chamber. Is there a parts list available?
Mifght I nsuggest that if you use water 'bowls' to humidify that you add a teaspon or so of Salt to prevent stagnation.
im considering to buy a 2nd hand hand Scancool SV124x for 250usd, it's in a good condition and working, is it ok?
Would boveda packs help maintain humidity
Should have used a wifi able temp/humidity controller. To operate a small thermoelectric dehumidifier inside the fridge. And skid the fan idea.
Relative humidity is just that.. Buy a Cannatrol you won't regret it. I'm sure this works but it's so much more than humidity when drying a curing bud.
what's the function of salt blocks, do they soak the moisture or what
Are you still using your wine cabinet as a dry ager?
To bad you didn’t post links to what parts we need and where you get them
What size is the fridge?
What’s the humidity?