Hi mate thank you for watching. I like the nf12 at the moment but the standard coil is awesome as well. Best settings I find to start out with is factory settings with smoothing off and sensitivity around 8-14 nf12 and 10-17 standard coil. Then do auto tune as many times as you can be bothered up to 6 and see what it's hovering between eg* 138-124-100-162 Then I would operate the channel manually between 120 ish and 155 ish as I'm going to get it running smoothly as possible. If the channels are all over the place eg* 82-160-239-117 Then turn sensitivity down until there closer together. As for ground noise I just listen to it try pick out targets. I hope that makes some sense 😂👍 and this is just how I do it and not how to do it properly 👌
Hi mate thanks for watching 👍 I run the 7000 hard as I can handle everywhere I go. That means lots of setting changes all the time depending on the ground noise and emi throughout the day. I always start with factory settings with smoothing off and go up from there constantly checking through channels to see if there is less emi and better target response . That will keep changing throughout the day 👍
My pleasure ! You have found some ripper bitz! And to get it on video Wow! Thanks for the reply I appreciate it :), I’m still getting used to the Z after having a 45 and 5 , So far just doing that staying in factory with some volume adjustments with a booster .. When I get more comfortable I might try some different settings So far it’s amazed me the depth it can punch over the 5, I was out kingower camping for new years Glad I didn’t stay the two nights I planned on with this Storm floating about
Hey mate, I am from India I have 1 questions for you, witch device is best for gold nuggets hunting in years of 2024 I am first timer in metal detector I need your help
Hi mate, thanks for watching. The best detector is the one you can afford. But for a beginner and if you have the money, i recommend a minelab gpx6000 or gpz7000 and low budget a gold monster. All of them are very good at finding gold and I have found gold with all the detectors mentioned. Hope that helps all the best happy hunting 🍺
They say one tone of rubbish to one ounce of gold if you dig every target. I do not dig every target now but that's just experience and at the same time I could still be missing bits you just never know. If your digging targets in gold area's your doing the right thing only a matter of time 👍👌
Thank you. lots of hard work and useless dug holes but sometimes it pays off 😂 and I bet you will skip that gram bit and hit an ounce with your 6000 🤞🤞👍
Hey DTGT your killing my dreams of ever finding me self a chunker, dude WTF, bloody hell save me some won't you???, by the time i get to Vic again they will be all gone and all in your poke LOL!!!
Ripper piece’s buddy awesome happy prospecting 👍😎🇦🇺
Thanks mate👍
Great work mate.👏🏼👏🏼
Thanks mate 👍
man thats a chunk great video DTGT
Haha thanks for watching 😁 👍
Bloody oath man! The 7's noise on gold is so good! Well done, you got some nice slugs👌. Cheers Lee.
Thanks mate 👍 the 7's really do have a different sound on gold makes my knees wobble 😂😂
Hi mate great you tube clips, do you have any advice on settings for the 7000. We have both nf coils but at present seem to prefer the minelab coil.
Hi mate thank you for watching. I like the nf12 at the moment but the standard coil is awesome as well.
Best settings I find to start out with is factory settings with smoothing off and sensitivity around 8-14 nf12 and 10-17 standard coil. Then do auto tune as many times as you can be bothered up to 6 and see what it's hovering between eg* 138-124-100-162 Then I would operate the channel manually between 120 ish and 155 ish as I'm going to get it running smoothly as possible.
If the channels are all over the place eg* 82-160-239-117 Then turn sensitivity down until there closer together.
As for ground noise I just listen to it try pick out targets.
I hope that makes some sense 😂👍 and this is just how I do it and not how to do it properly 👌
Thanks
Hi DTGT enjoy watching your videos just subscribed! Do you run the gpz flat out with lowered threshold Or do you change settings a lot?
Hi mate thanks for watching 👍
I run the 7000 hard as I can handle everywhere I go. That means lots of setting changes all the time depending on the ground noise and emi throughout the day.
I always start with factory settings with smoothing off and go up from there constantly checking through channels to see if there is less emi and better target response . That will keep changing throughout the day 👍
My pleasure ! You have found some ripper bitz! And to get it on video Wow! Thanks for the reply I appreciate it :), I’m still getting used to the Z after having a 45 and 5 , So far just doing that staying in factory with some volume adjustments with a booster .. When I get more comfortable I might try some different settings So far it’s amazed me the depth it can punch over the 5, I was out kingower camping for new years Glad I didn’t stay the two nights I planned on with this Storm floating about
Hey bruv ive been trying to call you ,good find.
Hay mate same number send me a text . I don't answer any new numbers so many scams calls these days plus you know me hopeless with phones 😂👍
Gives me hope low and slow it will come nice bits mate 🎉
There out there still just a matter of walking over them 👍 All the best thanks 👌👍
Hey mate, I am from India I have 1 questions for you, witch device is best for gold nuggets hunting in years of 2024 I am first timer in metal detector I need your help
Hi mate, thanks for watching.
The best detector is the one you can afford. But for a beginner and if you have the money, i recommend a minelab gpx6000 or gpz7000 and low budget a gold monster. All of them are very good at finding gold and I have found gold with all the detectors mentioned. Hope that helps all the best happy hunting 🍺
Few nice ones there buddy,
Thanks mate 👌
Awesome stuff mate, great job👍
@@120downunder thanks mate 👌👍
Killed it nice bro
Thank you 👌👍
Hey mate how much trash are you typically digging between gold? Im based in VIC with the 5000 but just getting constant trash
They say one tone of rubbish to one ounce of gold if you dig every target. I do not dig every target now but that's just experience and at the same time I could still be missing bits you just never know.
If your digging targets in gold area's your doing the right thing only a matter of time 👍👌
Here’s me trying to crack a gram nug with my 6000🤣😂 killing it mate well done
Thank you. lots of hard work and useless dug holes but sometimes it pays off 😂 and I bet you will skip that gram bit and hit an ounce with your 6000 🤞🤞👍
@@DTGTDetectingTheGoldenTriangle bloody hope so mate, keep up the great vids👍
Ripper slugs mate
Thanks mate 👍
Hey DTGT your killing my dreams of ever finding me self a chunker, dude WTF, bloody hell save me some won't you???, by the time i get to Vic again they will be all gone and all in your poke LOL!!!
Haha I can't find it all there will be more to be found 👌👍 thank you for watching
Ripper nuggys guys 😊
Thank you 👍👌